2UUL SA16PM Screen Sealing Adhesive iPhone 16 Pro Max 5Pcs

₨ 900

iPhone 16 Pro Max Screen Sealing Adhesive

The 2UUL SA16PM is a pre-cut, double-sided iPhone 16 Pro Max screen sealing adhesive that restores the seal between the display and the frame after a screen replacement. Each pack holds five gaskets, so you cover five display refits without cutting tape by hand. The high-strength bond holds the screen in place, and heat pressing restores the frame’s airtightness. Pair it with the 2UUL DA07 Mini Hot Press Station or any heating pressure press. Mechanicpk stocks the SA16PM for Pakistani repair shops, service centers, and technicians who handle iPhone 16 Pro Max display work every week.

In stock

10 People watching this product now!
Description

iPhone 16 Pro Max Screen Sealing Adhesive for Display Refits

The 2UUL SA16PM is an iPhone 16 Pro Max screen sealing adhesive cut to fit the phone’s display frame. One pack gives you five pre-cut, double-sided gaskets, so you bond a replacement display or refit an original one without trimming tape by hand. When you open an iPhone 16 Pro Max for a screen change, the factory seal between display and frame breaks, and the airtightness that protects the board goes with it. This adhesive rebuilds that seal through heat pressing, and it belongs on every bench that takes 16 Pro Max screen jobs.

Pre-Cut Fit Built Around the 16 Pro Max Frame

2UUL designs the SA series as dedicated, model-specific gaskets, and the SA16PM targets the iPhone 16 Pro Max. The pre-cut shape follows the frame, so you place the tape once and move on to the bond. The double-sided, high-strength adhesive holds the screen firmly in the frame over long daily use. Hand-cut tape drifts, bridges gaps, and leaves weak spots. A pre-cut gasket removes that variable from your workflow and keeps results consistent across five repairs in a row.

Frame Prep and Heat-Press Workflow

Preparation decides how well the seal holds. Clean the frame, inspect the edge for leftover adhesive or debris, and apply the 2UUL tape to the iPhone frame. Then press the assembly with heat and pressure. 2UUL recommends its DA07 Mini Hot Press Station, and any heating pressure press does the same job. Heat pressing activates the bond and presses the display flat against the frame, which restores the airtightness that a plain finger press cannot. A microscope helps you check the frame edge before you apply the tape, and a hot air station handles the display separation that comes first.

Where It Fits on Your Repair Bench

Screen replacement is the most common iPhone 16 Pro Max job in a Pakistani repair shop. A cracked display, a display problem after a drop, a no-touch fault, or a line on the screen all end with a display refit. The seal you rebuild in that last step decides whether the repair lasts. You buy the SA16PM as a consumable: five gaskets, five finished jobs, no waste on a part that does not fit.

This adhesive sits at the entry point of a sealing workflow. If you start with manual pressing, you can move up to a mini hot press station as your volume grows, and your tape stays the same. Board-level repairs on the same phone call for soldering stations, multimeters, PCB holders, and reballing kits, and you can stock those next to the adhesive so one order covers the whole bench. Shops that run a steady flow of iPhone 16 series screens keep several packs in the drawer, because a missing gasket stops a finished repair at the last step.

Additional information
Weight0.100 kg
Q & A
Please login to post questions

Key Features

  • Pre-cut for the iPhone 16 Pro Max, so no hand trimming
  • Double-sided high-strength adhesive for a long-lasting screen bond
  • Heat-press bonding restores the frame’s airtightness
  • Five gaskets per pack, one per display refit
  • Works with the 2UUL DA07 Mini Hot Press Station or another heating pressure press
  • Simple preparation: clean and inspect the frame, apply the tape, press

Specifications

Brand2UUL
ModelSA16PM
CategoryRepair Tools / Screen Sealing Adhesive
CompatibilityiPhone 16 Pro Max
TechnologyPre-cut double-sided adhesive, heat-press sealing
Pack Quantity5 pcs per pack

Common Repair Uses

  • Display refit and frame resealing on the iPhone 16 Pro Max
  • Screen replacement after a cracked display
  • Display refit after an original screen repair
  • Frame resealing after a display separation
  • Restoring airtightness with a heat press such as the 2UUL DA07 Mini Hot Press Station
  • Screen change in a shop with a high iPhone repair volume

Compatible Devices

  • iPhone 16 Pro Max only (model-specific adhesive)
  • Apple iPhone 16 Pro Max

FAQ

What is the product name?
The product name is 2UUL SA16PM Screen Sealing Adhesive for iPhone 16 Pro Max (5pcs/Pack).
What is the brand of this product?
The brand of this product is 2UUL.
What is the model of this product?
The model of this product is SA16PM.
What is this product used for?
This product is used for sealing and bonding the display to the frame during an iPhone 16 Pro Max screen replacement or refit.
Which devices are compatible with this product?
This product is compatible with the Apple iPhone 16 Pro Max.
Who should use this product?
This product is suitable for mobile repair technicians, repair shops, service centers, and professional users.
How do you apply the 2UUL SA16PM adhesive to an iPhone 16 Pro Max frame?
Clean and inspect the frame, apply the 2UUL screen sealing tape to the frame, then press the assembly with heat and pressure using the 2UUL DA07 Mini Hot Press Station or another heating pressure press.
Do you need a heat press to use the SA16PM screen sealing adhesive?
The heat-press step restores the frame’s airtightness, so a heating pressure press such as the 2UUL DA07 Mini Hot Press Station gives the correct result.