RELIFE TX1 Sliding Screw Extraction Drill Bit Set
₨ 800
Stripped Screw Extractor Set for Phone Repair
The RELIFE TX1 Sliding Screw Extraction Drill Bit Set gives your repair bench a two-bit answer to damaged phone screws. You get a mini drill bit that opens a rounded screw head and a sliding-thread extraction bit that grips the opened head and backs the screw out, so you open the handset without scarring the frame. Steel construction and a 2.35 mm shank diameter suit small bottom screws and other tight-access positions. Mechanicpk supplies this stripped screw extractor for mobile repair to Pakistani technicians who handle battery, charging port, and display jobs every day.
In stock
Stripped Screw Extractor for Mobile Repair: RELIFE TX1 Sliding Design
A stripped screw extractor for mobile repair saves the job the moment a rounded bottom screw blocks you from opening a handset. The RELIFE TX1 Sliding Screw Extraction Drill Bit Set gives you a matched pair of steel bits: a mini drill bit that opens the damaged screw head and a sliding-thread extraction bit that grips the screw and backs it out. RELIFE built the pair for small phone screws, so you keep the frame, the screw seat, and the board underneath intact. Mechanicpk supplies the TX1 set to Pakistani repair shops that handle daily volume and cannot afford a ruined housing on a simple battery or charging port job.
Technical Profile of the RELIFE TX1 Bit Pair
The set contains two bits: one mini screw drill bit and one stripped screw extraction bit. Both use steel construction, and the shank measures 2.35 mm, which sets the chuck size you need on your driver or grinding pen. The sliding-thread extraction bit separates this design from a plain slotted remover. Its thread profile bites into the opened head instead of relying on a flat edge that slips on rounded metal. Distributor listings describe the set as precision bits for tight spaces and small screw heads, which matches the bottom-screw positions where a stripped head causes the most trouble. You attach the bit to your driver or drill, apply controlled pressure, and the extraction bit grips the damaged head. Keep your speed low and your hand steady, because small steel screws heat up and shear when you force them.
Where the TX1 Fits in Your Repair Workflow
Stripped screws appear at the very first step of a repair, so the TX1 sits at the start of your workflow, before any board-level work begins. A rounded bottom screw stops battery replacement, display problem repairs, and charging issue jobs cold. Once the screw is out, you continue with the normal sequence: open the device, disconnect the battery, and move on to the real fault. When that fault turns out to be a hardware fault on the board, your bench shifts to Soldering Stations, Hot Air Stations, Reballing Kits, and PCB Holders, with Multimeters for diagnosis and Test Boxes for post-repair checks. Software jobs follow the same pattern. A dead phone that needs ISP Pinout Tools, eMMC Programmers, or UFS Adapters still has to come apart first, and the TX1 clears that mechanical barrier so those tools can do their work.
Why Technicians Choose a Dedicated Extraction Set
Improvised removal wastes time and money. Pliers, a chisel, or a cheap blade slip off a rounded head and scar the frame, and a scarred frame means an unhappy customer and a free repair. A purpose-built pair gives you a repeatable two-step method: open the head, then extract the screw. A microscope lets you inspect how deep the damage runs before you drill, and a firm hold on the phone keeps the bit centered. The set is compact, stores in your tool tray beside your screwdriver kits, and reaches your hand fast when a customer’s phone arrives with a chewed-up screw. For shop owners across Karachi, Lahore, and Islamabad, one RELIFE TX1 screw extraction drill bit set per bench removes a common cause of delays and keeps technicians on billable work.
| Weight | 0.3 kg |
|---|
Key Features
- ✓Two-bit pair: mini drill bit plus stripped screw extraction bit
- ✓Sliding-thread extraction bit grips the opened screw head
- ✓Mini drill bit opens rounded heads without a separate tool
- ✓Steel construction for repeated bench use
- ✓2.35 mm shank diameter
- ✓Designed for small screws in tight-access positions
- ✓Compact set that stores easily in your tool tray
- ✓Works with a driver or drill under controlled pressure
Specifications
| Brand | RELIFE |
|---|---|
| Model | TX1 |
| Category | Mobile Repair Tools – Stripped Screw Extraction Bits |
| Compatibility | Mobile phone screws with damaged heads – not model-specific |
| Supported Devices | Mobile phones, including iPhone bottom screws, and small electronics |
| Material | Steel |
| Handle Diameter | 2.35 mm |
| Package Contents | 1 x mini screw drill bit, 1 x stripped screw extraction bit |
Common Repair Uses
- ✓Opening phones blocked by damaged screws during routine repair work.
- ✓Removing stripped bottom screws before battery replacement
- ✓Opening a phone for display replacement
- ✓Accessing the charging port for a charging issue repair
- ✓Opening a water-damaged phone for board cleaning
- ✓Releasing screws on the back housing or frame
- ✓Clearing small screws in tight positions
- ✓Clearing the mechanical barrier before board-level repair
- ✓Removing damaged screws during refurbishing work
Compatible Devices
- ✓Universal – not device-specific. Scope covers phones and small electronics with stripped or damaged small screws.
- ✓iPhone bottom screws with damaged heads
- ✓Android handsets with rounded or stripped small screws
- ✓Small screws in tight-access positions
- ✓Phones that need opening for battery replacement
- ✓Phones that need opening for display replacement
- ✓Small electronics beyond phones with stripped screws
FAQ
What is the product name?
What is the brand of this product?
What is the model of this product?
What is this product used for?
Which devices are compatible with this product?
Who should use this product?
What shank diameter does the RELIFE TX1 use?
How do you remove a stripped phone screw with the RELIFE TX1?
Related products
QIANLI 008 Cutting Knife Blade for BGA Underfill Removal
Out of stock
RELIFE RL-004SA silicone pad – Anti-slip
In stock
UFI eMMC BGA Soldering Adapter (8 Footprints) for UFI-Box
In stock



