Qianli iP-02 Reballing Platform for iPhone 11 Pro Max

₨ 4,500

Qianli iP-02 Middle Frame Reballing Platform for iPhone 11 Series

A middle frame reballing platform holds the two-board stack steady while you reball the middle board. The Qianli iP-02 is built for the iPhone 11, 11 Pro and 11 Pro Max, and its metal body is CNC machined and laser cut. Each board seats into its position, so the balls land on the pads you intended. You then apply tin through the stencil and reflow the set on a preheater. If your bench handles iPhone X, XS or XS Max boards, the separate iP-01 platform covers those models.

Out of stock

18 People watching this product now!
Description

Middle Frame Reballing Platform for iPhone 11 Pro and 11 Pro Max

A middle frame reballing platform gives you a fixed reference point before any tin touches the board. The iP-02 covers the iPhone 11, 11 Pro and 11 Pro Max, so one fixture handles the whole 11 series in your shop. Its metal base comes from high-precision CNC processing and laser cutting, which keeps the seating surfaces true from one job to the next. Your workflow starts with seating both boards correctly and ends with a reflowed set of balls ready for reassembly. Each stage matters, so the sections below walk through them in order.

How the Platform Holds the Two Boards

The iP-02 uses a metal body with machined seating areas for the boards. You place the board in its slot and check that it sits flat without rocking. Alignment decides whether each ball lands on its intended pad. A small offset causes bridged balls or missed contacts, and those faults often appear only after the board goes back into the phone. Take a few extra seconds at this stage because it prevents rework later. Treat the seating check as a required step, not an optional one.

Tin Deposition Through the Stencil

Once both boards are seated, you apply tin through the stencil openings over each pad set. Spread the paste evenly across the openings and scrape off the excess so every pad holds a controlled amount. Lift the stencil straight up to avoid smearing the fresh deposits. Inspect the pads under magnification before you move on, because a missed or smudged pad costs more time to fix than it takes to check. Work at a steady pace so the paste stays workable through the whole board.

Preheating and Reflow Before Reassembly

After deposition, move the board to a preheater and bring it up to temperature gradually. The heat reflows the tin into uniform balls across the pads. Let the board cool before you handle it, since rushed heating can lift pads or leave uneven balls. Once cool, lift the board off the platform and inspect the ball pattern. Only reassemble after the balls look uniform, because a weak set of balls is much harder to correct once the two boards are mated.

Additional information
Weight0.19 kg
Q & A
Please login to post questions

Key Features

  • Metal body with CNC high-precision processing
  • High-precision laser-cut construction
  • Designed for iPhone 11, 11 Pro and 11 Pro Max
  • Holds both boards during the reballing process

Specifications

BrandQianli
ModeliReball iP-02
CategorySoldering Tools, Motherboard Holders and Pre-heaters
CompatibilityiPhone 11, iPhone 11 Pro, iPhone 11 Pro Max
Supported DevicesiPhone 11, iPhone 11 Pro, iPhone 11 Pro Max
TechnologyCNC high-precision processing, high-precision laser cutting
MaterialMetal

Common Repair Uses

  • Middle board reballing for iPhone 11 series boards
  • Aligning both mating boards before tin deposition
  • Applying tin through the stencil over each pad set
  • Reflowing the balls on a preheater before reassembly

Compatible Devices

  • iPhone 11
  • iPhone 11 Pro
  • iPhone 11 Pro Max
  • Not for iPhone X, XS or XS Max (use the iP-01 platform for those models)

FAQ

What is the product name?
The product name is Qianli iReball iP-02 Middle Frame Reballing Platform.
What is the brand of this product?
The brand of this product is Qianli.
What is the model of this product?
The model of this product is iReball iP-02.
What is this product used for?
This product is used for reballing the middle frame board of iPhone 11 series devices.
Which devices are compatible with this product?
This product is compatible with iPhone 11, iPhone 11 Pro and iPhone 11 Pro Max.
Who should use this product?
This product is suitable for mobile repair technicians, repair shops, service centers, and professional users.
Can the iP-02 hold an iPhone 11 Pro Max board for reballing?
Yes, the platform lists the iPhone 11 Pro Max as an applicable model alongside the iPhone 11 and 11 Pro.
Is this platform suitable for iPhone X or XS boards?
No, the iP-02 targets the iPhone 11 series only, and Qianli lists the iP-01 for iPhone X, XS and XS Max.