2UUL SA15P Screen Sealing Adhesive for iP15 Pro (5pcsPack)

₨ 900

Pre-Cut iPhone 15 Pro Display Seal

The 2UUL SA15P Screen Sealing Adhesive for iP15 Pro (5pcsPack) is a pre-cut, double-sided iPhone 15 Pro screen sealing adhesive for technicians who replace displays every day. Each piece measures 145 x 70 x 0.5 mm, so you place it on the frame without trimming. The pack holds five pieces, enough for five display jobs. You clean the frame, check it for deformation, apply the film, and press it with heat to restore a sealed bezel and a firm display bond. Mechanicpk supplies the SA15P to Pakistani repair shops and service centers that want a repeatable finish on every iPhone 15 Pro screen replacement.

In stock

18 People watching this product now!
Description

Pre-Cut Display Seal Built for the iPhone 15 Pro Frame

The 2UUL SA15P Screen Sealing Adhesive for iP15 Pro (5pcsPack) gives your bench a pre-cut, double-sided iPhone 15 Pro screen sealing adhesive that re-bonds the display assembly to the frame after a screen replacement. Each pack holds five pieces, so one order covers five complete display jobs. 2UUL cuts every piece to 145 x 70 x 0.5 mm, which removes trimming and templating from the final step. The SA15P targets the iPhone 15 Pro, so it follows the frame of that model instead of forcing a universal tape to fit. Mechanicpk stocks it for repair shops that handle iPhone 15 Pro display problems every week and want a consistent, repeatable seal.

Technical Profile of the SA15P Pack

The SA15P belongs to the 2UUL SA series of pre-cut, double-sided screen sealing adhesives for iPhone 12 through 17 models, and this variant matches the iPhone 15 Pro frame. The film measures 0.5 mm thick, so it adds a thin, controlled bond line between the display and the frame. Distributor listings for the series describe a heat-press sealing film that restores airtightness at the screen bezel, and they name heat pressing as the intended application method. Five loose pieces arrive in a flat pack that measures 260 x 104 x 3.5 mm, which fits a parts drawer or a tool tray without bending the film. The adhesive covers front-screen frame work only. It does not replace back glass adhesive, and it does not fit other iPhone sizes. Check the model code on the pack before you open it, because each iPhone model in the SA series carries its own part code. Keep the liner on each piece until the moment you place it, and store the unused pieces flat.

iPhone 15 Pro Screen Sealing Adhesive in Your Repair Workflow

Resealing is the last mechanical step of a front-screen job, and it decides whether the repair lasts. You separate the old display with heat from a hot air station or a heating plate, clear the old adhesive from the frame, and inspect the frame edge for deformation under a microscope. The 2UUL instructions for this series start with the same inspection: clean the frame, check it for deformation, then apply the tape to the frame. Straighten any bent edge first, because a pre-cut film cannot close a gap that the frame itself creates. After you place the film, press it with heat. A hot press or another heated press spreads the bond evenly across the whole perimeter. Power the phone on and test touch and display response before you seal it, then power it down and finish the press. If the phone shows a dead phone symptom or a display problem after reassembly, recheck connector seating before you press, because a pressed film makes reopening costly. A PCB holder or repair fixture keeps the frame steady while you place the film into the corners. The same sequence applies whichever way you separate the screen: clean, inspect, place, press.

Why Repair Shops Stock the 2UUL SA15P

Service centers in Pakistan repeat the same iPhone 15 Pro screen job often, and a five-piece pack keeps one correct-fit film on the shelf for each job. The pre-cut shape removes hand cutting, so a junior technician and a senior technician produce the same seal. Shops that run Pro-model screen repairs usually stock a hot air station, a microscope, and a multimeter beside the adhesive, so one order fits naturally into a wider tool purchase. Stock the full SA series by model code and your counter staff can pull the right film in seconds during a busy day. Buy extra packs if you reseal after frame straightening, because a second attempt on the same frame needs a fresh film. Buyers searching for an iPhone 15 Pro screen sealing adhesive usually want a fitted part, not a roll, and the SA15P answers that with five ready pieces. Match the part code to the phone in front of you, and the SA15P handles the rest.

Additional information
Weight0.100 kg
Q & A
Please login to post questions

Key Features

  • Pre-cut for the iPhone 15 Pro frame, no trimming needed
  • Double-sided adhesive film for display-to-frame bonding
  • 145 x 70 x 0.5 mm thin profile per piece
  • Five pieces per pack for multiple repairs
  • Heat-press application for an even seal across the perimeter
  • Helps restore dust and moisture resistance at the screen bezel
  • Part of the 2UUL SA series, with a model-specific code for each iPhone
  • Flat 260 x 104 x 3.5 mm packaging for easy drawer storage

Specifications

Brand2UUL
ModelSA15P
CategoryiPhone Screen Sealing Adhesive
CompatibilityiPhone 15 Pro
Supported DevicesiPhone 15 Pro
TechnologyPre-cut double-sided adhesive, heat-press application
Dimensions145 x 70 x 0.5 mm per piece
Packaging Dimensions260 x 104 x 3.5 mm
Quantity5 pieces per pack

Common Repair Uses

  • Resealing the front screen after an iPhone 15 Pro display replacement
  • Re-bonding a refurbished display to a cleaned frame
  • Restoring the dust and moisture barrier at the screen bezel
  • Finishing a screen swap after frame straightening
  • Heat-press sealing with a hot press or heated press
  • Display problem repairs where the screen needs a fresh seal after reassembly
  • Batch screen jobs at a service center using one five-piece pack
  • Resealing after a touch or display test passes

Compatible Devices

  • Verified scope is the iPhone 15 Pro front-screen frame only
  • iPhone 15 Pro (model numbers A2848, A3101, A3102, A3104)
  • Front display assembly to frame bonding on the iPhone 15 Pro
  • Not for iPhone 15, 15 Plus, or 15 Pro Max (each model uses its own SA-series part code)
  • Not for back glass or back cover sealing (separate 2UUL BA series)

FAQ

What is the product name?
The product name is 2UUL SA15P Screen Sealing Adhesive for iP15 Pro (5pcsPack).
What is the brand of this product?
The brand of this product is 2UUL.
What is the model of this product?
The model of this product is SA15P.
What is this product used for?
This product seals and re-bonds the front screen of an iPhone 15 Pro to its frame after a display replacement.
Which devices are compatible with this product?
This product fits the iPhone 15 Pro.
Who should use this product?
This product suits mobile repair technicians, repair shops, service centers, and professional users.
Does the 2UUL SA15P fit the iPhone 15 Pro Max or the iPhone 15?
No. The SA15P targets the iPhone 15 Pro only, and each iPhone model in the 2UUL SA series has its own part code, so pick the code that matches the phone.
How do you apply the 2UUL SA15P screen sealing adhesive?
Clean the iPhone frame and check it for deformation, apply the adhesive to the frame, then press it with heat using a hot press or another heated press.