KATEX T7000 Black Glue 110ml for Mobile Screen Repair
₨ 1
T7000 Black Glue for Phone Repair
KATEX T7000 black glue 110ml gives repair shops a flexible black adhesive for the joints that hold a phone together. You use it to bond a replacement display to its frame, reseat a loose bezel, or fix a lifted back cover. Black cures blend into dark housings, so the seam stays clean after the repair. The 110ml bottle covers heavy daily screen work better than small tubes. The surface dries in about three minutes and the bond fully cures in 24 to 48 hours. Mechanicpk supplies it for technicians and service centers across Pakistan who need a dependable mobile screen frame adhesive.
Out of stock
T7000 Black Glue 110ml for Mobile Screen and Frame Bonding
KATEX T7000 black glue 110ml gives your repair bench a flexible, dark adhesive for the joints that hold a phone together. When you refit a replacement display, a loose bezel, or a lifted back cover, the glue line sits between dark surfaces, so a black bond stays hidden instead of showing as a pale seam. The 110ml bottle suits workshops that bond screens every day and want to stop reordering small tubes every week. Mechanicpk stocks it for technicians who already know what a frame adhesive must do: grip glass, plastic and metal, stay elastic, and resist moisture.
How the Adhesive Behaves on Your Bench
T7000 comes as a semi-fluid black liquid, so it spreads in a controlled bead and levels along the joint. The cured bond stays elastic and waterproof, which matters on a display that flexes slightly each time a customer presses the screen. The adhesive bonds glass, plastic, metal, leather and fabric, so one bottle covers the screen-to-frame joint, the plastic bezel and the metal mid-frame. Surface drying takes about three minutes, which gives you a short window to position the part. Full cure takes 24 to 48 hours. Hold the parts with tape, clips or a rubber band during that time so the display sits flat and the gap closes evenly.
Where It Fits in Your Repair Workflow
Display replacement is the main job. You lift the old screen with a hot air station, clean the frame until no old adhesive or dust remains, and fix the phone in a PCB holder so it stays steady. Then you lay a thin, even bead of T7000 around the frame edge and press the new display into place. Use a microscope when you work near flex cable seats, and keep the glue off connectors and contact pads. The same process works on loose bezels, cracked-frame repairs, back covers that lift after a drop, and small plastic parts that came off a hardware fault repair. Clean, dry surfaces give the strongest bond, so wipe the joint before every application.
Why Technicians Pick the 110ml Bottle
Shops that handle display problems daily burn through small tubes fast. The 110ml size gives you more glue per bottle, so you refill your working applicator from one container and keep the counter organized. Store the bottle between 10°C and 28°C with the cap closed, and work in a ventilated area. The glue is hard to remove once it dries, so test-fit the display before you apply it. Pair it with reballing kits, soldering stations and multimeters in a complete bench setup, and you cover both the board-level fault and the final reassembly in one visit.
| Weight | 0.5 kg |
|---|
Key Features
- ✓110ml bottle for high-volume screen repair work
- ✓Black finish that blends into dark frames and housings
- ✓Semi-fluid formula that spreads and levels along the joint
- ✓Elastic cured bond that tolerates screen flex
- ✓Waterproof bond line
- ✓Bonds glass, plastic, metal, leather and fabric
- ✓Surface dry in about 3 minutes for fast positioning
- ✓Full cure in 24 to 48 hours
Specifications
| Brand | KATEX |
|---|---|
| Model | T7000 |
| Category | Mobile Repair Adhesive / Glue |
| Compatibility | Universal, not device-specific |
| Material Compatibility | Glass, plastic, metal, leather, fabric |
| Color | Black |
| Net Content | 110ml |
| Surface Dry Time | Approx. 3 minutes |
| Full Curing Time | 24 to 48 hours |
| Storage Temperature | 10°C to 28°C |
Common Repair Uses
- ✓Bonding and sealing work on screens, frames and housings in daily repair shop jobs.
- ✓Bonding a replacement display to its frame
- ✓Reseating a loose or lifted bezel
- ✓Fixing a back cover that lifted after a drop
- ✓Closing screen-to-frame gaps
- ✓Reattaching small plastic housing parts
- ✓Repairing cracked or separated frame sections
- ✓Sealing display edges against moisture
- ✓Fixing small parts on headset and tablet housings
Compatible Devices
- ✓Universal adhesive, not tied to a specific phone model. It works on screen, frame and housing joints of smartphones and tablets.
- ✓Android smartphone LCD and touch screen frames
- ✓iPhone display and bezel joints
- ✓Samsung display and frame joints
- ✓Tablet screen-to-frame joints
- ✓Plastic and metal mid-frame gaps
- ✓Back cover and housing seams
- ✓Bluetooth headset housings
- ✓Small plastic and glass parts on electronic devices
FAQ
What is the product name?
What is the brand of this product?
What is the model of this product?
What is this product used for?
Which devices are compatible with this product?
Who should use this product?
How long does T7000 black glue take to dry and cure?
Which materials does T7000 black glue bond?
Related products
RELIFE RL-004SA silicone pad – Anti-slip
In stock



