JCID UF6008 Chip Underfill Adhesive 5ML

₨ 2,200

JCID UF6008 Chip Underfill for NAND and CPU

The JCID UF6008 underfill adhesive 5ML seals the gap under NAND and CPU chips after you finish a reball or chip reseat. It spreads evenly beneath the package within 1-3 minutes, cures automatically, and bonds the chip to the board for stronger drop resistance. JCID made UF6008 specifically for Nand CPU packaging, so you restore an original-style package on the motherboard instead of leaving a bare, exposed chip. The 5ML pack suits repair benches that handle regular NAND and CPU jobs. Mechanicpk supplies it to technicians, repair shops, and service centers across Pakistan. Store it in a cool place at room temperature.

In stock

12 People watching this product now!
Description

JCID UF6008 Underfill Adhesive for NAND and CPU Packaging

The JCID UF6008 underfill adhesive 5ML gives your bench a dedicated chip underfill for NAND and CPU packaging work. When you reball or reseat a chip on a phone motherboard, an open gap stays beneath the package. UF6008 flows into that gap, spreads evenly under the chip within 1-3 minutes, and cures on its own. The chip ends up bonded to the PCB with an original-style package. JCID, the Shenzhen-based programmer and repair tool maker, designed this underfill for Nand CPU packaging, and Mechanicpk stocks the 5ML pack for Pakistani repair professionals.

How the Underfill Spreads and Cures

You dispense UF6008 at the chip edge, and the adhesive works its way to the bottom of the package without extra effort. JCID states that it diffuses evenly under the chip within 1-3 minutes, so you do not push or chase the material around the corners. Curing happens automatically, which frees your hands for the next board on the bench. The adhesive also softens under high temperature. That behavior matters when you reach for your hot air station, because you keep control over heat and chip handling if the board needs another visit later. You get a clean fill under the chip instead of a patchy edge bead.

Where UF6008 Fits in Your NAND and CPU Repair Workflow

Underfill belongs at the end of the chip workflow. You remove the chip with your hot air station, clean the pads under a microscope, reball with your reballing kit, and seat the chip on the board while a PCB holder keeps it steady. Test the board first. Confirm the phone powers on, clears any boot loop issue, and passes your hardware fault checks. Then apply UF6008 and let it cure. This sequence covers IC change karna jobs on NAND flash and CPU packages, and it gives the finished board a protected chip rather than a bare soldered one. Pair UF6008 with your eMMC programmers, UFS adapters, and test boxes so you finish every NAND repair with a sealed chip.

Drop Resistance and Fewer Repeat Repairs

Phones come back to the counter after drops, and chips with an open underside take that stress on their solder joints. UF6008 bonds the chip to the board with superior adhesiveness, which improves anti-dropping resistance and reduces rework. A chip that stays seated protects your reputation and cuts return visits to your shop. JCID also states that the underfill prolongs the service life of the device, which gives your customers a longer-lasting repair. Use the 5ML pack for steady daily volume. Keep it in a cool place at room temperature between jobs, and reseal it as soon as you finish dispensing. Multimeters and microscopes remain your inspection tools before and after the underfill step, so you verify the board at every stage.

Additional information
Weight0.1 kg
Q & A
Please login to post questions

Key Features

  • Made specifically for Nand CPU packaging
  • Spreads evenly under the chip within 1-3 minutes
  • Cures automatically
  • Softens under high temperature
  • Superior adhesiveness
  • Improves anti-dropping resistance
  • Reduces rework
  • Prolongs device service life

Specifications

BrandJCID
ModelUF6008
CategoryChip Underfill Adhesive
CompatibilityNAND and CPU chip packaging
TechnologySelf-diffusing underfill with automatic curing
Volume5ML
StorageCool place at room temperature

Common Repair Uses

  • Sealing the gap under NAND and CPU chips after rework.
  • Underfilling a NAND chip after reballing
  • Underfilling a CPU after reseating
  • Restoring original-style packaging after chip replacement
  • Strengthening chip bonding for better drop resistance
  • Protecting the circuit board under the chip
  • Reducing repeat repairs on drop-prone boards

Compatible Devices

  • Chip-level compatibility for NAND and CPU packages on mobile phone PCBs. The adhesive is universal and not tied to specific phone models.
  • NAND flash chip packages
  • CPU chip packages
  • BGA-style chip packages on mobile phone motherboards
  • Mobile phone PCBs from any brand that needs chip underfill
  • Chips after reballing and reseating
  • Chips that need extra mechanical bonding on the board

FAQ

What is the product name?
The product name is JCID UF6008 Chip Underfill Adhesive 5ML.
What is the brand of this product?
The brand of this product is JCID.
What is the model of this product?
The model of this product is UF6008.
What is this product used for?
This product is used for underfilling and packaging NAND and CPU chips on mobile phone PCBs.
Which devices are compatible with this product?
This product is compatible with NAND and CPU chip packages on mobile phone boards. It works at chip level and does not depend on a specific phone model.
Who should use this product?
This product is suitable for mobile repair technicians, repair shops, service centers, and professional users.
How long does JCID UF6008 take to spread under the chip?
JCID states that UF6008 diffuses evenly to the bottom of the chip within 1-3 minutes.
How should I store JCID UF6008 underfill adhesive?
Store it in a cool place at room temperature.