Relife RL-004FB Dot Matrix Repair Pad iPhone X-14 Pro Max
₨ 799
Relife RL-004FB Dot Matrix Silicone Pad
The Relife RL-004FB dot matrix repair pad gives your bench a heat-resistant silicone surface with a fixed slot that holds iPhone dot matrix modules steady during rework. It covers iPhone X through iPhone 14 Pro Max, so one pad serves Face ID, camera, fingerprint, BGA and CPU IC soldering jobs across five generations. The 500°C silicone resists swelling, flame and corrosion, and it protects your work surface under hot air and iron heat. Mechanicpk supplies this Relife pad to Pakistani repair shops and service centers that want repeatable positioning and a safer bench for iPhone board work.
In stock
Relife RL-004FB Dot Matrix Repair Pad for iPhone Face ID and Board Rework
The Relife RL-004FB dot matrix repair pad turns a loose, shifting dot matrix module into a fixed, workable part. Relife molded a slot into a high-temperature silicone mat, and that slot holds the module in place while you apply heat and work. It supports iPhone X through iPhone 14 Pro Max, so you keep one positioning tool on your bench instead of improvising with tape or spare PCB offcuts. Mechanicpk stocks it for technicians who handle Face ID faults weekly and want the same setup every time.
Fixed-Slot Positioning for Dot Matrix Modules
A dot matrix projector module is small, fragile and sensitive to rough handling. Every time it slides under your tweezers, you risk damaging the module or the flex around it. The fixed slot on the RL-004FB removes that variable. You seat the module, it stays put, and both hands stay free for the iron, the hot air nozzle or the microscope controls.
Relife specifies the slot for module positioning, disassembly and maintenance across the iPhone X to 14 series range. That scope matters when your shop sees mixed models in one day. You do not swap fixtures between an iPhone 11 Face ID job and an iPhone 13 Pro Max job. You reach for the same pad.
500°C Silicone Built for Hot Air and Iron Work
The pad uses a newer silicone formulation that Relife rates for high temperature resistance up to 500°C. The material resists swelling, so the surface stays flat after repeated heat cycles. It also resists flame and corrosion, which protects your bench from flux splatter and stray solder.
You place the pad under your work, point your hot air station at the module or chip, and rework without scorching the table or warping the surface under the part. The silicone grips the board and module, which cuts the sliding that wastes time during delicate removal and refitting. Pair it with a Hot Air Station for controlled airflow and a Soldering Station for pad cleanup, and you cover heat, hold and finish in one setup.
Where It Fits in Your Repair Workflow
Relife positions the RL-004FB for BGA, camera, Face ID, fingerprint and CPU IC chip soldering repair on iPhone X to 14 Pro Max boards. On a typical Face ID hardware fault, you open the phone, pull the dot matrix module, place it in the slot and work on it under magnification. On a camera board or CPU job, you use the same pad as a heat-safe, non-slip base for IC change karna, pad cleaning and reflow.
The pad also supports the wider PCB repair routine around those jobs. Run a Multimeter check on the board before you start, mount the board in a PCB Holder when the job moves beyond the module, and step up to a Reballing Kit when a chip needs fresh balls. The RL-004FB covers the bench-surface and module-holding stage that every one of those steps depends on.
Pakistani repair shops often work on crowded benches with several phones open at once. A dedicated slot pad keeps the dot matrix module separate from loose screws, flex cables and other parts. That separation reduces lost components and mix-ups on busy days. Shop owners who train juniors on Face ID repair also gain a consistent teaching setup, because every technician positions the module the same way.
You get a practical accessory here, not a gimmick. It does one job, holds the dot matrix module and the board steady under heat, and it does that job across five iPhone generations. If your workshop handles iPhone motherboard repair regularly, the Relife RL-004FB earns its bench space quickly.
| Weight | 0.1 kg |
|---|
Key Features
- ✓Fixed slot holds the iPhone dot matrix module steady during rework
- ✓Covers iPhone X to iPhone 14 Pro Max in one pad
- ✓Silicone rated up to 500°C
- ✓Resists swelling after repeated heat exposure
- ✓Flame retardant material
- ✓Corrosion resistant surface
- ✓Supports Face ID, camera, fingerprint, BGA and CPU IC soldering repair
- ✓Frees both hands for iron, hot air and tweezers
Specifications
| Brand | Relife |
|---|---|
| Model | RL-004FB |
| Category | Repair Pad / Silicone Soldering Mat |
| Compatibility | iPhone X to iPhone 14 Pro Max |
| Supported Devices | iPhone X to iPhone 14 Pro Max dot matrix modules |
| Technology | Fixed-slot dot matrix positioning |
| Material | High-temperature silicone (flame retardant, corrosion resistant, non-swelling) |
| Heat Resistance | Up to 500°C |
Common Repair Uses
- ✓Dot matrix, camera, fingerprint, BGA and CPU IC rework on iPhone boards
- ✓Dot matrix module positioning
- ✓Dot matrix module disassembly
- ✓Face ID repair
- ✓Camera module soldering repair
- ✓Fingerprint module repair
- ✓BGA chip rework
- ✓CPU IC chip soldering
- ✓Heat-insulated bench surface under hot air
Compatible Devices
- ✓iPhone X to iPhone 14 Pro Max series (dot matrix module positioning)
- ✓iPhone X
- ✓iPhone XS
- ✓iPhone XS Max
- ✓iPhone 11, 11 Pro and 11 Pro Max
- ✓iPhone 12 series
- ✓iPhone 13 series
- ✓iPhone 14 and 14 Plus
- ✓iPhone 14 Pro and 14 Pro Max
FAQ
What is the product name?
What is the brand of this product?
What is the model of this product?
What is this product used for?
Which devices are compatible with this product?
Who should use this product?
What temperature can the Relife RL-004FB silicone pad handle?
Can I use the RL-004FB for Face ID repair on iPhone 13 and iPhone 14 Pro Max?
Related products
Qianli 011 16-in-1 Glue Removal Knife for Mobile Repair
Out of stock
RELIFE RL-004SA silicone pad – Anti-slip
In stock



