YCS 4W-50g Thermal Paste CPU Cooling Paste Silicone

₨ 1,500

Silicone Thermal Paste for Repair Benches

YCS 4W-50g Thermal Paste CPU Cooling Paste Silicone gives your bench a 50g tub of silicone-based thermal grease rated at 4W/m·K. Technicians use it to restore heat transfer between a processor and its heatsink or shield on phones, laptops and desktop boards. The paste fills the microscopic gaps between mating surfaces, so heat leaves the chip instead of building up behind it. If you handle phones with CPU heating, frequent restarts or game lag, this 4W grade covers routine re-pasting jobs. Mechanicpk supplies it to repair shops and service centers across Pakistan.

In stock

11 People watching this product now!
Description

4W Thermal Paste for Mobile Repair: YCS 4W-50g Overview

A 4W thermal paste for mobile repair earns its place on your bench the moment a processor runs hot and the phone starts restarting under load. YCS 4W-50g Thermal Paste CPU Cooling Paste Silicone packs 50g of silicone-based grease with a 4W/m·K thermal conductivity rating, sized for shops that re-paste boards every week instead of once a year. The paste fills the microscopic gaps between a chip surface and the heatsink, shield or cooler that presses against it, and that thin contact layer decides how quickly heat leaves the silicon. Mechanicpk supplies this YCS grade to technicians, service centers and repair shops across Pakistan who need a dependable general-purpose paste for phones, laptops and desktop CPUs.

Where This Paste Fits in Your Repair Workflow

Thermal paste belongs at the end of a hardware repair, after the soldering or rework finishes and before you close the device. A typical sequence starts with removing the heatsink or shield, scraping off the dried compound, and cleaning the chip face with isopropyl alcohol. You then apply fresh paste, refit the cover and test under load. On laptop boards, you re-paste the CPU and GPU every time you pull the cooler. On phone boards, you use it wherever the repair calls for a thermal compound between the processor and its heat-spreading surface. Pair it with your hot air station and soldering station for the rework stage, and keep a microscope nearby to inspect the chip surface before you apply paste. After a reballing job, fresh paste on the processor helps the reassembled board shed heat the way it should, so the customer does not return with the same hardware fault.

What the 4W Rating Means at the Bench

The 4W figure describes thermal conductivity in W/m·K. A higher number moves heat through the paste layer faster, so a 4W grade outperforms entry-level pastes in the 1–2W range and sits below the 6W and 8.5W grades that YCS sells in the same 50g series. That spacing gives you a clear upgrade path. You keep the 4W tub for routine re-pasting on everyday phones and laptops, and you step up to 6W or 8.5W for machines that run hotter, such as gaming laptops. The tub holds 50g of paste, measures 123 x 39.5 x 40 mm in its pack and weighs 80g gross, so it fits a tool drawer without taking space from your PCB holders, reballing kits or multimeter. One tub covers many jobs because each application needs only a small amount.

Application Notes for Clean, Repeatable Results

Start with a clean surface. Remove every trace of the old compound from the chip and the contact plate, because leftover dried paste blocks the new layer from seating flat. Place a pea-sized amount on the centre of the chip, then spread it into a thin, even film before you secure the heatsink. More paste does not mean better cooling. A thick layer holds heat instead of passing it on, and excess squeezes out toward neighbouring components. Keep paste off connector pads, flex contacts and small SMD parts, and wipe any overflow away with isopropyl alcohol and a lint-free cloth. When a customer brings in a phone that heats up, hangs during games or restarts under load, check the thermal contact before you commit to a costly IC replacement. Fresh paste is a fast, low-cost first step, and it often separates a heat problem from a true board fault. Close the tub after each job and wipe the rim so the next application starts clean. Busy workshops can keep several tubs on hand so every bench has paste within reach, and you can order alongside your other repair consumables from Mechanicpk.

Additional information
Weight0.50 kg
Q & A
Please login to post questions

Key Features

  • 4W/m·K thermal conductivity for steady heat transfer from chip to heatsink
  • Silicone-based grease that fills small gaps between mating surfaces
  • 50g tub that covers many re-pasting jobs per bench
  • Targets CPU heating, frequent restarts and game lag
  • One paste for phone, laptop, notebook and computer processors
  • Part of the YCS series with 6W and 8.5W grades for hotter machines
  • Spreads in a thin film with a pea-sized starting amount
  • Compact pack (123 x 39.5 x 40 mm, 80g gross) that fits a tool drawer

Specifications

BrandYCS
Model4W-50g
CategoryThermal Paste (Repair Consumable)
CompatibilityUniversal, not device-specific; for CPU/processor heat transfer on mobile phones, laptops and computers
Supported DevicesMobile phone, laptop, notebook and computer processors
TechnologyThermal conductivity 4W/m·K
MaterialSilicone-based thermal grease, 50g net content, pink
Dimensions123 x 39.5 x 40 mm (pack)
Weight80g (gross)

Common Repair Uses

  • Heat-related repair and re-pasting jobs
  • Fixing CPU overheating on phones and laptops
  • Reducing frequent restarts caused by heat
  • Cutting game lag and jamming from high processor temperature
  • Re-pasting a laptop CPU after cooler removal
  • Lowering high graphics card temperature
  • Filling small gaps between a chip and its heatsink or shield
  • Refitting a processor cover after reballing or rework
  • Reducing motherboard heat during routine service

Compatible Devices

  • Universal scope, not device-specific; suited to processors on mobile phone, laptop and computer boards
  • Mobile phone CPU/processors
  • iPhone logic boards
  • Android phone processors (universal, not model-specific)
  • Laptop and notebook CPUs
  • Desktop computer CPUs
  • Graphics card GPUs
  • Motherboard chip-to-heatsink contact points
  • Tablet processors

FAQ

What is the product name?
The product name is YCS 4W-50g Thermal Paste CPU Cooling Paste Silicone.
What is the brand of this product?
The brand of this product is YCS.
What is the model of this product?
The model of this product is 4W-50g.
What is this product used for?
This product is used for improving heat transfer between a processor and its heatsink or shield, which helps with CPU heating, frequent restarts and game lag.
Which devices are compatible with this product?
This product is universal and suits processors on mobile phones, laptops, notebooks and computers. It is not limited to specific models.
Who should use this product?
This product is suitable for mobile repair technicians, repair shops, service centers, and professional users.
What thermal conductivity does the YCS 4W-50g thermal paste have?
It has a thermal conductivity rating of 4W/m·K. YCS also sells 6W and 8.5W grades in the same 50g series for machines that run hotter.
How much thermal paste should I apply to a phone or laptop CPU?
Clean off the old paste first, place a pea-sized amount on the chip, spread it into a thin even film, then secure the heatsink. Wipe excess paste away and keep it off connector pads.