JCID V1S Pro Programmer for iPhone NAND Read Write
₨ 68,000
Multi-Function iPhone NAND Programmer
The JCID V1S Pro Programmer handles NAND read and write, purple screen recovery and kernel data work on one bench unit. It supports BGA60, BGA70, BGA110 and BGA315 NAND packages, runs a 6-core CPU on a 64-bit Android and Linux dual system, and includes a 4.0-inch touch display. You can run it standalone or connect it to a computer. It works with Pro1000S, P13 and V1SE adaptors, and a separate WiFi activation module extends WiFi unbind to iPhone 12 and newer. Built for repair shops that need precise iPhone data work.
In stock
The JCID V1S Pro Programmer is a multifunction iPhone NAND programmer for mobile repair that covers NAND read and write, purple screen recovery and kernel data work on one unit. You get BGA60, BGA70, BGA110 and BGA315 NAND support, so the same machine handles the NAND packages found across the iPhone 6 to 14 Pro Max range. Its 6-core CPU runs a 64-bit Android and Linux dual operating system, which keeps the interface responsive when you chain several read and write jobs together. The 4.0-inch full touch HD display lets you work standalone, while the computer online mode gives you a second option when you prefer a PC workflow. Dual-mode 2.4G and 5G WiFi keeps the unit connected for high-speed network operation and software updates. Its compact 116.6 × 131.4 × 19.4 mm body fits a crowded bench without taking over your workspace. Technically, the V1S Pro sits within the JCID programmer family alongside the V1SE, Pro1000S and P13. It is compatible with all models and adaptors of those three tools, and the manufacturer notes that most Pro1000S modules and V1S or V1SE boards also work on the V1S Pro. That compatibility matters for a shop that already owns older JCID hardware, because you can extend the bench without buying a second programmer. Software updates have continued through the JCID blog, with releases listed up to version 1.99 and additions such as 15-series photosensitive FPC activation, 7 and 8 series screen tests, and iPad screen read and write. In a typical workflow, the programmer sits at the diagnostic stage. Before you start a job, confirm the model and NAND package on the board, because the correct socket and adaptor depend on it. You read the NAND from a dead phone or a boot loop issue, check factory code and kernel data, then write the corrected data back before the board returns to testing. Keep an original NAND backup where the device allows it, so you can compare data after a write and confirm the repair without guessing. As a purple screen repair tool, the V1S Pro offers a purple screen mode that lets you recover many devices without full dismantling, which saves bench time when the customer is waiting. The mobile fault detection function also helps you narrow down whether the fault lies in software data or in hardware before you commit to board work. WiFi unbind is a common job on iPhone 12 and newer, and the V1S Pro supports one-key unbind for rear camera read and write on 12 and 13 series devices. WiFi unbind on newer models needs the separate JCID V1S PRO WiFi Activation Module, which the manufacturer lists for iPhone 12 to 16 series and iPad Pro models. That module uses NAND unbinding, so it can handle a phone whose original WiFi is missing or badly damaged. For 13 and 14 series LiDAR and XR-12PM wide angle camera work, JCID sells separate adaptors. Chip-level jobs cover more than NAND. The jump-wire method reads and writes SPI and IIC chips without dismantling, and it handles 6 to 15 Pro Max baseband chips in any pin direction. The 15-series USB-C chip, sometimes called the U2 chip, is also supported. BIOS chips need an adaptor socket bought separately. For screen work, the display and touch test covers Android and iPhone full series, and True Tone and Face ID FPC data work runs through the matching adaptors. Building a complete workstation takes more than one tool. Pair the V1S Pro with a microscope for inspection, a PCB holder to keep the board stable, and a soldering station for jumper and chip work. Reballing kits, multimeters and test boxes support the board-level side of the job, while ISP pinout tools and eMMC programmers cover adjacent repair streams. As your volume grows, dedicated modules such as the JCID battery detection module for 6 to 14 Pro Max extend the same platform without adding a new programmer. Use the V1S Pro as the core of your iPhone data repair station, and build the rest of the bench around the faults you see most often.
| Weight | 0.49 kg |
|---|
Key Features
- ✓BGA60, BGA70, BGA110 and BGA315 NAND read, write and unbind
- ✓6-core CPU with 64-bit Android and Linux dual operating system
- ✓4.0-inch full touch HD display with standalone and computer online operation
- ✓Dual-mode 2.4G and 5G WiFi for high-speed network connection
- ✓Purple screen recovery without dismantling, plus mobile fault detection
- ✓12 and 13 rear camera read and write with one-key unbind
- ✓Jump-wire read and write for SPI and IIC chips without dismantling
- ✓TF card expansion support
Specifications
| Brand Entity | JCID |
|---|---|
| Product Entity | JCID V1S Pro Programmer (Multifunction Programmer) |
| Technology Entity | 6-core CPU, 64-bit Android and Linux dual OS, BGA NAND read/write, jump-wire chip read/write |
| Compatible Device Entities | iPhone 6 to 14 Pro Max, iPhone 12 to 16 series WiFi unbind, iPad Pro, Pro1000S, P13, V1SE adaptors |
| Repair Process Entity | NAND read and write, kernel data restore, purple screen recovery, WiFi unbind, factory code check |
| Industry Entity | Mobile phone repair tools, iPhone board-level repair |
Common Repair Uses
- ✓NAND read and write for dead phone and boot loop cases on BGA60, BGA70, BGA110 and BGA315 packages
- ✓Purple screen recovery without full dismantling
- ✓Kernel data read and write and factory code checking
- ✓WiFi unbind on iPhone 12 and newer using the WiFi activation module
- ✓Rear camera read and write on 12 and 13 series devices
- ✓Jump-wire read and write for SPI, IIC and 6 to 15 Pro Max baseband chips
- ✓Screen display and touch testing on Android and iPhone
- ✓Battery and FPC data read and write with compatible adaptors
Compatible Devices
- ✓Scoped to manufacturer-listed models and verified adaptor compatibility
- ✓iPhone 6 through iPhone 14 Pro Max (manufacturer-listed range)
- ✓iPhone 15 series photosensitive FPC activation (software V1.76 and V1.79)
- ✓iPhone 12 to 16 series and iPad Pro, via the separate WiFi activation module
- ✓iPhone 16 series battery expansion adaptor, used with V1SE and V1S Pro
- ✓Adaptors and modules of Pro1000S, P13 and V1SE
- ✓Android and iPhone full series display and touch testing
FAQ
What is the product name?
What is this product used for?
Who should use this product?
Which devices are compatible with this product?
Which NAND packages does the V1S Pro support?
Can the V1S Pro unbind WiFi on iPhone 12 and newer?
Related products
AY A108 Multi-function Dot Matrix Battery Repair Programmer
Out of stock
Smart-Clip2 Basic Set with Packs 2, 3, 4, 5, 6, 7 Activated
Out of stock
UFI UFS-Prog UFS and eMMC Programmer for Mobile Repair
In stock



