Relife XA1 Current and Voltage Multifunctional Tester
₨ 1
Relife XA1 USB Current Voltage Tester
The Relife XA1 is a USB current voltage tester for mobile repair benches that reads voltage and current at 0.01 V and 0.01 A resolution. It covers 4 V to 25 V and up to 5 A, with 1% accuracy on both readings. Plug it between the charger and the phone, and it identifies PD, QC 2.0, QC 3.0, SCP, AP 2.4A and DCP protocols automatically. Bidirectional current sensing, Wh and Ah totals, and a compact color display give you a clear picture of every charging issue. At roughly 20.5 g, it fits your repair bench or your toolbox without taking space.
Out of stock
USB Current Voltage Tester for Mobile Repair: Relife XA1 Overview
A USB current voltage tester for mobile repair turns a charging issue from guesswork into a readable number. The Relife XA1 sits between your charger and the phone, reads voltage and current live, and names the fast-charging protocol the moment you connect. You separate a faulty cable or charger from a faulty board before anyone opens the device, which saves bench time on every charging complaint that walks into your shop.
Measurement Range and Accuracy
The XA1 measures 4 V to 25 V and up to 5 A. That span covers standard 5 V charging and the higher voltages that PD-class chargers negotiate. Voltage and current resolution sit at 0.01 V and 0.01 A, and accuracy for both stays at 1%, so small voltage drops across a worn cable show up as real numbers instead of guesses. Bidirectional current sensing reads forward and reverse flow, which helps when you check a power bank or a Type-C device that can both charge and supply power. The tester also totals energy in Wh and capacity in Ah, with a capacity range up to 9999 Ah, so you can track how much a battery actually takes during a charge session.
Protocol Identification at the Bench
On connection, the XA1 identifies PD, QC 2.0, QC 3.0, SCP, AP 2.4A and DCP. A customer says the phone charges slowly; you plug the charger through the tester and see whether it negotiates the protocol it claims or falls back to basic 5 V. You also screen weak chargers and low-quality cables before they reach a customer’s hands. The color screen shows live readings, and you switch the display off with one click or set the interface direction to match your cable layout.
Repair Workflow Fit
Charging issue complaints fill most workshop queues, and the XA1 gives you the first diagnostic reading in seconds. Connect the phone and watch the current at the moment of insertion. A dead phone that draws no current points you toward the charging port, the cable or the power path on the board. A phone that draws normal current but shows nothing on screen sends you to display or software checks instead. A reading that climbs and then drops suggests a battery or charging IC hardware fault worth chasing further. Follow up with Multimeters for board-level probing, Microscopes to inspect the port area, and Soldering Stations or Hot Air Stations when the fix needs component work.
After the repair, you verify the result with numbers. Run the same charger and cable through the XA1 again, compare the current draw with your first reading, and hand the phone back with proof that the charging issue is gone. The tester weighs about 20.5 g and measures 67 x 62 x 12 mm, so you keep one on the bench and another in your service kit.
| Weight | 0.3 kg |
|---|
Key Features
- ✓Bidirectional current detection for forward and reverse flow
- ✓Automatic identification of PD, QC 2.0, QC 3.0, SCP, AP 2.4A and DCP protocols
- ✓4V to 25V voltage range with 0.01V resolution
- ✓Up to 5A current range with 0.01A resolution
- ✓1% voltage and current accuracy
- ✓Wh and Ah power statistics with capacity range up to 9999Ah
- ✓Color display with one-click screen off and adjustable interface direction
- ✓Compact body at about 20.5 g for bench or toolbox carry
Specifications
| Brand | RELIFE |
|---|---|
| Model | XA1 |
| Category | USB Current and Voltage Tester |
| Compatibility | Universal — not device-specific |
| Technology | Automatic fast-charging protocol identification (PD, QC 2.0, QC 3.0, SCP, AP 2.4A, DCP), bidirectional current detection |
| Voltage Measurement Range | 4V – 25V |
| Current Range | 0A – 5A |
| Voltage Resolution | 0.01V |
| Current Resolution | 0.01A |
| Voltage Accuracy | 1% |
| Current Accuracy | 1% |
| Power Statistics | Wh / Ah |
Common Repair Uses
- ✓Charging fault diagnosis, cable and charger verification, and post-repair charging checks
- ✓Charging issue diagnosis on phones
- ✓Dead phone current-draw check at connection
- ✓Data cable and charger verification
- ✓Fast-charging protocol identification
- ✓Slow charging troubleshooting
- ✓Power bank output check
- ✓Battery charge capacity tracking in Wh and Ah
- ✓Post-repair charging verification
Compatible Devices
- ✓Universal — not device-specific; works with chargers, cables and devices within the 4V–25V / 5A range
- ✓Mobile phones
- ✓Chargers using PD, QC 2.0 or QC 3.0
- ✓Chargers using SCP, AP 2.4A or DCP
- ✓Data cables
- ✓Power banks
- ✓Notebooks and laptops
- ✓Type-C digital devices
- ✓Any USB charging path within the 4V–25V / 5A range
FAQ
What is the product name?
What is the brand of this product?
What is the model of this product?
What is this product used for?
Which devices are compatible with this product?
Who should use this product?
Which fast-charging protocols does the Relife XA1 detect automatically?
What voltage and current range does the Relife XA1 measure, and how accurate is it?
Related products
QIANLI 008 Cutting Knife Blade for BGA Underfill Removal
Out of stock
Qianli 011 16-in-1 Glue Removal Knife for Mobile Repair
Out of stock
RELIFE RL-004SA silicone pad – Anti-slip
In stock
UFI eMMC BGA Soldering Adapter (8 Footprints) for UFI-Box
In stock



