OSS Team C210-002 Soldering Iron Tip for T210 Handle

₨ 650

C210-002 Soldering Iron Tip for SMD Repair

The OSS Team C210-002 soldering iron tip is a bent, pointed cartridge tip built to the C210 standard. The heating element sits inside the tip, so it fits T210-style handles and C210-interface soldering stations. The pointed, angled profile gives you clear access to tight pads, IC leads, and flex connector contacts on compact smartphone boards. Pair it with a microscope and a stable soldering station for fine-pitch rework, jumper wire repairs, and charging section touch-ups. Check that your handle uses the C210 cartridge standard before ordering, because 900M-style tips use a different fitment.

Out of stock

14 People watching this product now!
Description

C210-002 Soldering Iron Tip for Fine-Pitch Phone Board Work

The OSS Team C210-002 soldering iron tip follows the C210 cartridge standard, which places the heating element inside the tip instead of the handle. You slide the cartridge into a T210-style handle and replace the whole heating unit whenever the tip wears out. The 002 profile is a pointed, bent conical shape. It reaches pads that straight or chisel profiles block, so it suits dense component zones on modern smartphone mainboards. If your bench runs a C210-interface station for SMD work, this tip covers the precision end of your tip set.

C210 Cartridge Design and Handle Fitment

C210 is a cartridge standard. The heater lives in the tip itself, which differs from 900M-style tips that slip over a heater built into the handle. The two types do not swap, so confirm your iron before you buy. This tip belongs to the C210 family used with the JBC T210 handle and with several C210-interface stations and handles sold in the Pakistani market.

Seat the cartridge fully in the handle with the station powered off and the handle cool. A tip that sits loose transfers heat poorly and gives uneven soldering results. The C210 series suits precision jobs with medium power demand, which matches phone repair: small joints, short heat cycles, and frequent switching between pads.

Where the Bent Conical Profile Helps on Smartphone Boards

The pointed tip concentrates heat on a small contact area. You control how much heat reaches a pad and how much reaches the neighbouring components. That control matters on boards where capacitors, resistors, and IC leads sit close together.

Technicians use this profile for fine-pitch IC lead soldering, flex connector pad repair, and charging port area touch-ups on a phone with a charging issue. It also handles jumper lagana on lifted tracks and damaged pads after a display problem or liquid damage. The bent angle lets you hold the handle at a comfortable angle under a microscope, so your hand does not block the view of the joint.

Use it on phones from any brand, since the tip works on solder joints rather than on specific models. Tin the tip before each session, apply flux to the pad, and heat the joint just long enough for the solder to flow. Long dwell times lift pads on thin boards, and a pointed tip gives you the control to avoid them.

Setup, Cleaning, and Tip Life

Install the tip when the handle is cold. Clean it before and after every session on brass wool or a damp cellulose sponge, then tin it again before you set the iron in its stand. A tip that carries oxidation transfers heat poorly, so clean and re-tin it when you notice slow solder flow. Never leave the iron idling at working temperature without solder on the tip.

Build a complete bench around this tip. A soldering station with a C210 interface, a microscope, a PCB holder, a multimeter for continuity checks, and a hot air station for larger ICs cover most board-level repairs. If you also work on BGA parts, a reballing kit handles what a pointed tip cannot.

Additional information
Weight0.1 kg
Q & A
Please login to post questions

Key Features

  • C210 cartridge standard with the heating element built into the tip
  • Pointed, bent conical profile for tight pad access
  • Fits T210-style handles and C210-interface stations
  • Suits SMD work under a microscope
  • Angled shape keeps the joint visible during soldering
  • Replaceable cartridge format for quick tip changes
  • Works on boards from any phone brand
  • Supplied as a single soldering iron tip

Specifications

BrandOSS Team
ModelC210-002
CategorySoldering Iron Tips
CompatibilityJBC T210 handle and C210-interface soldering stations
TechnologyC210 cartridge design with heating element integrated in the tip

Common Repair Uses

  • Fine-pitch SMD soldering and board-level touch-up work under a microscope.
  • Fine-pitch IC lead soldering
  • Small SMD capacitor and resistor replacement
  • Flex connector pad repair
  • Charging port area soldering for charging issues
  • Jumper wire repair on damaged tracks
  • Lifted pad repair
  • Board cleaning and solder cleanup around ICs
  • Microscope-assisted precision soldering

Compatible Devices

  • Universal for soldering work on smartphone boards — not specific to any phone model. Fits C210-standard handles and stations only.
  • JBC T210-A handle
  • JBC T210-NA handle
  • Sugon T26 and T26D soldering stations
  • SUNSHINE T26 soldering station
  • YIHUA 982 PRO C210 soldering iron
  • Other C210-interface soldering stations
  • Android smartphone mainboards (any brand, universal)
  • iPhone mainboards (universal)

FAQ

What is the product name?
The product name is OSS Team C210-002 Soldering Iron Tip.
What is the brand of this product?
The brand of this product is OSS Team.
What is the model of this product?
The model of this product is C210-002.
What is this product used for?
This product is used for fine-pitch SMD soldering, IC lead work, pad repair, and jumper wire repair on phone boards.
Which devices are compatible with this product?
This product is compatible with the JBC T210 handle and soldering stations that use the C210 cartridge interface. It works on any smartphone board.
Who should use this product?
This product is suitable for mobile repair technicians, repair shops, service centers, and professional users.
Does the C210-002 tip fit a 900M or C245 soldering iron?
No. C210 is a separate cartridge standard with the heater inside the tip, so it does not fit 900M-style irons or C245 handles. Use it with T210-style handles and C210-interface stations.
Is the C210-002 tip suitable for fine-pitch SMD work on phone boards?
Yes. The pointed, bent conical shape suits small pads, IC leads, and flex connector contacts, especially when you work under a microscope.