YCS Chip Seam Sealing Waterproof Black Adhesive 10CC
₨ 600
YCS Black Chip Seam Sealant
The YCS Chip Seam Sealing Waterproof Black Adhesive 10CC gives your repair bench a black, waterproof, dustproof seal for CPU, IC and screen seams. This chip seam sealant for mobile repair comes as a 10cc (22g) tube with a needle applicator and plunger, so you place the bead exactly where the gap sits. The cured layer stays flexible and resists cracking, which keeps a resealed chip edge clean after reballing or IC replacement. Stock it from Mechanicpk if your workshop finishes board-level jobs and wants a neat, protected result on every phone you return.
In stock
Chip Seam Sealant for Mobile Repair: YCS 10CC Black Adhesive
The YCS Chip Seam Sealing Waterproof Black Adhesive 10CC is a chip seam sealant for mobile repair. It closes gaps around CPUs, ICs and screen edges with a black, flexible, waterproof layer. Technicians who finish board-level work in Pakistan use it as the last step after reballing or IC replacement, because an exposed chip edge lets dust and moisture back into a repaired board. The 10cc (22g) tube ships with a needle applicator and a plunger, so you control bead size without buying a separate dispenser.
How the Seal Protects a Repaired Board
Once cured, the adhesive forms a barrier that keeps water and dust away from sensitive components. The black liquid flows into narrow seams and leaves a seamless finish, so a resealed chip blends with the surrounding board instead of showing a pale or patchy edge. The cured layer stays soft and flexible, so it resists cracking over time. That flexibility matters on a board that flexes slightly with handling, and on a chip you have just reworked and do not want to disturb again. Suppliers position this adhesive for chip repair and precision bonding on chips, CPUs, hard drives and screens. Its black colour suits dark housings and board edges where a clear sealant would show.
Where It Fits in Your Repair Workflow
You reach for this sealant at the end of a PCB repair, not the start. A typical sequence runs like this. You diagnose the fault, whether it is a dead phone, a charging issue or another hardware fault. You remove the chip with your hot air station, then clean the pads under the microscope. You reball or replace the IC with your reballing kit and soldering station, and you hold the board steady in a PCB holder. You confirm the repair with a multimeter and a power-on test. Only then do you seal the chip edge.
Test first. A sealed chip is harder to rework, so a board that still shows a fault should stay unsealed until it passes. When the board works, run the needle along the chip edge and fill the seam. The same adhesive also covers screen seams and other board areas that need extra protection from dust and water. Hard drive components are another use listed by suppliers.
Choosing the 10CC Pack for Your Shop
The 10cc tube suits a busy workshop that seals chips regularly and wants one consistent product on the bench. The needle applicator reaches tight seams around BGA packages, and the plunger helps you push the adhesive out in a controlled bead. Mechanicpk stocks it alongside the tools it works with, so you can build a complete finishing setup in one order. Browse our Reballing Kits, Hot Air Stations, Soldering Stations, Microscopes and PCB Holders pages, and pick up a Multimeter or Test Box for the confirmation step.
The adhesive is universal. It is not tied to one phone brand or chipset family, so one tube serves Samsung, Oppo, Vivo, Infinix, Tecno and iPhone boards alike wherever a seam needs sealing. If your repair volume grows, step up from a single tube to several tubes on each bench so no technician waits for a shared one. The tube works with the rest of your soldering and rework tools. It does not replace any of them.
| Weight | 0.10 kg |
|---|
Key Features
- ✓Black liquid adhesive that fills seams and leaves a seamless finish
- ✓Waterproof barrier once cured
- ✓Dustproof protection for sensitive components
- ✓Flexible and anti-crack after curing
- ✓10cc (22g) tube capacity
- ✓Needle applicator for precise bead placement
- ✓Plunger included in the pack
- ✓Universal use on chips, CPUs, ICs, screens and PCB areas
Specifications
| Brand | YCS |
|---|---|
| Model | Chip Seam 10CC |
| Category | Mobile Repair Adhesives and Sealants |
| Compatibility | Universal, not device-specific |
| Capacity | 10cc (22g) |
| Color | Black |
| Package Contents | 1 x Black Adhesive Tube, 1 x Needle Applicator, 1 x Plunger |
Common Repair Uses
- ✓Sealing and protecting chips, CPUs and seams after board-level repair.
- ✓Resealing a CPU after reballing
- ✓Sealing an IC edge after IC replacement
- ✓Filling chip seam gaps for a clean black finish
- ✓Protecting PCB areas from dust and water
- ✓Closing LCD screen seams
- ✓Strengthening hard drive component seams
- ✓Cosmetic restoration of reworked chips
- ✓Final protection step after a tested hardware fault repair
Compatible Devices
- ✓Universal sealing adhesive. It works on any phone, board or component with a seam to seal, with no device-specific limits.
- ✓Mobile phone CPU packages
- ✓Mobile phone ICs and chips
- ✓Phone logic boards (PCBs) of any brand
- ✓Chips after reballing or IC replacement
- ✓LCD screen seams
- ✓Board areas that need extra dust and water protection
- ✓Hard drive components
- ✓Electronics where a black, seamless finish is wanted
FAQ
What is the product name?
What is the brand of this product?
What is the model of this product?
What is this product used for?
Which devices are compatible with this product?
Who should use this product?
How much adhesive does the YCS 10CC tube hold?
Can I use this adhesive to reseal a CPU or IC after reballing?
Related products
QIANLI 008 Cutting Knife Blade for BGA Underfill Removal
Out of stock



