JBC C115 Original Straight Tip for NANE/NASE Stations

₨ 1

JBC C115 Straight Tip for NT115, NP115 and AN115 Handpieces

The original JBC C115 straight tip is a cartridge built for the NT115, NP115 and AN115 nano handpieces used on NANE and NASE stations. Its straight alignment keeps the tip in line with the handpiece, which helps when you work on SMD pads under a microscope. The C115 range uses Long Life tips with sleep and hibernation modes, which JBC rates at up to five times longer service life. Pick the shape and diameter that match your joint, whether that means a fine conical tip for small components or a blade for wider pads. Each cartridge gives your repair bench consistent heat transfer for precise micro soldering.

Out of stock

20 People watching this product now!
Description

JBC C115 Straight Tip for Precision Micro Soldering

The JBC C115 straight tip belongs to the C115 cartridge family, which JBC built for precision micro soldering. If your bench runs a NANE or NASE station with an NT115, NP115 or AN115 handpiece, this cartridge gives you the fine control you need for dead phone boards, damaged pads and small components. The straight alignment keeps the tip in line with the handpiece, so you can see the joint clearly while you work under a microscope. Many technicians choose a JBC C115 straight tip for charging IC removal, jumper work and tight SMD repairs where a bent tip blocks the view. Match the shape and diameter to the pad size, and your joints come out faster and cleaner.

Heat Transfer and Long Life Construction

The C115 cartridge uses JBC Long Life tip construction, which gives you fast heat-up and strong heat transfer into the joint. You get a tip that holds its temperature under load, so solder flows quickly without raising the station setting. JBC rates the tip for a service life up to five times longer than standard cartridges, supported by its electroplating and the Most Efficient Soldering System. The plating also suits lead-free alloys, so you can run the same tip on modern boards without rapid wear. Wipe the tip on a damp sponge or brass wool between joints, and it keeps its finish for more repair jobs.

Sleep and Hibernation Modes on NANE and NASE Stations

Your station detects the cartridge in the handpiece and activates sleep and hibernation modes when you pause. Sleep mode lowers the tip temperature during short breaks, which slows oxidation between joints. Hibernation mode drops the temperature further when the handpiece rests in the stand. That protects the tip between jobs and stops wasted power when you step away to check a board or read a reference. Set the working temperature for the solder you run, then let the station manage the rest.

Shapes, Sizes and Matching the Repair Job

The straight C115 range includes conical tips from 0.1 mm and 0.3 mm, a 0.8 mm cone, a 0.6 x 0.3 mm chisel and wider blade shapes up to 3.5 x 0.7 mm. A fine conical tip suits small resistors, capacitors and fine pin work. A chisel or blade gives you more contact area for connector pins, shielding cans and wider pads. Choose the smallest tip that reaches the joint without bridging neighboring pins. Keep a second diameter at your bench so you can switch tasks without waiting.

Additional information
Weight0.1 kg
Q & A
Please login to post questions

Key Features

  • Long Life tip construction with fast heat-up
  • Strong heat transfer into the solder joint
  • Electroplated surface for lead-free solder use
  • Sleep and hibernation modes that extend tip life
  • Straight alignment for clear microscope access
  • Conical, chisel and blade shapes available
  • Multiple diameters from 0.1 mm to 3.5 mm blade
  • Designed for NT115, NP115 and AN115 handpieces

Specifications

BrandJBC
CategorySoldering Cartridge
CompatibilityNT115, NP115 and AN115 handpieces; NANE and NASE series stations
TechnologyLong Life tip with sleep and hibernation modes
Tip AlignmentStraight
Tip ShapeConical, chisel and blade (by size)

Common Repair Uses

  • Soldering SMD resistors and capacitors under a microscope
  • Charging IC removal and replacement (IC change karna)
  • Jumper lagana on dead phone boards
  • Reflowing and repairing fine pin connectors
  • Soldering shielding cans and small board components
  • Fixing pad damage and trace repairs
  • Charging port and power IC work
  • Hardware fault diagnosis through component reflow

Compatible Devices

  • Verified scope is the JBC nano handpiece and station system. Not device-specific.
  • JBC NT115 handpiece
  • JBC NP115 handpiece
  • JBC AN115 tweezers handpiece
  • JBC NANE series station
  • JBC NASE series station
  • Not compatible with C210 or C245 handles (different cartridge geometry)

FAQ

What is the product name?
The product name is JBC C115 Straight Tip.
What is the brand of this product?
The brand of this product is JBC.
What is the model of this product?
The model of this product is in the JBC C115 series; the exact code depends on the tip size.
What is this product used for?
This product is used for precision micro soldering of SMD components and fine repair work.
Which devices are compatible with this product?
This product is compatible with JBC NT115, NP115 and AN115 handpieces on NANE and NASE stations.
Who should use this product?
This product is suitable for mobile repair technicians, repair shops, service centers, and professional users.
Does the JBC C115 straight tip work with lead-free solder?
Yes. JBC states that C115 tips keep a long service life with lead-free solder alloys thanks to their electroplating.
Should I tin the C115 straight tip before first use?
Yes. Set the station to a low temperature, apply solder to the tip, and raise the temperature gradually. Never run the tip unloaded at high temperature.