YCS 150°C 35g Needle-Type Solder Paste

₨ 750

YCS 150°C Needle-Type Solder Paste

YCS 150°C solder paste gives mobile repair technicians a low-temperature option for BGA, SMD, and motherboard PCB soldering. The 35g needle-type syringe lets you place a controlled bead on each pad, which cuts bridging and paste waste on small footprints. A 150℃ melting point lowers the heat your hot air station needs, so nearby ICs and flex pads face less thermal stress. YCS adds silver particles to improve conductivity and reduce false soldering rework. Order it from Mechanicpk for your Pakistan repair shop, and pair it with reballing kits, hot air stations, and soldering stations.

In stock

16 People watching this product now!
Description

YCS 150°C Solder Paste for Low-Heat Motherboard Rework

YCS 150°C solder paste comes in a 35g needle-type syringe made for technicians who rework mobile motherboards at lower temperatures. The 150℃ melting point opens a gentler thermal window than 183℃ or 199℃ paste, which matters when a board carries heat-sensitive ICs, flex connector pads, or a multilayer stack. You press the plunger, lay a measured bead on the pad, and reflow it with your hot air station. The paste serves BGA, SMD, and PCB soldering on phone and tablet logic boards, so it belongs on any bench that handles hardware fault jobs every day. Mechanicpk stocks it for Pakistani repair shops that want controlled, repeatable low-heat results.

Why a 150°C Melting Point Protects the Board

Every degree you push through a mobile board reaches the components around your target chip. Plastic connectors, flex pads, and neighbouring ICs absorb that heat whether you want them to or not. Paste that melts at 150℃ lets you run your hot air station at a lower setpoint than a 183℃ or 199℃ paste demands, so you cut thermal stress on the surrounding area. That margin helps most on dense logic boards where charging, display, and power components sit millimetres apart. You still set the temperature profile yourself, based on the board, the package, and your station’s airflow, because no paste replaces good heat control. Start with the lowest setpoint that flows the paste fully, then step up only if the joint needs it. Technicians who fix charging issue and display problem boards often rework chips beside delicate parts, and a lower-melting paste gives them more room to work safely.

Needle-Type Dispensing for Small Pads

The needle tube replaces the spatula-and-jar routine. You squeeze out only the amount each pad needs, which keeps bridges off fine-pitch footprints and wastes less paste per job. The 35g syringe gives you a precise way to feed SMD pads, BGA footprints, and small connector points without scraping paste across the board. YCS adds silver particles to this formula to raise conductivity and cut down the false soldering that forces a second rework. The formulation also targets high density and strong welding force, so a correctly reflowed joint grips the pad firmly. Place the bead under your microscope, check its size against the pad, and trim any excess with the needle tip before you apply heat.

Where It Fits on Your Repair Bench

This low temperature solder paste for mobile repair slots into the reflow and reballing stage of board-level work. After you lift a chip, clean the pads with your soldering station and flux, then inspect them under the microscope. Apply the paste, seat the component, and reflow with the hot air station while a PCB holder keeps the board steady. Finish with a multimeter continuity check before you power the board. Reballing kits pair naturally with this paste when you re-seat a BGA package, and the same routine covers IC change karna jobs on phone and tablet boards.

Workshops that already run ISP pinout tools, eMMC programmers, UFS adapters, and test boxes for software and dead phone diagnosis often hit a point where the fault turns out to be a cold joint or a lifted pad. A syringe of low-temperature paste within reach turns that diagnosis into a same-day fix. If your bench still lacks a stable hot air station or a good microscope, upgrade those first, because even the best paste performs only as well as the heat and magnification behind it.

Additional information
Weight0.10 kg
Q & A
Please login to post questions

Key Features

  • 150℃ melting point for low-heat reflow
  • 35g needle-type syringe for controlled dispensing
  • Silver particles added to improve conductivity
  • Reduces false soldering and repeat rework
  • High-density paste formulation
  • Strong welding force on reflowed joints
  • Made for mobile phone motherboard PCB, BGA, and SMD chip soldering
  • Suits heat-sensitive ICs, flex cables, and multilayer logic boards

Specifications

BrandYCS
ModelYCS 150℃ Needle Tube Solder Paste 35g
CategorySolder Paste
CompatibilityMobile phone motherboard PCB, BGA, and SMD chip soldering
TechnologyLow-temperature solder paste, 150℃ melting point, silver particles added for conductivity
Weight35g

Common Repair Uses

  • Board-level soldering and rework where a lower reflow temperature protects nearby parts.
  • BGA chip reflow and re-seating
  • SMD chip soldering
  • IC change karna on mobile motherboards
  • Fixing false soldering and cold joints
  • Flex cable and connector pad soldering
  • Motherboard PCB repair after a hardware fault
  • Low-heat rework beside heat-sensitive ICs
  • Tablet and iPad logic board rework

Compatible Devices

  • Universal, not device-specific. Suits mobile phone, tablet, and PCB-level soldering across brands.
  • Mobile phone motherboards
  • iPad and tablet logic boards
  • Multilayer mobile logic boards
  • General PCB boards
  • BGA packages
  • SMD components and chips
  • PGA packages
  • Heat-sensitive ICs and flex cable pads

FAQ

What is the product name?
The product name is YCS 150°C 35g Needle-Type Solder Paste.
What is the brand of this product?
The brand of this product is YCS.
What is the model of this product?
The model of this product is YCS 150℃ Needle Tube Solder Paste 35g.
What is this product used for?
This product is used for soldering mobile phone motherboard PCBs, BGA packages, and SMD chips with a low-temperature paste.
Which devices are compatible with this product?
This product is universal and not device-specific. It suits mobile phone motherboards, tablet logic boards, and general PCB, BGA, and SMD soldering.
Who should use this product?
This product is suitable for mobile repair technicians, repair shops, service centers, and professional users.
Can I use YCS 150°C solder paste for BGA chip rework on mobile boards?
Yes. YCS lists this paste for mobile phone motherboard PCB, BGA, and SMD chip soldering repair. Apply a small bead with the needle tip, seat the component, and reflow with your hot air station.
What is the difference between YCS 150°C, 183°C, and 199°C solder paste?
YCS sells the same 35g needle-tube paste in 150℃, 183℃, and 199℃ options. The number marks the melting point, so the 150℃ version melts lowest and suits work near heat-sensitive components.