Relife RL-601S Pro Universal Pressure Holding Fixture
₨ 7,500
Pressure Holding Fixture for Curved and Flat Screens
The Relife RL-601S Pro Universal Pressure Holding Fixture clamps bonded smartphone screens and back covers while the adhesive cures. Its four-axis pressure system supports both flat and curved panels, and a metal adjustment screw lets you set the holding force by hand. A high-hardness steel spring, rated for up to 50,000 pressure cycles, keeps the clamp consistent through daily workshop use, while an anti-wear foam pad spreads contact evenly across the glass. Mechanicpk supplies the RL-601S Pro to repair shops and technicians across Pakistan who need controlled, repeatable pressure after every screen replacement.
In stock
Relife RL-601S Pro Pressure Holding Fixture for Curved and Flat Screen Bonding
The Relife RL-601S Pro Universal Pressure Holding Fixture gives your repair bench a controlled way to hold a bonded screen or back cover while the adhesive cures. This Relife RL-601S Pro pressure holding fixture clamps through a four-axis pressure system, so flat panels and curved-edge panels both receive support. You set the holding force yourself with a metal adjustment screw. For Pakistani repair shops that replace screens every day, that control separates a clean, evenly bonded panel from a lifted edge, a gap along the frame, or a display problem that returns to your counter a week after delivery.
Four-Axis Pressure System and Screw Adjustment
The RL-601S Pro distributes holding force through four axes instead of a single pinch point. That layout matters on curved-edge panels, where a two-point clamp loads the centre of the glass and leaves the curved edges unsupported. Four contact axes spread pressure across the panel and frame, which keeps the adhesive in contact around the full perimeter. A metal screw sets the holding pressure by hand. You turn it in small steps, check the panel, and stop when the bond line sits flat. Manual adjustment gives you a direct feel for the force and removes the guesswork of a fixed-pressure clamp. You can back the screw off for a delicate panel and tighten it for a stubborn frame, so one fixture serves a mixed queue of devices. Once you know the turn count that suits a particular phone, you repeat it on the next unit and keep your results consistent from bench to bench.
Spring Durability and Foam Pad Contact
The holding spring uses high-hardness steel, and the supplier data lists it for up to 50,000 pressure cycles. A high cycle rating matters in a workshop that bonds screens all day, because a spring that loses tension changes your clamping force without warning and ruins repeatability. A steel spring that holds its tension gives you the same grip on the fiftieth bond of the week as on the first. An anti-wear foam pad sits between the clamp and the panel. The pad spreads contact evenly across the surface and cushions the glass while the adhesive sets. Pairing a steel spring with a foam contact surface keeps bare metal away from the glass edges. Foam wears with heavy use, so inspect the pad regularly and stop using one that has flattened or torn, since an uneven pad undermines the even-pressure design.
Where It Fits in Your Screen and Back Cover Workflow
Technicians reach for a pressure fixture after the messy work finishes. You separate the old panel with a hot air station, clean the frame under a microscope, apply fresh adhesive, seat the new screen, and clamp it in the RL-601S Pro until the bond cures. The fixture holds both screens and back covers under pressure, so one tool covers two bonding jobs on your bench. Keep your PCB holder for the board-side work and reserve this clamp for the closing step of the repair. Shops that handle curved-screen phones gain the most, because the fixture replaces improvised weights and tape, which often leave uneven bonds and repeat visits for lifting edges. The compact body stores easily between jobs, and the manual screw mechanism needs no power, so the fixture works wherever you set up your bench.
| Weight | 2.0 kg |
|---|
Key Features
- ✓Manual pressure adjustment through a metal screw for precise control over holding force
- ✓Four-axis pressure system that supports flat and curved screens
- ✓Universal fit for flat-screen and curved-screen smartphone panels
- ✓High-hardness steel holding spring rated for up to 50,000 pressure cycles
- ✓Anti-wear foam pad that spreads pressure evenly and protects the glass during bonding
- ✓Tailored pressure delivery for curved screens that keeps curved edges supported
- ✓Multifunctional design that holds screens and back covers under pressure
- ✓Compact body that stores and moves easily around the workshop
Specifications
| Brand Entity | Relife |
|---|---|
| Product Entity | Relife RL-601S Pro Universal Pressure Holding Fixture |
| Technology Entity | Four-axis pressure system with manual metal screw adjustment |
| Compatible Device Entities | Flat-screen smartphones, curved-screen smartphones, smartphone back covers |
| Repair Process Entity | Screen bonding, back cover bonding, adhesive curing under pressure |
| Industry Entity | Mobile phone repair, screen replacement, repair workshop fixtures |
Common Repair Uses
- ✓Holding bonded screens and back covers under pressure during adhesive curing
- ✓Holding a replacement screen flat while the adhesive sets
- ✓Bonding curved-screen panels with even edge support
- ✓Pressing a back cover onto the frame after replacement
- ✓Reassembling a screen to the frame after a display problem repair
- ✓Holding a panel under controlled pressure after fresh adhesive application
Compatible Devices
- ✓Smartphones with flat or curved screens and bonded back covers (universal fixture, not model-specific)
- ✓Flat-screen smartphones
- ✓Curved-edge screen smartphones
- ✓Smartphone back covers that need bonding under pressure
FAQ
What is the product name?
What is the brand of this product?
What is the model of this product?
What is this product used for?
Which devices are compatible with this product?
Who should use this product?
How do you adjust the holding pressure on the Relife RL-601S Pro?
How long does the holding spring on the RL-601S Pro last?
Related products
JZQ-599B Soldering Iron Tip Cleaner with Tin Cleaning Ball
Out of stock
QIANLI 008 Cutting Knife Blade for BGA Underfill Removal
Out of stock



