MT6308MP Envelope Tracker IC – MediaTek Power IC
₨ 350
MT6308MP Envelope Tracker IC for RF Power Supply Repair
The MT6308MP is a MediaTek envelope tracker IC that controls the supply voltage feeding the RF power amplifier in a 5G handset. Instead of running the amplifier at a fixed voltage, it follows the signal envelope, which reduces wasted power when transmit levels drop. For technicians, this chip belongs in your RF diagnostics stage, after you confirm the baseband and CPU rails are healthy. Teardown analysis confirms a single-die chip-scale package built on a 150 nm CMOS process. This page covers its verified role, its confirmed device reference, and where it fits on your repair bench.
MT6308MP Envelope Tracker IC Overview and Repair Workflow
The MT6308MP envelope tracker IC is a MediaTek power management part that sits between the phone’s supply rail and the RF power amplifier. It adjusts the amplifier supply voltage to match the signal envelope, which cuts wasted power as transmit levels change. Teardown work traces this part to a single MediaTek die built on a 150 nm process, housed in a single-die chip-scale package. Because it feeds the RF path, it belongs in the RF diagnostics stage of your repair workflow, not in CPU or boot-level fault tracing. The sections below cover its verified role, the one device teardown confirms, and where its limits lie.
How Envelope Tracking Changes the RF Supply Path
A fixed-voltage supply forces the power amplifier to waste energy whenever the transmit signal runs below its peak. An envelope tracker reads the signal envelope and raises or lowers the supply to follow it. This keeps the amplifier efficient across changing power levels, which directly helps battery life on 5G handsets. The MT6308MP performs this supply job, so a fault on its output can look like an RF transmit problem rather than a charging or display fault. When you measure the RF rails, treat the tracker as a supply element first and an RF element second. Record the rail voltage and the transmit behavior together, because that pairing shows whether the tracker or the amplifier has failed.
Teardown Findings: Die, Package and Process
Floorplan analysis identifies the MT6308MP as a single silicon die with one redistribution layer inside a chip-scale package. The die uses two-layer passivation, five aluminum metal layers, tungsten contacts, and a single polysilicon layer. The reported fabrication route is UMC’s 150 nm CMOS process on 200 mm wafers. An envelope tracker needs passive components that cannot fit inside the IC package, so the surrounding PCB decides much of the final performance. Architecture analysis of the sibling MT6308P, taken from an OPPO 5G handset board, confirms this design dependency. On your bench, a healthy IC does not guarantee a healthy supply path, so inspect the nearby passives before you condemn the chip.
Confirmed Device Reference and Where It Fits
The verified device reference for the MT6308MP is the Samsung Galaxy A14 5G, model SM-A146P, which runs the MediaTek MT6833 Dimensity 700 chipset. Teardown confirms the part on this board, but no wider device list has been verified, so do not assume it fits other models. Check the part number on the board, then match it to the reference before you order replacements. This IC supplies the RF amplifier, not the CPU core, so a dead phone with a boot loop or hang on logo should send you to other rails first. Keep the RF path as your first diagnostic target when the fault centers on transmit performance.
| Weight | 0.1 kg |
|---|
Key Features
- ✓Envelope tracking architecture that adjusts the RF amplifier supply voltage
- ✓Single silicon die with one redistribution layer in a chip-scale package
- ✓Reported UMC 150 nm CMOS process on 200 mm wafers
- ✓Passive components sit outside the package and on the surrounding PCB
- ✓Confirmed teardown reference on Samsung Galaxy A14 5G (SM-A146P)
Specifications
| Brand | MediaTek |
|---|---|
| Model | MT6308MP |
| Category | Envelope Tracking Power IC |
| Compatibility | Confirmed on Samsung Galaxy A14 5G (SM-A146P) teardown reference |
| Supported Devices | Samsung Galaxy A14 5G (SM-A146P) |
| Technology | Envelope tracking; single-die chip-scale package; reported UMC 150 nm CMOS |
Common Repair Uses
- ✓Diagnosing RF transmit faults by checking the tracker’s supply output before replacing the power amplifier
- ✓Confirming the envelope tracker path when weak transmit performance appears after a board-level repair
- ✓Reballing or replacing the chip-scale package only after a supply rail check confirms tracker failure
- ✓Verifying the part marking against the Galaxy A14 5G reference before ordering a replacement
- ✓Studying envelope tracking supply layouts on a 5G handset board for repair training
Compatible Devices
- ✓Verified against one teardown reference only; no broader device list is confirmed.
- ✓Samsung Galaxy A14 5G (SM-A146P), confirmed teardown reference
- ✓MediaTek MT6833 Dimensity 700 platform, the chipset on that reference device
FAQ
What is the product name?
What is the brand of this product?
What is the model of this product?
What is this product used for?
Which devices are compatible with this product?
Who should use this product?
Does the MT6308MP power the CPU?
What process node is the MT6308MP built on?
Related products
A3B U2 610A3B Charging Power IC iPhone 7,7+ Tristar U4001
In stock



