JBC C210020 Conical Straight Soldering Tip 0.1mm for T210

₨ 1

JBC C210020 Soldering Tip for Fine SMD Work

The JBC C210020 is a 0.1 mm conical soldering tip with straight alignment for the JBC T210 precision handpiece. It suits pinpoint SMD soldering, micro passives, and fine-pitch joints under a microscope. The C210 cartridge uses an integrated heating element and tip geometry built for medium-power precision work. Technicians who repair mobile boards, IC pins, and small connectors will find it useful for detailed joints. Confirm your handpiece model before ordering, since the C210 series is matched to T210 handpieces.

Out of stock

19 People watching this product now!
Description

JBC C210020 Soldering Tip for Precision SMD Repair

The JBC C210020 soldering tip is a 0.1 mm conical tip with straight alignment, built for the JBC T210 precision handpiece and the C210 cartridge system. When you chase a fault on a crowded phone board, a single misplaced solder bridge can ruin the repair, so you need a tip that reaches exactly where the joint sits. This tip gives you that pinpoint control on pads and pins that standard tips cannot reach cleanly. JBC designs the C210 family for precision soldering that needs medium power output. Small pads reward a steady hand and a tip that responds quickly to your adjustments. Your repair bench gets a fine-tip option for small passives, fine-pitch connectors, and detailed SMD joints under a microscope. Whether you run a busy service counter or a single technician’s bench, this tip covers the most delicate stage of board-level repair.

Tip Geometry and Heat Transfer

The 0.1 mm conical profile concentrates heat at the working apex, which suits pinpoint joints on pads measured in fractions of a millimeter. A tapered body gives you a slim working surface, so you can reach between closely spaced components without touching neighboring parts. Straight alignment keeps the tip in line with the handpiece axis, which helps your hand stay steady during long microscope sessions. The C210 cartridge includes an integrated heating element, placing the heat source near the tip so recovery stays fast after each joint. Heat transfer stays consistent when you keep the tip clean and lightly tinned before each session, which protects the surface and extends service life. Wipe the apex on a brass wool pad or a damp sponge between joints, and retin the tip whenever oxidation builds up. Good tip maintenance is part of the job, and it helps you keep joints consistent from one board to the next.

Compatibility With the T210 Handpiece and Stations

This tip fits the JBC T210 precision handpiece, and the C210 series also lists support for the T210-A and T210-NA handpiece variants. The cartridge seats into the handpiece body, so you can swap between fine chip pins and larger through-hole joints in seconds. JBC also lists the C210 cartridge for use with CD-S series stations and stands, which suits shops running more than one workstation. Confirm your handpiece model before ordering, because the C210 cartridge is matched specifically to the T210 family. Store spare cartridges in a dispenser case, such as the DC-A, to keep working surfaces protected between jobs on the bench. Keeping spares organized shortens downtime, and a ready spare keeps your workflow moving when a tip wears during a busy shift.

Where This Tip Fits Your Repair Workflow

In a board-level workflow, this tip handles the finishing stage after you have diagnosed the fault with a multimeter and microscope. You use it to reflow small SMD resistors and capacitors, clean up joints on fine-pitch connectors, and complete precision through-hole soldering. Under a microscope, your hand position and tip reach matter more than raw heat output, which makes a fine conical tip the right choice. The tip suits medium-power precision work, so it fits repairs where delicate parts need control rather than heavy heat delivery. Pair it with quality flux and fine solder wire, since clean wetting on small pads depends on the solder chemistry as much as the tip. Keep magnification on the joint long enough to confirm the solder has flowed evenly around each pad. Once the joint looks right under magnification, you finish the repair with a clean inspection and a quick functional test.

Additional information
Weight0.8 kg
Q & A
Please login to post questions

Key Features

  • 0.1 mm conical tip for pinpoint precision
  • Straight alignment matched to the handpiece axis
  • Integrated heating element in the C210 cartridge
  • Designed for medium-power precision soldering
  • Fits the JBC T210 precision handpiece family
  • Compatible with CD-S series stations and stands
  • Suited to SMD and through-hole work under a microscope

Specifications

BrandJBC
ModelC210020
CategorySoldering Tip (T210 Cartridge)
CompatibilityJBC T210 precision handpiece
TechnologyIntegrated heating element
DimensionsØ 0.1 mm conical tip

Common Repair Uses

  • Verified workflows for this tip
  • Pinpoint SMD soldering on small resistors and capacitors
  • Fine-pitch connector joint cleanup under a microscope
  • Through-hole component soldering on compact modules
  • Soldering small pads and pins where standard tips cannot reach
  • Joint touch-ups during board-level diagnosis and repair

Compatible Devices

  • JBC T210 series handpieces (verified scope: handpiece family, not device-specific)
  • JBC T210 precision handpiece
  • JBC T210-A handpiece
  • JBC T210-NA handpiece
  • JBC CD-S series station and stand
  • Not device-specific: compatibility is defined by the T210 handpiece family

FAQ

What is the product name?
The product name is JBC C210020 Conical Straight Soldering Tip 0.1mm.
What is the brand of this product?
The brand of this product is JBC.
What is the model of this product?
The model of this product is C210020.
What is this product used for?
This product is used for precision soldering of SMD and fine through-hole components.
Which devices are compatible with this product?
This product is compatible with the JBC T210 precision handpiece and the C210 cartridge system.
Who should use this product?
This product is suitable for mobile repair technicians, repair shops, service centers, and professional users.
Is this tip compatible with the T210-A handpiece?
Yes, JBC lists the C210 series for T210-A and T210-NA handpieces. Confirm your model number before ordering.
Does this tip suit microscope-based SMD repair?
Yes, the C210 series is designed for SMD work and fine components used under a microscope.