YCS-SX02 Oxidation Point Quick Repair Paste 30cc
₨ 800
Oxidation Point Quick Repair Paste for PCB Work
The YCS-SX02 Oxidation Point Quick Repair Paste 30cc gives technicians a fast way to tin oxidised pads, test points, and hard-to-wet metal surfaces on mobile phone motherboards. YCS formulates this flux paste to dip tin strongly, skip the nickel transfer step, and leave no residue, so you move from preparation to soldering without a cleaning stage. The odorless, environmentally friendly formula suits busy workshops, and the 30cc container covers oxidation point repair, PCB and BGA rework, DIY welding, and battery welding. Order it from Mechanicpk for your repair bench in Pakistan.
In stock
Oxidation Point Quick Repair Paste for Stubborn PCB Pads
The YCS-SX02 Oxidation Point Quick Repair Paste 30cc gives your bench a dedicated flux paste for the spots where ordinary solder refuses to take. Mobile boards that spent years in humid workshops and pockets, or that suffered liquid contact, carry oxidised pads, test points, and metal surfaces that resist tinning. This oxidation point quick repair paste from YCS targets exactly that problem. The manufacturer positions it as a strong tin-dipping paste with fast welding action. The 30cc size suits a shop that treats oxidised boards every week rather than once in a while, because one container lasts through many small repairs.
Key Technical Highlights
YCS publishes a focused feature set for the YCS-SX02, and each point maps to a real bench task. The paste dips tin strongly, so solder wets surfaces that normally bead up and roll away from the iron tip. The manufacturer states that you do not need to transfer nickel first, which removes a preparation step on metals that usually demand it. The paste also works on a variety of metals that tin does not stain easily, so you can use it beyond standard board pads. After soldering, the paste leaves no residue, needs no cleaning, and does not corrode the joint area, according to the product data. The formula is odorless and environmentally friendly, which matters in a small workshop where several technicians share one room.
Where It Fits in Your Repair Workflow
Place this paste at the pre-soldering stage of PCB repair and BGA rework. When you spot a dull, oxidised pad or test point during hardware fault diagnosis, you clean the surface, apply a thin layer of YCS-SX02, and tin it with your iron or hot air station. A tinned pad accepts a jumper wire, a replacement component, or a reballed IC far more reliably than a bare oxidised pad. That sequence matters on dead phone boards, charging issue boards, and display problem boards where oxidation breaks the contact. Pair the paste with a soldering station from our Soldering Stations category and inspect pad condition under a microscope before and after tinning. If you rework BGA parts, keep your reballing kits and PCB holders within reach so the board stays steady while you work. Confirm continuity with a multimeter once the joint cools, then move on to the next fault.
Why Technicians and Shop Owners Choose It
The manufacturer names three uses for the YCS-SX02: oxidation point repair, DIY welding, and battery welding. That range lets one 30cc container cover board-level work and general soldering jobs on the same bench. Because the paste leaves no residue and needs no cleaning, you skip the isopropyl wipe-down and finish each repair faster. Shop owners in Pakistan get a consumable that fits the same buying cycle as flux, solder wire, and desoldering wick, and you can add it to one order alongside hot air stations, multimeters, and test boxes from Mechanicpk. Test your technique on a scrap board first, because every paste behaves differently with your iron temperature, tip size, and board metal.
| Weight | 0.18 kg |
|---|
Key Features
- ✓Strong tin-dipping action on oxidised surfaces
- ✓No nickel transfer step needed, per the manufacturer
- ✓Fast welding response
- ✓Works on a variety of metals not easily stained by tin
- ✓Leaves no residue
- ✓No cleaning required after soldering
- ✓No corrosion, per the manufacturer
- ✓Odorless, environmentally friendly formula in a 30cc container
Specifications
| Brand | YCS |
|---|---|
| Model | YCS-SX02 |
| Category | Flux Paste / Soldering Paste |
| Compatibility | Universal, not device-specific |
| Capacity | 30cc |
| Package Contents | 1 x Soldering Paste |
Common Repair Uses
- ✓Scenarios drawn from the manufacturer’s stated uses and the paste’s evident function.
- ✓Oxidation point repair on corroded pads
- ✓Tinning oxidised test points before jumper work
- ✓PCB repair on boards with stubborn, non-wetting surfaces
- ✓BGA area preparation before reballing or IC reinstall
- ✓Battery welding
- ✓DIY welding jobs
- ✓Pad preparation after liquid damage cleaning
- ✓Repairs where you want no residue and no cleaning step
Compatible Devices
- ✓Universal repair consumable. The manufacturer does not list device-specific support, so it applies to any metal surface or PCB pad that needs tinning.
- ✓Mobile phone motherboards (universal, not device-specific)
- ✓Oxidised PCB pads and test points
- ✓BGA pad areas on logic boards
- ✓Tablet PCBs
- ✓Laptop and general electronics boards
- ✓Metal surfaces that tin does not stain easily
- ✓Battery contact tabs and terminals
- ✓DIY soldering projects
FAQ
What is the product name?
What is the brand of this product?
What is the model of this product?
What is this product used for?
Which devices are compatible with this product?
Who should use this product?
Do you need to transfer nickel before soldering with the YCS-SX02?
Does the YCS-SX02 leave residue that you must clean after soldering?
Related products
Qianli 011 16-in-1 Glue Removal Knife for Mobile Repair
Out of stock



