TE-791 Opening Suction Cup for Mobile Screen Repair

₨ 499

Mobile Screen Opening Suction Cup for Display Separation

The TE-791 is a mobile screen opening suction cup built for lifting display assemblies off the phone frame. You press the cup onto the glass, pull evenly, and open a gap for your pry tool. It suits LCD, OLED, and glass replacement jobs on adhesive-sealed devices. You pair it with a hot plate or hot air station to soften the adhesive first. The TE-791 is an everyday bench accessory for technicians who handle display faults, cracked glass, and battery access repairs. Mechanicpk supplies it to repair shops and service centers across Pakistan.

In stock

12 People watching this product now!
Description

Mobile Screen Opening Suction Cup TE-791 for Display Removal

The TE-791 is a mobile screen opening suction cup that gives you a controlled grip on the front glass of a phone. Technicians use it at the start of display, battery, and board-level jobs, where the first lift decides how clean the rest of the repair goes. The cup grips the glass by vacuum, so you pull the screen upward without pressing a metal tool against the panel. Every display-side repair on an adhesive-sealed phone starts with this step. A reliable grip here protects the flex cable, the frame, and the digitizer edge.

Where the Suction Cup Fits in the Display Removal Workflow

You use the TE-791 after you heat the screen and before you slide a pry tool under the bezel. Heat softens the adhesive that bonds the display assembly to the frame. The suction cup then lifts one edge by a small margin, and that gap gives your opening pick room to enter. Without it, you push a blade into a sealed seam and risk damaging the glass or the frame. The cup also keeps your fingers off hot glass during the lift. Once the pick is in, you release the vacuum and continue around the perimeter.

Handling Glued Displays and Glass Back Panels

Modern phones seal both the front display and the back glass with adhesive, and both need a controlled first lift. The TE-791 grips any flat, smooth glass surface, which covers most front screens and many glass back panels. Clean the glass before you press the cup down, because dust, oil, or fingerprints weaken the seal. A cracked screen leaks air, so you cover the cracks with clear tape before you apply the cup. Press the cup flat, pull straight up, and keep the force even. A tilted pull concentrates stress on one corner and increases the chance of cracking the panel further.

Pairing the TE-791 with Heat and Prying Tools

A suction cup works best as one part of a three-tool sequence: heat, grip, pry. Set your hot plate or hot air station to a safe temperature for the display type, and avoid overheating OLED panels. Apply the cup while the glass is warm, lift a small gap, and slide in your pick. If you work through screen replacements all day, keeping the TE-791 next to your pry tools and screwdriver set speeds up every job. After separation, you move on to disconnecting the battery, removing the display flex, and testing the new panel before sealing.

Why Technicians Keep a Spare on the Bench

A suction cup is a consumable accessory. Dust and adhesive residue build up on the rim, and you replace the cup when the seal weakens. Keeping a spare TE-791 means a failed grip never stops a job in progress. It also costs little compared with the display panels it protects. Pair it with other opening and PCB repair accessories from Mechanicpk to build a complete bench setup.

Additional information
Weight0.4 kg
Q & A
Please login to post questions

Key Features

  • Vacuum grip on flat glass surfaces
  • Hand-operated, with no power supply needed
  • Opens the first gap for a pry tool
  • Keeps fingers off heated glass
  • Reduces blade pressure on the display edge
  • Reusable across many repair jobs
  • Fits into a heat, grip, and pry workflow
  • Suits both front displays and glass back panels

Specifications

ModelTE-791
CategoryMobile Repair Opening Tools
CompatibilityUniversal — not device-specific
TechnologyVacuum suction grip

Common Repair Uses

  • Lifting the display assembly for LCD replacement
  • Lifting the display assembly for OLED replacement
  • Replacing cracked front glass
  • Opening a phone for battery replacement
  • Removing the display to access the motherboard
  • Lifting glass back panels
  • Opening a phone for charging issue diagnosis
  • Opening a phone for display problem diagnosis

Compatible Devices

  • Universal — not device-specific. Works on devices with flat, smooth glass surfaces.
  • Smartphones with adhesive-sealed front display assemblies
  • Smartphones with glass back panels
  • Phones with cracked screens, once you cover the cracks with clear tape
  • Phones that need battery access through the display side
  • Phones with LCD displays
  • Phones with OLED displays
  • Phones that need a display lifted for flex cable replacement
  • Tablets and other devices with flat glass, within the grip limits of the cup

FAQ

What is the product name?
The product name is TE-791 Opening Suction Cup.
What is the model of this product?
The model of this product is TE-791.
What is this product used for?
This product is used for lifting display assemblies and glass panels from mobile phones during repair.
Which devices are compatible with this product?
This product is universal and not device-specific. It works on devices with flat, smooth glass surfaces.
Who should use this product?
This product is suitable for mobile repair technicians, repair shops, service centers, and professional users.
Does the TE-791 suction cup grip a cracked phone screen?
A cracked screen leaks air and weakens the vacuum seal. Cover the cracks with clear tape before you press the cup onto the glass, then pull evenly.
Do I need a hot plate or hot air station with the TE-791 for glued displays?
Yes. The cup only provides the grip and produces no heat. You soften the adhesive with a hot plate or hot air station first, then lift a gap with the cup and slide in your pry tool.