Sunshine P-3005D 5A 30V DC Power Supply
₨ 18,000 Original price was: ₨ 18,000.₨ 15,500Current price is: ₨ 15,500.
0-30V Bench Power for Phone Repair
The Sunshine P-3005D 5A 30V DC Power Supply gives your repair bench a transformer-based regulated source with 0-30V and 0-5A adjustable output. A 3-digit LED display shows voltage and current together, so you read the load of a dead phone or a short on the board the moment you connect it. Voltage stability holds at 0.01% + 2mV and voltage ripple stays at or below 1mV RMS, which keeps readings clean when you chase a charging issue or a boot loop fault. The input switches between 110V and 220V. Order it from Mechanicpk for your mobile repair workshop.
In stock
Sunshine P-3005D: A 30V 5A DC Power Supply for Mobile Repair
Board-level repair starts with a power source you can control and read. The Sunshine P-3005D 5A 30V DC Power Supply is a single-channel, transformer-based regulated unit, and Mechanicpk supplies it as a 30V 5A DC power supply for mobile repair benches, service centers, and training labs. It replaces a charger-and-guess routine with a measured, adjustable supply. You set the voltage, set the current, and watch the board’s real consumption on the display. That feedback tells you whether a dead phone draws nothing, draws too much, or draws a healthy amount.
Electrical Performance and Regulation
The P-3005D outputs 0-30V DC and 0-5A, both continuously adjustable, and the current range switches between 1A and 5A. Voltage stability measures at or below 0.01% + 2mV, and current stability measures at or below 0.1% + 3mA. Output recovery time sits at or below 100µs, and the voltage temperature coefficient stays at or below 200PPM/°C. Ripple and noise stay low, at or below 1mV RMS on voltage and 2mA RMS on current. These figures matter at the bench. A stable, quiet supply keeps your current readings steady while you compare a faulty board against a known-good one.
Display, Build, and Bench Handling
A 3-digit LED display shows voltage and current at the same time, with a stated accuracy of ±1% ±1 bit. A pure copper transformer carries the load and resists long short-circuit conditions, which suits a bench where boards with shorts connect all day. Intelligent ventilation manages heat, and the three-hole socket gives a grounded mains connection. The input runs on AC 110V/220V ±10% with a selector switch, so you check the switch position before you plug in on Pakistan’s 220V mains. The unit measures 265 × 153 × 125 mm and weighs 4.2 kg, so it fits a standard repair bench without crowding your microscope or soldering station.
Where It Fits in Your Repair Workflow
You use this supply at the start and the end of a repair. At the start, you power a dead phone through the battery connector, raise the voltage in steps, and watch the current. A steady high draw points to a hardware fault on the battery line, such as a shorted capacitor or a failed power IC. A phone that draws nothing sends you to the charging path, the connector, or the main power section. The same method helps with a boot loop issue, a phone that hangs on logo, and a board that goes dead after flash, because the current pattern shows whether the board attempts to boot.
At the end of a repair, you use it for the power-on test after an IC change or a reballing job. Pair it with a multimeter for point-to-point checks, a microscope for inspection, a hot air station or soldering station for rework, a PCB holder for stable positioning, and a test box when your workflow calls for one. The supply sits at the center of that setup and tells you whether each repair step actually worked.
Choosing the P-3005D for Your Bench
The P-3005D suits technicians who want a dependable 30V/5A source with a clear 3-digit readout and low ripple, without paying for extra display digits. If you need a 4-digit display, the Sunshine P-3005DA is the step up in the same family. Repair shop owners buying for several benches gain a uniform supply across every technician’s desk, which makes current readings and repair notes consistent. The package contains the regulated DC power supply and a power cord.
| Weight | 4.0 kg |
|---|
Key Features
- ✓Single-channel output, 0-30V and 0-5A, continuously adjustable
- ✓Switchable current range of 1A and 5A
- ✓3-digit LED display for voltage and current with ±1% ±1 bit accuracy
- ✓Voltage stability at or below 0.01% + 2mV
- ✓Voltage ripple at or below 1mV RMS and current ripple at or below 2mA RMS
- ✓Pure copper transformer built for long short-circuit endurance
- ✓Intelligent ventilation and heat dissipation
- ✓Switchable AC 110V/220V ±10% input with a three-hole grounded socket
Specifications
| Brand Entity | Sunshine |
|---|---|
| Product Entity | Sunshine P-3005D 30V 5A regulated DC power supply |
| Technology Entity | Transformer-based regulated DC power supply with 3-digit LED display |
| Compatible Device Entities | Android smartphone mainboards, iPhone logic boards, tablet mainboards, general DC electronics boards |
| Repair Process Entity | Current-draw diagnosis, short circuit tracing, power-on testing after IC replacement |
| Industry Entity | Mobile phone repair, PCB repair, electronics repair bench |
Common Repair Uses
- ✓Current-draw diagnosis on a dead phone
- ✓Short circuit tracing on the battery power line
- ✓Charging issue testing on the charging path
- ✓Power checks on boot loop faults
- ✓Fault diagnosis on boards that go dead after flash
- ✓Hardware fault checks on phones that hang on logo
- ✓Power-on testing after IC change or reballing
- ✓Powering a board on the bench without its battery
Compatible Devices
- ✓Universal, not device-specific. Any board that runs within 0-30V and 0-5A DC.
- ✓Android smartphone mainboards powered through the battery connector
- ✓iPhone logic boards powered through the battery connector
- ✓Tablet and iPad mainboards
- ✓Feature phone boards
- ✓Laptop motherboards within 30V and 5A
- ✓Power bank and charger circuit boards
- ✓Bluetooth speaker and earbud circuit boards
- ✓General DC-powered electronic modules within 0-30V and 0-5A
FAQ
What is the product name?
What is the brand of this product?
What is the model of this product?
What is this product used for?
Which devices are compatible with this product?
Who should use this product?
Can the Sunshine P-3005D run on 220V mains in Pakistan?
How stable is the output of the Sunshine P-3005D?
Related products
8-in-1 Anti-Static PCB Brush Set for Mobile Motherboard
Out of stock
Kailiwei 041 Precision Screwdriver Set Y0.7 Y1.5 Y2.5 T1
In stock
Mechanic 900M-T-I Soldering Iron Tip for Precision Repair
In stock


