PM8250 003 Power IC – Qualcomm PMIC for Mobile Repair
₨ 650
PM8250 003 Power IC for Qualcomm Platform Repair
Qualcomm built the PM8250 as a core power management IC for its 8250-series platform. Your repair bench sees it when a board shows no power, unstable rails, or a dead-after-charging fault. Qualcomm documents the PM8150B as the interface PMIC for charger and fuel gauge functions, so the two chips belong to the same family and should be tested together. Confirm the marking on the board before you order, because the 003 suffix appears in supplier listings and must match the datasheet. This page covers identification, the repair workflow around the chip, and only the compatibility we can verify.
PM8250 003 Power IC: Role in the Power Tree
The PM8250 003 Power IC sits at the core of power delivery on Qualcomm 8250-series boards. Qualcomm describes the PM8250 as the core PMIC, responsible for core power and for options with lighting. When a handset shows no response, a boot loop, or a fault that looks like a processor problem, this chip belongs on your suspect list. Knowing where it sits in the power tree lets you test the right rails before you commit to a costly board-level repair. That discipline separates a fast diagnosis from a guess that wastes parts and bench time.
Diagnosing Power Faults Before You Replace Anything
Start every case with a measurement, not a replacement. Check the battery path and the charging input first, then move to the rails that the power IC feeds. A current-limited bench supply shows whether a rail draws abnormal current, which often points toward a short downstream of the PMIC. Compare each reading against a known good board of the same model, because absolute values differ between designs and a single number rarely tells the whole story. If a rail stays dead while its input looks healthy, the PM8250 becomes a strong candidate. Dead phone cases often combine a power fault with a corrupted boot sequence, so work through the sequence step by step rather than trusting one reading. Log every measurement so you can trace the fault path if the first repair does not hold.
Working With the PM8150B Interface PMIC
Qualcomm pairs the PM8250 family with the PM8150B, which it documents as the interface PMIC for charger and fuel gauge functions. This split matters on the bench. A charging issue does not always mean the core power IC has failed, because the interface PMIC controls charge behavior and battery reporting. Test the charging input, the charge path, and the fuel gauge reporting before you pull the core chip. If the charge path checks out and the rails still fail, the PM8250 moves up your list. Record the markings of both chips on the board and note which one you tested, the readings you took, and the outcome. That record speeds up future cases on the same board family and keeps your service history accurate.
Identifying and Reworking the Qualcomm PMIC
The 003 suffix appears in supplier listings for this part, so confirm the full marking on the board before you source a replacement. Match it against the datasheet and the board reference rather than relying on a catalog title alone. Use a microscope to read the marking cleanly, especially on a heat-damaged chip where print can fade. When you rework a power IC, control the hot air profile and protect nearby components, because a lifted neighbor can create a new fault. Lead-free solder needs higher temperatures, so set your station with that in mind. Clean the pads, apply flux, and verify alignment before you reflow. Test the board fully after reballing and before you return it to the customer, since a clean-looking joint does not prove that the rails came back up.
| Weight | 0.1 kg |
|---|
Key Features
- ✓Core PMIC role for core power, as documented by Qualcomm
- ✓Core power and lighting options within the PM8250 family
- ✓Part of the 8250-series PMIC family
- ✓Interface PMIC pairing with the PM8150B for charger and fuel gauge functions
- ✓Regulated voltage supply role within the Qualcomm PM8xxx PMIC family
- ✓Suited to board-level replacement on a rework bench
- ✓Identification by printed marking before ordering
- ✓Diagnosis-first workflow using rail measurement
Specifications
| Brand | Qualcomm |
|---|---|
| Model | PM8250 003 |
| Category | Power IC |
| Technology | Power management IC (PMIC) |
| Compatibility | Qualcomm 8250-series platform family |
Common Repair Uses
- ✓Diagnosing no-power faults on 8250-series boards
- ✓Measuring core power rails during dead phone troubleshooting
- ✓Isolating a charging issue between the PM8250 and the PM8150B
- ✓Replacing a faulty power IC during board-level IC change
- ✓Reballing and reflowing the power IC with hot air rework
- ✓Checking rails for shorts before installing a replacement chip
- ✓Verifying the printed marking before sourcing a replacement part
- ✓Testing a repaired board for stable power-up and boot sequence
Compatible Devices
- ✓Chipset-family scope only, not device-specific
- ✓Qualcomm 8250-series platform boards
- ✓Boards using a PM8150B interface PMIC alongside the core PMIC
- ✓Qualcomm QRB5165 reference-design power architecture
- ✓Handset-level compatibility is not verified; match against the board part number
- ✓Core power rail repair on 8250-series boards
- ✓Replacement sourcing that matches the printed PM8250 003 marking
- ✓Boards requiring core PMIC testing during charging or power-up faults
- ✓Rework of power ICs on lead-free boards with a hot air station



