2UUL BA14PS Back Cover Sealing Adhesive for iP14 Plus

₨ 900

iPhone 14 Plus Back Cover Seal Pack

The 2UUL BA14PS Back Cover Sealing Adhesive for iP14 Plus(5pcs/Pack) gives your bench five pre-cut, double-sided seals made for the iPhone 14 Plus rear glass and frame. Each piece replaces the factory adhesive you destroy when you open the back for a battery change, charging issue repair, speaker job, or back glass replacement. You clean the frame, lay the tape, and bond it with a heated press to restore the airtight seal. The BA14PS code targets the iPhone 14 Plus only, so you match the part to the phone before you start. Mechanicpk supplies this iPhone 14 Plus back cover sealing adhesive to technicians and repair shops across Pakistan.

In stock

10 People watching this product now!
Description

iPhone 14 Plus Back Cover Sealing Adhesive for Clean Rear Glass Resealing

The 2UUL BA14PS Back Cover Sealing Adhesive for iP14 Plus(5pcs/Pack) is a model-specific iPhone 14 Plus back cover sealing adhesive that gives technicians a pre-cut, double-sided seal for the rear glass and frame. Every job that opens the back of an iPhone 14 Plus destroys the factory adhesive ring. You remove it to reach the battery, the charging port assembly, or the logic board, and you need a fresh seal before you close the phone. This pack supplies five pre-cut pieces, so you finish five reseals without trimming tape by hand or guessing at the outline.

Pre-Cut Back Glass Adhesive for iPhone 14 Plus: Fit and Pack Details

2UUL cuts each piece for the iPhone 14 Plus rear frame, so the outline follows the bonding surface instead of a generic strip. The supplier lists the piece at 145 x 70 x 0.5 mm, a thin profile for a double-sided gasket. The pack holds five pieces, which suits a bench that handles several iPhone 14 Plus rear glass jobs every week. The BA14PS code marks the iPhone 14 Plus version inside the 2UUL BA series, which also covers other iPhone 14 to iPhone 17 models. Each BA code targets one model, so order the code that matches the phone on your bench. A wrong-model piece costs you the same time as no piece at all.

Where the Adhesive Fits in Your Repair Workflow

The seal goes on last in a back glass workflow. You separate the glass, finish the repair, clean the frame, and check it for deformation. Then you lay the 2UUL tape onto the frame and bond it under heat and pressure. 2UUL points to a heating press such as its DA07 Mini Hot Press Station for that final bond, which restores the airtight seal on the frame. Before you seal, power the phone on and test the repair. Use a multimeter to confirm the battery connector and charging line when the job started as a charging issue or hardware fault. Hold the board in PCB holders during board work, and check solder joints under a microscope. A hot air station from the Hot Air Stations range handles the heat side of component work, and this adhesive closes the job afterward.

Why Shops Stock It Beside Their Back Glass Parts

A repair shop in Pakistan that replaces iPhone 14 Plus back glass, swaps batteries, or clears display problem and charging faults opens the rear panel again and again. Keeping a dedicated model pack on the shelf removes the delay of cutting generic tape and keeps your turnaround steady. You can pair it with its screen-side counterpart, the 2UUL SA14PS Screen Sealing Adhesive for iPhone 14 Plus, so the front and the back of the same phone both get a fresh seal. Technicians who also stock soldering stations, reballing kits, and test boxes get a complete iPhone 14 Plus workflow from one catalog. Mechanicpk lists the 2UUL BA14PS in the mobile repair accessories range for professional benches, service centers, and training workshops.

Additional information
Weight0.100 kg
Q & A
Please login to post questions

Key Features

  • Pre-cut double-sided sealing adhesive for the iPhone 14 Plus back cover
  • Model-specific BA14PS code for the iPhone 14 Plus
  • Five pieces per pack for multiple repairs
  • Listed piece size of 145 x 70 x 0.5 mm
  • Part of the 2UUL BA series, which covers iPhone 14 to iPhone 17 models
  • Bonds under a heating press such as the 2UUL DA07 Mini Hot Press Station
  • Designed to restore the airtight seal on the iPhone frame
  • Suits technicians, repair shops, and service centers

Specifications

Brand2UUL
ModelBA14PS
CategoryMobile Repair Accessories – Back Cover Adhesive
CompatibilityApple iPhone 14 Plus
TechnologyPre-cut double-sided sealing adhesive
Dimensions145 x 70 x 0.5 mm
Pack Quantity5 pcs per pack

Common Repair Uses

  • Resealing the rear glass of an iPhone 14 Plus after the back opens
  • Back glass replacement on the iPhone 14 Plus
  • Resealing the back cover after a battery replacement
  • Closing the phone after a charging issue repair
  • Resealing after speaker or internal module work
  • Closing the back after logic board and hardware fault repair
  • Bonding the adhesive with a heated press to restore the airtight seal

Compatible Devices

  • Apple iPhone 14 Plus (model-specific part)
  • Apple iPhone 14 Plus back cover / rear glass resealing
  • Model-specific BA14PS code: sized for the iPhone 14 Plus only
  • Other iPhone models need their own 2UUL BA-series code

FAQ

What is the product name?
The product name is 2UUL BA14PS Back Cover Sealing Adhesive for iP14 Plus(5pcs/Pack).
What is the brand of this product?
The brand of this product is 2UUL.
What is the model of this product?
The model of this product is BA14PS.
What is this product used for?
This product reseals the back cover of an iPhone 14 Plus after a repair opens the rear glass.
Which devices are compatible with this product?
This product is compatible with the Apple iPhone 14 Plus.
Who should use this product?
This product is suitable for mobile repair technicians, repair shops, service centers, and professional users.
Can I use the 2UUL BA14PS on other iPhone models?
No. The BA14PS code targets the iPhone 14 Plus. 2UUL sells other BA-series codes for the iPhone 14 to iPhone 17 range, so order the code that matches the phone.
Do I need a heat press to apply this back cover adhesive?
2UUL recommends bonding the tape with a heating pressure press, such as its DA07 Mini Hot Press Station. Clean and inspect the frame first, lay the tape on the frame, then press it under heat to restore the seal.