RF4 RF-PO11 Heat Resistant Silicone Pad 450x300mm
₨ 2,499
RF-PO11 Silicone Pad for Mobile Phone and PCB Rework
The RF4 RF-PO11 gives you a 450 × 300 mm silicone work pad for mobile phone and PCB rework. It handles heat up to 500°C, so your hot air and soldering work stays controlled on the surface. Its anti-static, flame-retardant silicone resists corrosion and wear. You can wipe it clean with thinner or PCB cleaner after flux work. Several holes hold screws, IC chips and small parts in place during a board teardown. Use it as a daily base for BGA removal, component replacement and motherboard service.
In stock
RF-PO11 Heat Resistant Silicone Pad for Your Repair Bench
The RF4 RF-PO11 heat resistant silicone pad gives mobile technicians a stable, clean surface for board work. Its 450 × 300 mm area holds a motherboard, a microscope, and your tweezers and small parts at the same time. The silicone tolerates 500°C, which matters when your hot air gun or soldering iron runs close to the surface for long sessions. You get a workspace that resists heat, limits static, and stays tidy between jobs. This page explains where the pad fits in your repair workflow and what the material handles.
Heat Tolerance and Anti-Static Surface
Rework stresses a bench surface quickly. Hot air nozzles and soldering tips throw heat onto whatever sits below them, and cheaper mats bulge or scorch. This pad handles 500°C during BGA removal and IC reballing, and it resists bulging under that heat. The silicone is anti-static, which lowers the risk of discharge reaching a sensitive board while you probe or move components. Its flame-retardant formulation and corrosion resistance add a safety margin when flux and solder residue build up. Keep the pad under the board during reflow work, and check the surface after long hot-air sessions.
Storage Layout and Daily Bench Workflow
A busy bench fills up fast with screws, shields and loose ICs. Several holes on the RF-PO11 hold screws, IC chips and small parts in fixed positions, so nothing rolls off during a teardown. The large usable area keeps your hot air tip, tweezers, flux and multimeter within arm’s reach. Set the motherboard on the pad before you lift any component, then drop removed screws into their holes so you can match them during reassembly. Losing one tiny screw can cost you more time than the whole repair step. The pad also protects the desktop beneath it from scalding and solder splatter.
Cleaning, Memory and Long-Term Durability
Flux, solder splatter and thinner residue collect on repair mats after every job. You can wipe the silicone with thinner or PCB cleaning solution, and the surface holds up to that cleaning. The material is memory-repairable and wear-resistant, so light surface marks can recover over time instead of leaving a permanent dent. Store the pad flat and keep sharp tools away from it to extend its life. Replace it once the surface turns sticky or develops deep cuts that trap debris. Regular care keeps this work surface reliable across many repair cycles.
| Weight | 1.0 kg |
|---|
Key Features
- ✓Rated for 500°C high-temperature resistance
- ✓Anti-static silicone surface
- ✓Multi-functional storage with holes for screws, IC chips and small parts
- ✓Anti-wear and memory-repairable silicone
- ✓Flame-retardant material
- ✓Corrosion-resistant, no-bulge construction
- ✓Wipe-clean with thinner or PCB cleaner
- ✓Large 450 × 300 mm working area
Specifications
| Brand | RF4 |
|---|---|
| Model | RF-PO11 (RF-P011) |
| Category | Repair Work Mats |
| Compatibility | Universal — not device-specific |
| Technology | High-temperature resistant, anti-static silicone |
| Material | Silicone |
| Dimensions | 450 × 300 mm |
Common Repair Uses
- ✓Protecting the bench during hot air IC removal
- ✓Holding screws, IC chips and small parts during teardown
- ✓BGA reballing setup on a motherboard
- ✓Soldering and component replacement on phone PCBs
- ✓Work surface for microscope-based inspection
- ✓Cleaning board residue with thinner or PCB cleaner after flux work
- ✓Organizing tools and small parts during reassembly
- ✓Protecting the desktop from heat and solder splatter
Compatible Devices
- ✓Universal — not device-specific. The pad fits any board or device that fits its surface.
- ✓Mobile phone motherboards of any brand (surface fit, not device-specific)
- ✓Tablet logic boards
- ✓Laptop and desktop PCBs
- ✓Smartphone and tablet BGA chip work
- ✓Hot air rework and soldering stations
- ✓Microscope-assisted board repair
- ✓Small component and IC work
- ✓PCB service repair benches



