YCS 183°35g Soldering Paste Needle-Type for Mobile Repair
₨ 850
183°C Solder Paste for Mobile Repair
YCS 183°35g Soldering Paste Needle-Type gives you a medium-temperature solder paste in a 35g needle syringe, built for mobile phone motherboard soldering. The 183°C melting point sits between the YCS 138°C low-temperature and 199°C high-temperature pastes, so you match the grade to the board and the IC. YCS adds silver particles to improve conductivity and cut false-soldering rework. The needle tip places paste on fine pads without a spatula or a messy scoop. Add this 183°C solder paste for mobile repair to your BGA, IC, CPU and PCB rework kit at Mechanicpk.
In stock
YCS 183°35g Soldering Paste Needle-Type for Medium-Temperature Board Work
YCS 183°35g Soldering Paste Needle-Type delivers a 183°C medium-temperature solder paste in a 35g needle syringe, and it suits the pad-level work you handle on mobile phone motherboards every day. If you want a 183°C solder paste for mobile repair that dispenses from a needle instead of a jar, this syringe format answers that need directly. The 183°C grade sits between the YCS 138°C low-temperature and 199°C high-temperature pastes, so you choose the grade that matches the board, the IC and your hot air profile. Mechanicpk supplies it to technicians, repair shops and service centers across Pakistan who rework BGA, CPU and IC joints on a daily schedule.
Needle-Type Syringe Format and Paste Control
The 35g needle syringe puts paste exactly where the joint needs it. You press a small bead onto a pad row, a lifted trace or a reballing stencil opening, and you stop there. That control matters on dense mobile boards, where one heavy bead bridges neighbouring pads and sends you back for another rework pass. A needle also reaches pads that sit close to shield cans, connectors and tall components, which a spatula or brush often cannot reach cleanly. Cap the needle after every job so the remaining paste stays usable for the next board. Use a steady push instead of a fast squeeze, and clear excess paste with a lint-free wipe before you heat the area. That keeps your bench tidy and your results repeatable.
Silver-Containing Paste and 183°C Melting Point
YCS adds silver particles to this paste to raise conductivity and cut false soldering, the weak joint that looks fine on the surface but fails once the phone runs under load. The 183°C melting point gives you a medium-temperature option for mobile PCB soldering, so you do not need to jump to the 199°C grade for every job. Set your hot air station or preheater near that melting point, watch the paste turn bright and flow, and pull the heat once the joint wets out. Every station reads temperature a little differently, so test your first joint on a scrap board before you commit to a live motherboard. Technicians who keep several YCS grades on the bench match the paste to the component and the board instead of forcing one setting on every repair.
Using 183°C Solder Paste for Mobile Repair on Your Bench
You reach for this paste after you lift a chip and clean the pads. Wick away the old solder, wipe the board with flux cleaner, and lay down a thin layer through the needle. Reflow a BGA, reseat an IC, patch a lifted pad or rebuild a ball set with a stencil, then inspect the result under a microscope before you power the board. Many jobs that arrive as a dead phone, a charging issue, a display problem, a network issue, a boot loop or a hang on logo trace back to a hardware fault at a cracked or cold joint, and fresh paste gives you a reliable way to restore that joint. It also helps in dead after flash cases once you confirm the fault sits at board level. Build a complete bench around it: a hot air station for reflow, a soldering station for touch-up, a reballing kit for BGA work, a PCB holder for stable positioning and a multimeter for continuity checks before power-on. Keep one syringe per workstation so every technician in your shop starts a joint with the same paste and the same technique, which makes results easier to compare when a board comes back. When a repair needs a different melting point, move to the YCS 138°C or 199°C paste.
| Weight | 0.35 kg |
|---|
Key Features
- ✓35g needle-type syringe for controlled paste placement
- ✓183°C medium-temperature melting point
- ✓Silver particles added to raise conductivity
- ✓Reduces false soldering and repeat rework
- ✓Suits BGA, IC, CPU and PCB soldering on mobile boards
- ✓Fits between the YCS 138°C and 199°C paste grades
- ✓Reaches tight pads near shield cans and connectors
- ✓Works with hot air stations, preheaters and reballing kits
Specifications
| Brand | YCS |
|---|---|
| Category | Solder Paste |
| Compatibility | Universal — mobile phone PCB, BGA, CPU and IC soldering (not device-specific) |
| Supported Devices | Mobile phone motherboards |
| Technology | Medium-temperature, silver-containing solder paste |
| Melting Point | 183°C |
| Form | Needle-type syringe |
| Net Quantity | 35g |
Common Repair Uses
- ✓BGA IC reflow on dead phone boards
- ✓CPU and SoC reballing with a stencil
- ✓Replacing charging ICs after a charging issue
- ✓Repairing pads after a display problem or connector damage
- ✓Resoldering network and RF section components
- ✓Fixing cold joints behind boot loop and hang on logo faults
- ✓Patching lifted pads and small trace breaks
- ✓Re-tinning pads after IC removal and cleaning
Compatible Devices
- ✓Universal — works on mobile phone PCB and BGA soldering across brands, not tied to specific models
- ✓Smartphone motherboards from any brand (universal, not device-specific)
- ✓BGA chip pads on mobile logic boards
- ✓CPU and SoC reballing and reflow work
- ✓Memory IC pads (eMMC and similar BGA packages)
- ✓Power management and charging IC pads
- ✓Audio and display driver IC pads
- ✓SMD component pads on mobile PCBs
- ✓Lifted pad and broken trace patch areas
FAQ
What is the product name?
What is the brand of this product?
What is the size of this product?
What is this product used for?
Which devices are compatible with this product?
Who should use this product?
How does the YCS 183°C paste compare to the 138°C and 199°C grades?
Can I use this needle-type paste for BGA and CPU rework on mobile boards?
Related products
ICFRIEND UFS eMMC ISP Adapter for MiPi Tester & F64 Box
In stock
QIANLI 008 Cutting Knife Blade for BGA Underfill Removal
Out of stock
Qianli 011 16-in-1 Glue Removal Knife for Mobile Repair
Out of stock



