Mechanic 2nd Magic Tag Solder Piece for Pad Repair
₨ 650
Mechanic Magic Tag Pad Repair
The Mechanic Magic Tag solder piece (2nd generation) replaces the flying jumper wire when a solder pad lifts or goes missing on a mobile motherboard. Mechanic builds each pad from industrial-grade PCB copper foil at 30μm and adds fixed pins that anchor it to the board. You solder it onto the damaged spot, check continuity, and fix it with UV-curing solder mask ink. The thin, flat profile lets double-layer boards sit back together without a wire in the way. It suits iPhone and Android board work, BGA pad repair, and mobile phone pad repair at your repair bench.
In stock
Mechanic Magic Tag Solder Piece: Pad-Level Repair Without Flying Wire
The Mechanic Magic Tag solder piece, in its 2nd generation form, gives your repair bench a pad-level fix for a fault that normally costs time and patience: a lifted or missing solder pad. Instead of looping a hair-thin jumper wire from the broken point to the next good trace, you solder a pre-formed copper pad onto the damaged spot and move on. Mechanic builds the pad from industrial-grade printed circuit board copper foil at 30μm thickness and adds a fixed pin that anchors it to the board. Pakistani repair shops handle dead phone cases and hardware fault boards every day, and this switch from flying wire to a flat, board-level pad speeds up how fast you close a job.
Pad Construction and Technical Highlights
Each Magic Tag pad targets the main weakness of traditional jumper work: bulk. A looped wire sits above the board, catches on shields, and stops the next layer from seating flat. The 30μm copper foil pad stays thin enough to avoid that problem. The reinforced fixed pins help the pad resist lifting after you solder it down, and the flat surface helps you avoid false soldering caused by uneven contact. You then fix the pad with UV-curing solder mask ink, the green oil your workshop already uses, so the repaired spot blends back into the original board finish. Supplier documentation lists round, rectangular, and oval pad shapes, which lets you match the pad to the damaged footprint instead of forcing one shape onto every repair.
Where the Mechanic Magic Tag Solder Piece Fits Your Rework Workflow
Start with a clean board. Remove residue and damaged material from the pad area, then place the Magic Tag under your microscope. Heat it with your soldering station or hot air station, flow solder across the joint, and test continuity with a multimeter before you cure the mask. Your PCB holder keeps the board steady during placement, which matters on small pads. The piece works well for BGA pad repair under ICs, CPUs, and NAND chips, and for restoring pads on broken flex connectors or battery terminals. If a pad lifts during reballing, you fix it with the Magic Tag first and then continue with your reballing kit. On double-layer boards, the flat pad lets you recombine the layers directly, with no wire between them. Boards that show a charging issue, display problem, or network issue can trace back to a damaged pad or trace, and this piece gives you a clean way to restore that connection.
Why Technicians Stock It for Mobile Repair in Pakistan
You use this piece in place of jumper lagana on pad faults, so it behaves like a consumable you restock as your repair volume grows. Supplier documentation covers iPhone and Android motherboard repair, and the same pad-level approach applies to other small electronics boards such as tablets and laptops. The pack contains one Magic Tag. Technicians who already work with fine jumper wire and flux can treat this as the upgrade path: the same micro-soldering skill, with a neater and more repeatable result. Pair it with your soldering stations, hot air stations, microscopes, and reballing kits from the Mechanicpk range to cover the full pad-repair workflow.
| Weight | 0.1 kg |
|---|
Key Features
- ✓2nd generation enhanced version of the Mechanic Magic Tag
- ✓Industrial-grade PCB copper foil pad at 30μm thickness
- ✓Fixed pins reinforce the pad against lifting
- ✓Thin, flat profile reduces the risk of false soldering
- ✓Fixes with UV-curing solder mask ink (green oil)
- ✓Replaces jumper wire looping on damaged pads
- ✓Lets double-layer boards recombine without a wire between layers
- ✓Round, rectangular, and oval pad shapes per supplier documentation
Specifications
| Brand | Mechanic |
|---|---|
| Model | Magic Tag (2nd Generation Enhanced Version) |
| Category | Mobile Repair Tools > Jumper and Rework Pads |
| Compatibility | Mobile phone motherboards (iPhone and Android); also suited to other small electronics PCBs such as tablets and laptops |
| Technology | Fixed-pin repair pad with UV-curing solder mask (green oil) fixing |
| Material | Industrial-grade printed circuit board copper foil, 30μm thickness |
Common Repair Uses
- ✓Pad-level repair where a solder pad has lifted, burned, or gone missing
- ✓Replacing flying jumper wire on damaged pads
- ✓BGA pad repair under ICs, CPUs, and NAND chips
- ✓Restoring missing or damaged solder pads
- ✓Repairing broken pads on flex connectors
- ✓Restoring battery terminal pads on a PCB
- ✓Recombining double-layer motherboards after repair
- ✓PCB trace and pad repair during micro-soldering
Compatible Devices
- ✓iPhone and Android mobile motherboards (general pad-repair scope, not model-specific)
- ✓iPhone motherboards
- ✓Android smartphone motherboards
- ✓Double-layer (sandwich) mobile motherboards
- ✓Tablet PCBs
- ✓Laptop motherboards
FAQ
What is the product name?
What is the brand of this product?
What is the model of this product?
What is this product used for?
Which devices are compatible with this product?
Who should use this product?
Does the Magic Tag replace jumper wire on double-layer iPhone boards?
How do you fix the Magic Tag after soldering it?
Related products
ICFRIEND UFS eMMC ISP Adapter for MiPi Tester & F64 Box
In stock
JZQ-599B Soldering Iron Tip Cleaner with Tin Cleaning Ball
Out of stock



