Koocu K02 Electrical Screwdriver | 20 Bit Dual Mode
₨ 1
Dual-Mode Electric Screwdriver for Mobile Repair
The Koocu K02 Electrical Screwdriver gives your bench a rechargeable, dual-mode driver built around 20 magnetic bits, a metal gearbox, and bi-directional rotation. You switch between electric and manual operation, set one of five torque levels across a 0.2–1.5 kg/cm range, and charge through Type-C. The kit adds a spring head, tweezer, and alloy steel back glass opener, so you open the housing and pull board screws with one set. Mechanicpk supplies the K02 to technicians and repair shops across Pakistan who want a spec-defined electric screwdriver for daily phone disassembly.
Out of stock
Koocu K02 Electrical Screwdriver for Precision Mobile Repair
The Koocu K02 Electrical Screwdriver covers the first and last stage of every board-level job: opening the device and closing it again. Screw removal looks trivial until a stripped Phillips head or an overtightened frame screw turns a clean repair into a salvage job. The K02 packs a metal gearbox, 20 magnetic bits, and adjustable torque into a cordless body, so you control driving force instead of relying on wrist feel. This page breaks down the verified specifications, the torque logic, and the K02’s place in a mobile repair workflow, so you can judge its fit for your bench before you order.
Dual-Mode Driving and Five Torque Levels
The K02 runs in two modes. Electric mode spins the bit at up to 200 RPM. Manual mode lets you break loose a stubborn screw by hand with the same body. Bi-directional rotation covers both removal and refitting. A five-level adjuster sets torque across a 0.2–1.5 kg/cm range. Low levels suit small phone-frame and board screws, where excess force strips threads or cracks a mounting point. Higher levels suit firmer fasteners. The metal gearbox handles that load, and the magnetic bits hold each screw while you lift it out. A 600mAh rechargeable lithium battery powers the motor. It charges through Type-C at DC 5V/1A in roughly 1.5 hours, and a battery indicator shows your remaining charge before you start a job.
Where the K02 Fits in a Mobile Repair Workflow
Every repair that reaches the mainboard starts with disassembly. You separate the back glass with the alloy steel opener, lift the housing, and remove the frame and shield screws before any soldering begins. The K02 drives those screws fast and keeps them on the magnetic tip, so small fasteners stay off the mat. After the board work, the same tool refits each screw at a controlled torque. That sequence covers charging issue repairs, display problem replacements, and hardware fault diagnosis, where you open the device, inspect the PCB under a microscope, and then rework with a hot air station or soldering station. Keep a PCB holder and a multimeter beside the screwdriver, and return each screw to its original position as you work.
Why Technicians Choose the Koocu K02 Electrical Screwdriver
Shops that open dozens of phones a day lose time on manual screw work, and wrist fatigue grows with volume. The Koocu K02 Electrical Screwdriver cuts that load, and its five torque levels protect plastic bosses and thin frames. The kit includes 20 magnetic bits, a spring head, a tweezer, and a back glass opener, so you start without buying separate accessories. If you are moving up from a basic manual set, the K02 gives you an electric tier with torque control at a practical level. Match the bit set to the models you open most, and expand the bench with reballing kits and test boxes as your work moves toward board-level repair.
| Weight | 0.5 kg |
|---|
Key Features
- ✓Dual mode operation: electric drive and manual use in one body
- ✓20 magnetic bits in the kit for secure screw pickup
- ✓Metal gearbox for steady torque transfer
- ✓Five-level torque adjuster, 0.2–1.5 kg/cm range
- ✓Bi-directional rotation for removal and refitting
- ✓Speed up to 200 RPM in electric mode
- ✓Rechargeable lithium battery with battery indicator, Type-C charging
- ✓Kit includes a spring head, tweezer, and alloy steel back glass opener
Specifications
| Brand Entity | Koocu |
|---|---|
| Product Entity | Koocu K02 Electrical Screwdriver |
| Technology Entity | Dual-mode (electric and manual) precision driver with metal gearbox and five-level torque adjustment |
| Compatible Device Entities | Smartphones, small electronics, small appliances (universal, bit-dependent) |
| Repair Process Entity | Device disassembly, back glass opening, screw removal and refitting |
| Industry Entity | Mobile phone repair and electronics repair in Pakistan |
Common Repair Uses
- ✓Mobile phone disassembly before board-level repair
- ✓Back glass opening with the alloy steel opener
- ✓Frame, shield, and bracket screw removal
- ✓Access for charging issue repairs
- ✓Access for display problem replacements
- ✓Opening devices for hardware fault diagnosis
- ✓Controlled screw refitting after repair
Compatible Devices
- ✓Universal screw-driving tool, not locked to one brand or chipset family. Fit depends on the bit type each device uses.
- ✓Smartphones with screw-secured housings and frames
- ✓Mobile mainboard shield and bracket screws
- ✓Small electronic devices
- ✓Small appliances with precision screws
- ✓General electronics repair
FAQ
What is the product name?
What is the brand of this product?
What is the model of this product?
What is this product used for?
Which devices are compatible with this product?
Who should use this product?
What torque range does the Koocu K02 electric screwdriver offer?
How do I charge the Koocu K02 and how long does it take?
Related products
ICFRIEND UFS eMMC ISP Adapter for MiPi Tester & F64 Box
In stock
JZQ-599B Soldering Iron Tip Cleaner with Tin Cleaning Ball
Out of stock



