Magma C210 Soldering Iron Tip (Curved) for Mobile Repair

₨ 1,500

C210 Curved Soldering Tip for Mobile Repair

The Magma C210 Soldering Iron Tip (Curved) is an integrated, lead-free cartridge tip for handles built on the C210 interface. The curved shaft lets you reach pads beside shield cans, connectors, and tall components without tilting the handle into neighbouring parts. You get fast heat-up and quick temperature recovery from the integrated heating core, which suits fine SMD work, solder bridge cleanup, and jumper wire joints on dead phone boards. Mechanicpk supplies this C210 curved soldering tip in Pakistan for technicians who solder under a microscope and need a dependable replacement for worn tips.

In stock

10 People watching this product now!
Description

C210 Curved Soldering Tip Built for Fine Board-Level Work

The Magma C210 Soldering Iron Tip (Curved) gives your C210 handle a bent working end for the crowded areas of a mobile phone board. This C210 curved soldering tip belongs to Magma’s lead-free C210 series, which packs the heating core into the replaceable cartridge itself. When the tip wears out, you swap the whole cartridge and keep the same handle and station. If you spend your day on charging issue boards, flex connector pads, and small passive replacements, a reliable fine tip decides how clean each joint turns out, and the curved version gives you a sharper approach angle than a straight pencil tip.

How the Curved Shape Changes Your Access

A straight tip forces you to raise the handle whenever a shield frame, board-to-board connector, or tall capacitor sits beside the pad. The curved tip moves the contact point away from the handle axis, so you keep your wrist low and your line of sight open under the microscope. You reach charging port legs, battery connector pads, and display flex pads from the side without brushing neighbouring parts. The angle also helps when you drag solder across fine-pitch pads, because you watch the contact point instead of hiding it behind the handle. On a dense board, that visibility keeps you from lifting a pad by accident.

Integrated Cartridge Design for Lead-Free Work

Magma builds the C210 series as an integrated cartridge, so the heating core sits right behind the working surface. Supplier information for the series lists fast heat-up, quick temperature recovery, anti-oxidation treatment, and lead-free compatibility. As a C210 soldering iron tip, it tins easily, which keeps heat moving from tip to pad. Lead-free alloy needs more heat than leaded solder, so a tip that recovers quickly between joints keeps your results consistent across a long repair session. Set your station temperature for the alloy you use, and keep the tip tinned whenever it sits idle.

The tip fits handles that use the C210 interface, including the JBC T210 precision handle and handles sold with Sugon, Aifen, Aixun, Kaisi, and Yihua stations. It does not fit C245 or C115 handles, so check the cartridge number on your current tip before you order. A worn or oxidised tip causes cold joints and slow work, which costs you more than a spare cartridge on the bench.

If your workshop runs more than one station brand, a tip that fits the shared C210 interface simplifies your stock. You buy one C210 curved soldering tip and use it across every compatible handle on the bench, instead of tracking a different consumable for each station. That matters for a repair shop with several technicians, because a missing tip stops a repair as completely as a dead iron does. Keep two or three spares on hand for the tips you wear out fastest.

Where It Fits in Your Mobile Repair Workflow

Start the repair with a multimeter check and a visual inspection under your microscope, then decide whether the fault needs a hot air station or a precise iron. Lift shield cans and larger ICs with your hot air station, and keep this tip for the pad-level work that follows: cleaning solder bridges, tinning pads, and refitting small components. As a mobile repair soldering tip, it also handles the fine wire work for ISP pinout tools, where you solder thin jumper wires to test points on a dead phone before an eMMC or UFS read.

Technicians who run reballing kits use the same tip to level and clean pads before a new ball pattern goes on. Clamp the board in a PCB holder so the curved tip meets the pad at a steady angle, and confirm the repair with your test box and multimeter once the joints cool. If you also drag solder or lift small ICs, pair this curved tip with a straight or blade C210 tip so one handle covers the whole bench routine.

Additional information
Weight0.5 kg
Q & A
Please login to post questions

Key Features

  • Curved tip for side access in tight board areas
  • Integrated cartridge with the heating core behind the tip
  • Fast heat-up
  • Quick temperature recovery between joints
  • Anti-oxidation treatment for longer tip life
  • Lead-free compatible
  • Easy tinning for efficient heat transfer
  • Plug-in cartridge swap that keeps your handle and station

Specifications

BrandMagma
ModelC210 (Curved)
CategorySoldering Iron Tips
CompatibilityC210-interface soldering handles, including JBC T210, T26 series, Sugon, Aifen, Aixun, Kaisi, and Yihua
TechnologyIntegrated heating-core cartridge, lead-free compatible
Tip ShapeCurved (bent)

Common Repair Uses

  • Fine-pitch and board-level soldering on mobile phone PCBs
  • SMD component soldering under a microscope
  • Micro soldering next to shield cans and connectors
  • Solder bridge cleanup on fine-pitch pads
  • Charging port and battery connector pad repair
  • Display flex connector pad rework
  • Jumper wire joints on dead phone boards
  • Pad tinning and cleaning before reballing
  • Small passive component replacement

Compatible Devices

  • Universal soldering consumable for C210-interface handles; not tied to specific phone models
  • Handles using the C210 cartridge interface
  • JBC T210 precision handle
  • T26 series soldering handles
  • Sugon soldering station handles
  • Aifen soldering station handles
  • Aixun soldering station handles
  • Kaisi soldering station handles
  • Yihua soldering station handles

FAQ

What is the product name?
The product name is Magma C210 Soldering Iron Tip (Curved).
What is the brand of this product?
The brand of this product is Magma.
What is the model of this product?
The model of this product is C210 (Curved).
What is this product used for?
This product is used for fine SMD soldering, solder bridge cleanup, and pad-level rework on mobile phone boards in tight spaces.
Which devices are compatible with this product?
This product fits soldering handles that use the C210 interface, including JBC T210, T26 series, Sugon, Aifen, Aixun, Kaisi, and Yihua handles. It is not tied to specific phone models.
Who should use this product?
This product is suitable for mobile repair technicians, repair shops, service centers, and professional users.
Will this C210 tip fit a C245 or C115 handle?
No. This tip uses the C210 interface and fits C210-compatible handles only. Check the cartridge number on your current tip before you order.
Can I use this tip with lead-free solder?
Yes. The Magma C210 series is listed as lead-free compatible. Set your station temperature for the alloy you use and keep the tip tinned.