Relife RL-405 Solder Paste 138°C Lead-Free 3ml

₨ 1

Relife RL-405 Low Temperature Solder Paste for Jump Wire and CPU Work

The Relife RL-405 is a lead-free solder paste with a melting point of 138°C, built for jump wire work on motherboards, CPU soldering, and tail charger repair. You get a fine paste with a low melting point, so heat-sensitive joints and nearby plastic parts see less thermal stress during rework. It arrives in a syringe with precision dispensing needles, letting you place paste exactly where the pad needs it. The 3ml volume suits a repair bench that handles occasional micro-soldering rather than high-volume production. Use it when you want a dependable low-temperature joint for your next motherboard job.

Out of stock

12 People watching this product now!
Description

Relife RL-405 Solder Paste for Low Temperature Repair

The Relife RL-405 solder paste sits in the low temperature branch of your micro-soldering workflow, and it suits jobs where heat control decides the result. Its melting point is 138°C, which lies well below the reflow range of common lead-free alloys used on standard boards. That lower threshold matters when you work near plastic connectors, flex cables, or chips that tolerate heat poorly. You reach for this paste once the pad is prepped and clean, then apply a controlled bead before you heat the joint. Technicians who run a soldering iron or hot air station use it to build dependable joints with less thermal stress on the surrounding parts. Repair shops that handle a mix of jump wire and chip jobs find this paste useful because one syringe covers several workflows. It also gives a predictable low-temperature option without changing the whole bench setup.

Motherboard Jump Wire and Trace Repair

Jump wire repair is one of the most common reasons to reach for a fine paste like this one. When a trace breaks or a ground path disappears, you bridge the gap with thin wire, and the joint at each end must hold without lifting the pad. Tinning those pads at 138°C lets you protect the nearby board area from unnecessary heat exposure. You dispense a small amount through the matching needle, seat the wire into the paste, and heat only the joint zone. The fine texture helps you keep the bead confined to the pad rather than spreading across neighboring lines. Clean flux residue and a stable heat source matter just as much as the paste itself. Technicians often spend more time fixing a bad joint than making a good one, so a controlled paste pays off on every job. The same method carries over to tail charger repair, where charging connector pads need clean, low-stress joints. Predictable paste behavior means less time spent cleaning bridges after each job.

138°C Low Temperature Solder Paste for CPU Soldering

CPU soldering and chip-level work demand precise paste volume, and the RL-405 suits that job well. The supplier describes the paste as fine and viscous, which gives you control when you place material on small chip pads. Its 138°C melting point lowers the thermal load on the CPU and nearby components compared with higher-temperature alloys. Working at the right temperature protects the chip package, which is why low melting point pastes appear in so many micro-soldering setups. Reballing work also benefits, since the supplier lists reballing among the intended uses. The supplier also describes the formula as low in bubbles, which supports cleaner joints on pads you tin repeatedly. Keep your iron or station tip clean so heat transfers evenly across the joint. When you run a rework cycle, match the paste quantity to the pad size and inspect each joint under magnification before you move on.

Lead-Free Formula and Syringe Dispensing

The RL-405 is a lead-free paste, so it fits workshops that want to keep leaded solder out of their process. The syringe format lets you dispense directly onto the joint instead of scooping from an open jar. The package includes three dispensing needles of different calibers, so you match the bead size to the pad without buying extra tips. Its 3ml capacity gives you a practical amount for jump wire and CPU jobs at a single bench. Working from a syringe also keeps handling low and your workspace cleaner between repairs. A consistent dispensing habit reduces waste and keeps your repair bench organized. Cap the syringe after each session to limit exposure to air. A dedicated needle for each pad size keeps your joints consistent across the whole day.

Additional information
Weight0.1 kg
Q & A
Please login to post questions

Key Features

  • Low melting point of 138°C
  • Lead-free formula
  • Fine, viscous paste texture (supplier description)
  • Syringe packaging for controlled dispensing
  • Three dispensing needles of different calibers (supplier listing)
  • Low-bubble formula (supplier description)
  • Suited to jump wire, CPU, and tail charger work
  • 3ml syringe capacity

Specifications

BrandRelife
ModelRL-405
CategorySolder paste
CompatibilityUniversal, not device-specific
Supported DevicesUniversal, not device-specific (no model list verified)
TechnologyLead-free low melting point solder paste, 138°C

Common Repair Uses

  • Jump wire tinning, CPU soldering, tail charger board repair, and BGA reballing.
  • Motherboard jump wire repair
  • CPU soldering and pad tinning
  • Tail charger and charging port board repair
  • BGA reballing and chip pad preparation
  • Fine SMD pad creation on mobile boards
  • Low temperature joint repair near plastic connectors
  • Board repair where a lead-free joint is required
  • Dispensing paste into small pads through the matching needle

Compatible Devices

  • Universal scope, not device-specific. Verified use is board-level work on mobile and computer boards at the paste’s melting point.
  • Mobile phone motherboards (general scope, no model list verified)
  • Board-level CPU pads on mobile motherboards (general scope)
  • Charging port tail flex boards (general scope)
  • Fine SMD pads on mobile repair PCBs (general scope)
  • BGA chip pads used in reballing (general scope)
  • Jump wire connection points on motherboards (general scope)
  • Heat-sensitive board areas that need a 138°C joint (general scope)
  • Universal, not device-specific: no phone brand or chipset list verified

FAQ

What is the product name?
The product name is Relife RL-405 Solder Paste 3ml.
What is the brand of this product?
The brand of this product is Relife.
What is the model of this product?
The model of this product is RL-405.
What is this product used for?
This product is used for jump wire tinning, CPU soldering, and tail charger board repair.
Which devices are compatible with this product?
This product is compatible with universal, board-level use. No device-specific model list has been verified.
Who should use this product?
This product is suitable for mobile repair technicians, repair shops, service centers, and professional users.
What is the melting point of Relife RL-405 solder paste?
The Relife RL-405 solder paste melts at 138°C.
Is Relife RL-405 lead-free and suitable for motherboard jump wire repair?
Yes, the RL-405 is a lead-free paste, and suppliers list motherboard jump wire repair as an intended use.