YCS-6575X Ultra HD Trinocular Microscope 6.5X-75X

Original price was: ₨ 69,000.Current price is: ₨ 66,000.

Trinocular Microscope for Mobile Repair

The YCS-6575X is a trinocular microscope for mobile repair built around a 6.5X to 75X continuous zoom stereo system. You get a 45-degree inclined head that swivels 360 degrees, WF10X/23mm adjustable eyepieces, a 144-LED ring light with touch-adjustable brightness, and a large metal base for steady work at high magnification. The trinocular port takes a camera through a 0.5X CTV lens adapter, so you record or stream the same view you see through the eyepieces. Use it for BGA reballing, fine-pitch SMD soldering, IC change karna and board inspection on phone and laptop motherboards. Mechanicpk supplies it to Pakistani repair shops and service centers.

In stock

20 People watching this product now!
Description

Trinocular Microscope for Mobile Repair: YCS-6575X Optical Platform

A trinocular microscope for mobile repair earns its place on the bench when it pairs a wide zoom range with a stable stand and a dedicated camera port. The YCS-6575X from YCS covers all three. You get a 6.5X to 75X continuous zoom stereo system, a 45-degree inclined head that swivels 360 degrees, and a 144-LED ring light that lights the board without hard shadows. On a dead phone or a charging issue, the fault often traces back to one cracked joint or one bridged pad that you cannot see at 10X. This listing walks through what each optical and mechanical element does for your board-level workflow.

Zoom Range and Eyepiece Optics

A 0.65X to 7.5X objective, paired with WF10X/23mm adjustable eyepieces, produces the continuous 6.5X to 75X range. Continuous zoom means you move from a full-board overview to a single capacitor pad without swapping objectives or losing your target. Start near 6.5X to locate the damaged area, then zoom in as you commit to the rework.

The wide-angle, high eye-point eyepieces let you work longer without pressing your face against the lens, which cuts fatigue during an hour-long reball. As a stereo microscope, the YCS-6575X gives you a three-dimensional view, so you judge component height and solder fillet shape directly instead of guessing from a flat image. The metal zoom knob gives you a firm, repeatable control when you adjust magnification mid-repair.

Trinocular Port for Camera and Documentation

The third optical port separates this microscope from a standard binocular unit. You keep both eyes on the eyepieces while a camera captures the same view. The YCS-6575X uses a 0.5X CTV lens adapter that keeps the monitor image and eyepiece zoom synchronized, so what you see through the lens matches what appears on screen.

An HDMI 4K camera is available as an optional accessory for this microscope. Pair it with a monitor and you record before-and-after shots for customer proof, train junior technicians on a live board, or stream a repair to a remote client. Service centers and training institutes get the most from this port, since one technician demonstrates while a whole group watches the same image.

144-LED Ring Light and Shadow Control

Lighting decides whether you read a board or squint at it. The 144-LED ring light mounts around the lens, snaps into place and uses a dustproof design. Touch-adjustable brightness lets you lower the output on reflective shield cans and raise it on dark, densely packed areas near the CPU.

Ring illumination surrounds the lens axis, so shadows stay minimal around tall parts such as connectors and shield frames. You see flux residue, bridged pins and lifted pads without tilting the board under a separate lamp. Low energy use means you leave the light on across a full shift without a second thought.

Large Metal Base, Bracket and Bench Stability

Vibration ruins fine soldering at 75X, so the stand matters as much as the glass. The YCS-6575X sits on a large metal base plate that gives you a stable platform for phone boards, laptop motherboards and PCB holders. The bracket adjusts freely and the lens module rotates 360 degrees, so you reposition the head over a different board area without shifting the board itself.

The wide base leaves room for a PCB holder, your tweezers and a clear path for a hot air station nozzle. Lock the board in a holder from the PCB Holders category, then use the zoom to work on one corner at a time.

Where the YCS-6575X Fits in Your Repair Workflow

In a typical board-level job, the microscope sits between diagnosis and rework. You trace the fault with a multimeter, confirm the suspect area under magnification, then move to your soldering station or hot air station for the actual IC change karna or jumper lagana. After the rework, you inspect every joint under the same lens before you reassemble the phone.

Reballing kits depend on this step, since a missed bridge at a BGA edge shows up under magnification long before it shows up as a hardware fault on the customer’s phone. For eMMC and UFS work, the microscope also lets you check pad condition and ISP pinout wire placement before you connect your programmer or start box chalana.

If your bench still runs on a binocular unit or a loupe, the YCS-6575X is a clear upgrade path to a documented, camera-ready workflow. Browse the Soldering Stations, Hot Air Stations, Multimeters, Reballing Kits, PCB Holders, ISP Pinout Tools, eMMC Programmers, UFS Adapters and Test Boxes categories at Mechanicpk to build the complete bench around it.

Additional information
Weight6.0 kg
Q & A
Please login to post questions

Key Features

  • 6.5X to 75X continuous zoom stereo optical system
  • 0.65X to 7.5X objective lens
  • WF10X/23mm adjustable wide-angle, high eye-point eyepieces
  • 45-degree inclined head with 360-degree swivel
  • Trinocular port with 0.5X CTV lens adapter, monitor and eyepiece zoom synchronized
  • 144-LED ring light with touch-adjustable brightness, dustproof snap-on design
  • Large metal base plate with freely adjustable bracket
  • Metal zoom knob for firm, repeatable focus control

Specifications

BrandYCS
ModelYCS-6575X
CategoryMicroscopes
CompatibilityUniversal optical inspection tool, not device-specific; camera port uses a 0.5X CTV lens adapter
Supported DevicesMobile phone motherboards, laptop motherboards and PCBs (universal, not device-specific)
TechnologyStereo trinocular microscope with 6.5X–75X continuous zoom, 0.65X–7.5X objective, WF10X/23mm adjustable eyepieces, 45-degree inclined 360-degree swiveling head, 144-LED ring light with touch-adjustable brightness
MaterialLarge metal base plate, metal zoom knob

Common Repair Uses

  • Board-level inspection, soldering and rework under 6.5X–75X magnification
  • BGA reballing and ball-alignment inspection
  • Fine-pitch SMD soldering
  • IC change karna and pad alignment checks
  • Charging port pad repair and charging issue tracing
  • Jumper lagana on damaged tracks
  • Flux residue and solder bridge inspection
  • eMMC and UFS pad inspection before ISP wire placement
  • Recording repairs for customer proof and technician training

Compatible Devices

  • Universal optical tool for board-level inspection, not tied to specific phone models or chipsets
  • Android smartphone motherboards (universal, any brand)
  • iPhone logic boards (universal)
  • Laptop motherboards
  • Tablet and other electronics PCBs
  • BGA and SMD components on any board
  • Charging port, connector and FPC pads
  • Optional HDMI 4K camera through the 0.5X CTV lens adapter
  • PCB holders and bench fixtures on the large metal base

FAQ

What is the product name?
The product name is YCS-6575X Ultra HD Trinocular Microscope.
What is the brand of this product?
The brand of this product is YCS.
What is the model of this product?
The model of this product is YCS-6575X.
What is this product used for?
This product is used for magnified inspection and soldering work such as BGA reballing, SMD soldering, IC replacement and PCB inspection on phone and laptop boards.
Which devices are compatible with this product?
This product is a universal optical tool, so it works with any phone, laptop or electronics board you place under it. It is not device-specific.
Who should use this product?
This product is suitable for mobile repair technicians, repair shops, service centers, and professional users.
What is the magnification range of the YCS-6575X?
The YCS-6575X covers 6.5X to 75X continuous zoom through a 0.65X to 7.5X objective and WF10X/23mm adjustable eyepieces.
Can I connect a camera to the YCS-6575X to record repairs?
Yes. The trinocular port takes a camera through a 0.5X CTV lens adapter, which keeps the monitor and eyepiece zoom synchronized. An HDMI 4K camera is available as an optional accessory.