Universal Mic Black Long Wire for Android Mobiles

₨ 1

The universal mic long wire for Android gives your repair bench a black wired microphone built for mic replacement jobs on Android handsets. The extended lead reaches the mic pad or connector point without forcing you to stretch the cable across the board. You fit it on phones that show a dead mic, a muffled voice on calls, or no voice in voice recordings. Mechanicpk supplies it to technicians, repair shops, and service centers across Pakistan who want a dependable spare microphone part in stock. Keep a few in your parts drawer and you cut the wait on common mic-fault repairs.

Out of stock

20 People watching this product now!
Description

A faulty microphone sends a phone back to your counter fast. The caller says “awaaz nahi aa rahi,” the voice recorder captures silence, and the customer wants the phone back the same day. The universal mic long wire for Android covers that exact fault with a single stocked part, so you do not hunt for a model-specific mic every time.

This is a black wired microphone with an extended lead. The longer wire matters on the repair bench. On many Android boards the mic position sits away from the nearest clean solder point, and a short lead forces you into awkward routing or a second joint. With a long lead you route the wire along the frame or under the shield path, place the mic where the phone body allows, and keep the joint count low. Fewer joints mean fewer failure points after reassembly.

The universal format gives you stock efficiency. Instead of buying a separate mic for each handset, you keep one wired mic type that suits phones where the mic is a replaceable unit. Fit still depends on the board layout, so check the mic pad or connector position on the phone in front of you before you commit to the job. Confirm the original mic location, trace the wire route, and decide how you will secure the mic in the housing.

Where this part fits in the repair workflow: diagnose first. Test the mic fault with a call and a voice recording, clean the area, and rule out a software cause before you open the board. If the mic is the failed part, remove the old mic, prepare the pads, and solder the new wire with a controlled iron or soldering station at a temperature that protects the pads. A microscope helps you inspect the pad condition and the final joint. A multimeter helps you check continuity along the wire route and confirm there is no short to the shield or frame before you power on.

Technicians in Pakistan meet this fault in several forms. Some phones show a dead mic after a drop. Some develop a weak voice after liquid exposure and cleaning. Others lose the mic after a previous repair attempt damaged the pad. The wire replaces the failed microphone path in all of these cases when the board pads remain intact. If the pad is lifted or the track is damaged, you repair the pad first with jumper wire work (jumper lagana) and then fit the mic.

You also protect your bench time. A universal mic gives you a fast swap for the common hardware fault, which keeps your queue moving and your turnaround honest. Shops that handle high volumes of Android repairs benefit most, because the same part serves multiple jobs and reduces the number of separate SKUs on your shelf.

Pair this part with the right supporting tools from the Mechanicpk catalog. Soldering Stations give you the heat control for small pads. Hot Air Stations help when the mic sits under a shield you must lift. Microscopes let you inspect tiny joints. Multimeters confirm continuity. PCB Holders keep the board steady while you work, and Test Boxes help you rule out software faults before you blame hardware.

Handle the wire with care during installation. Avoid sharp bends near the solder joint, avoid pulling the lead against the pad, and secure the mic so it does not vibrate against the frame. After the repair, run a voice call test, a speaker-call test, and a recording test to confirm the mic picks up clearly from the intended position.

Mechanicpk lists the universal mic long wire for Android under mobile repair parts for technicians who want a straightforward, practical microphone replacement part. You get a black wired mic with an extended lead, a universal approach to stock, and a clear role in the diagnosis, repair, and testing workflow of your Android repair bench.

Additional information
Weight0.1 kg
Q & A
Please login to post questions

Key Features

  • Universal wired microphone for Android mobile repair
  • Black finish
  • Long lead that reaches distant mic pads and routing paths
  • Reduces joint count compared with short-lead mics
  • Suits common dead mic and weak voice repairs
  • Fits easily into a general-purpose repair parts stock
  • Works with standard soldering bench tools
  • Supports a clear diagnose, replace, and test workflow

Specifications

CategoryMobile Repair Parts – Microphone
CompatibilityUniversal Android mobile phones (fit depends on board mic pad or connector position)
ColourBlack
TypeWired microphone with long lead

Common Repair Uses

  • Microphone replacement on Android mobile phones in workshop repair jobs.
  • Dead mic replacement
  • Voice not reaching the caller during calls
  • Low or muffled mic output
  • Mic replacement after liquid damage cleaning
  • Mic replacement after a drop
  • Replacing a mic damaged by a previous repair attempt
  • Mic wire rerouting on boards with a distant solder point
  • Post-repair call and recording testing

Compatible Devices

  • Universal scope for Android mobile phones. Not model-specific. Confirm the mic pad or connector position on the board before fitting.
  • Universal Android mobile phones
  • Android handsets with a replaceable wired mic
  • Phones with a dead mic complaint
  • Phones with a low or muffled voice during calls
  • Phones where the mic pad sits far from the nearest solder point
  • Android models used in general repair shop work
  • Service center Android repair jobs
  • Boards where the original mic needs replacement

FAQ

What is the product name?
The product name is Universal Original Mic Black Long Wire for Android Mobiles.
What is the brand of this product?
Mechanicpk supplies this product as a universal mobile repair part.
What is this product used for?
This product replaces a faulty microphone on Android mobile phones with a dead mic or weak voice complaint.
Which devices are compatible with this product?
This product suits universal Android mobile phones. Fit depends on the mic pad or connector position on the board, so check the board before fitting.
Who should use this product?
This product suits mobile repair technicians, repair shops, service centers, and professional users.
Will this mic fit every Android phone?
It follows a universal approach, but the board layout decides the fit. Check the mic pad or connector position on your phone and confirm the wire can reach it before you start the repair.
How do I confirm the mic is the faulty part before I replace it?
Test with a normal call and a voice recording first. If the voice stays silent or weak in both, rule out software and check the mic pad and continuity with a multimeter, then replace the mic if the pad and track are intact.