Kailiwei K-505 60W Digital Soldering Iron

₨ 2,000

60W Digital Soldering Iron for Board-Level Repair

The Kailiwei K-505 is a 60W digital soldering iron with an LCD display, a PTC ceramic heating core, and a separate temperature sensor. It adjusts from 180°C to 480°C, so you can match the setting to the solder and the joint you work on. The ceramic core heats quickly and holds steady output through long sessions at the repair bench. It accepts 110V to 220V input, which covers Pakistan’s mains supply, and it carries CE certification. Use it for jumper wires, connector joints, and pad work on mobile boards.

Out of stock

11 People watching this product now!
Description

60W Digital Soldering Iron for Mobile Repair Benches

The Kailiwei K-505 60W digital soldering iron suits technicians who solder mobile phone boards every day. Its PTC ceramic heating core and dedicated temperature sensor work together to bring the tip up to temperature quickly and hold it there. The LCD display shows the working temperature, so you set the iron by reading a number rather than guessing. In a typical repair, this iron handles the soldering stage: after diagnostics identify the fault and before you test the board again. A reliable 60W digital soldering iron keeps joints consistent, which matters on crowded boards where one cold joint sends a technician back to the start.

Heating Core and Temperature Control

The K-505 pairs a PTC heating element with a temperature sensor, so the iron measures its own heat and adjusts output to hold the set point. You set the target with the silicone adjustment button, and the range runs from 180°C to 480°C. Set the iron lower for delicate pads and thin traces, then raise it for heavier joints on connectors and wire terminals. The LCD display confirms the temperature before you touch a joint, which saves time on a busy bench. Constant regulation reduces the overheating that lifts pads and damages nearby components. Consistent heat also gives you cleaner, more predictable solder joints across a full day of repairs.

Kailiwei K-505 Power, Build, and Handling

The iron draws 60W and accepts 110V to 220V input, so it runs directly from Pakistan’s 220V supply without a separate converter. The handle has an ergonomic shape and an on/off switch within reach of your grip, which reduces fatigue during long soldering sessions. The manufacturer uses anti-static materials to protect both the operator and sensitive components on the board. The listed package dimensions are 31 × 8 × 6 cm, so the unit fits a standard repair mat without crowding your hot air station or microscope. Keep the handle dry and the cable clear of the tip zone, and store the iron on a stand when you pause work.

Where It Fits in Your Repair Workflow

This iron covers the joint-level work that follows fault diagnosis and component removal. Use it to solder jumper wires onto board pads, reflow charging port and connector joints, and re-tin pads after a component comes off. It also finishes solder joints after hot air rework, which gives you a clean base before you reconnect a board. Pair it with a multimeter for continuity checks and a microscope for fine-pitch inspection. If your work moves toward full IC replacement, a hot air station handles the chip removal stage, while this iron finishes the surrounding joints. Repair shops that handle both board-level soldering and IC work often keep this iron at the soldering position and the hot air station beside it.

Additional information
Weight0.5 kg
Q & A
Please login to post questions

Key Features

  • 60W output for fast heat-up on board-level joints
  • Adjustable range from 180°C to 480°C
  • LCD digital display showing working temperature
  • PTC ceramic heating core with a dedicated temperature sensor
  • Silicone adjustable temperature button
  • On/off power switch on the handle
  • Ergonomic handle for extended bench sessions
  • CE certified, with anti-static materials

Specifications

BrandKailiwei (KaiLiWei)
ModelK-505
CategorySoldering Irons
CompatibilityUniversal — not device-specific
Supported DevicesMobile phones, computers and laptops
TechnologyPTC ceramic heating core with temperature sensor, LCD digital display, 180°C to 480°C range
Input Voltage110V to 220V
Power Rating60W
Dimensions31 × 8 × 6 cm

Common Repair Uses

  • Soldering jumper wires onto mobile board pads
  • Reflowing charging port and connector joints
  • Re-tinning pads after component removal
  • Resoldering speaker and microphone contacts
  • Repairing cracked solder joints on connectors
  • Attaching test wires during board-level diagnostics
  • Finishing solder joints after hot air rework

Compatible Devices

  • Universal, not device-specific. The manufacturer lists no model-level compatibility.
  • Mobile phone board-level repair (listed application)
  • Computers and laptops (listed application)
  • Through-hole and pad soldering on electronics boards
  • Wire and connector solder joints
  • Universal — not device-specific; no model-level compatibility is listed

FAQ

What is the product name?
The product name is Kailiwei K-505 60W Digital Soldering Iron.
What is the brand of this product?
The brand of this product is Kailiwei (KaiLiWei).
What is the model of this product?
The model of this product is K-505.
What is this product used for?
This product is used for soldering and joint finishing on mobile phone boards and electronics.
Which devices are compatible with this product?
This product is universal and not device-specific. The listed applications are mobile phones, computers, and laptops.
Who should use this product?
This product is suitable for mobile repair technicians, repair shops, service centers, and professional users.
Does the Kailiwei K-505 work on Pakistan’s 220V power supply?
Yes. The listed input range is 110V to 220V, which covers Pakistan’s 220V mains supply.
What temperature range does the K-505 reach for lead-free solder work?
The K-505 adjusts from 180°C to 480°C, so you can set a temperature within that range for your lead-free solder and joint size.