Amaoe SSD2 BGA Reballing Stencil 0.25mm for SSD NAND
₨ 599
SSD NAND Reballing Stencil, 0.25mm
The Amaoe SSD2 BGA Reballing Stencil gives you a 0.25mm ultra-hard steel template for SSD NAND flash, DDR memory and controller packages. The layout covers DDR4 BGA78 and BGA96, DDR5 BGA82 and BGA102, NAND BGA132, BGA152, BGA154, BGA178, BGA272 and BGA316, plus the 1620 SSD BGA291 controller. Square, precision-cut holes support even solder ball placement, and the reusable steel mesh serves repeated jobs on your repair bench. Mechanicpk supplies this SSD2 BGA reballing stencil to technicians, repair shops and service centers across Pakistan who rework SSD boards at chip level.
In stock
SSD2 BGA Reballing Stencil for NAND, DDR and Controller Rework
The Amaoe SSD2 BGA Reballing Stencil does one job well: it restores solder balls on SSD memory and controller packages after you lift them from the board. Amaoe cuts the SSD2 template from 0.25mm ultra-hard steel with square apertures, and the layout list covers DDR4, DDR5, NAND and one SSD controller package. If your bench already runs reballing kits for eMMC and UFS chips, this stencil extends the same skills into SSD board repair. This page lists exactly which packages the template covers and where it fits in a rework sequence, so you can match it to the chip on your table before you order. Mechanicpk lists it for buyers who already know their chip package and want a stencil matched to it, not a generic mesh. Technicians searching for an SSD NAND reballing stencil get a package-by-package list here that they can verify against the chip in front of them.
SSD NAND Reballing Stencil Coverage and Build
The SSD2 layout set covers DDR4 BGA78 and BGA96, DDR5 BGA82 and BGA102, NAND BGA132, BGA152, BGA154, BGA178, BGA272 and BGA316, and the 1620 SSD controller in BGA291. Stencil thickness sets how much solder each aperture deposits, and this 0.25mm BGA reballing stencil sits above the 0.15mm that Amaoe uses on its eMMC and UFS stencils. The precision-cut square holes support even ball placement across the pad field. Because the steel mesh is reusable, one stencil serves many chips across repeated jobs. Check the package code printed on your chip against the list above before you buy, since a stencil only works when its aperture map matches the pad map exactly. Each BGA code refers to the package’s ball count and pad layout, so a BGA316 NAND part and a BGA152 NAND part need different apertures even when both sit on the same drive. Amaoe markets the SSD2 in its Super Hard series for professional IC repair, which fits a bench that reuses the template daily.
Where the Stencil Sits in an SSD Rework Workflow
Your sequence starts with removal. You lift the NAND or DDR chip with a hot air station, clean the old solder off the chip pads with flux and a soldering station, and inspect the pads under a microscope. Next you secure the chip in a PCB holder or positioning fixture, align the stencil over the pads, and fill the apertures with solder paste or balls. A controlled reflow forms fresh balls, and a second look under magnification confirms clean, uniform spheres. Before you refit the chip, test continuity with a multimeter so a dead SSD with a hardware fault does not return for the same issue. Technicians who change chips on SSD boards every week rely on this sequence because it makes every stage easy to check. Wipe the stencil with flux remover or isopropyl alcohol after each job so residue does not clog the square apertures on the next chip. Keep the template flat and stored apart from loose tools to protect the mesh between jobs.
Choosing SSD2 Against SSD1 and SSD3
Amaoe sells three SSD stencils, and each targets a different group of packages. SSD1 (0.2mm) covers BGA96 DDR, BGA136, BGA152, BGA132, BGA272, BGA316 and BGA100, along with controller markings such as AS2258-BN, 2246XT, 2246EN and 2258XT. SSD3 (0.15mm) covers controllers such as IG5669FAA, IG5236CAA and IG5220BAA. The SSD2 BGA reballing stencil stands apart because it adds DDR4 and DDR5 memory, NAND BGA154 and BGA178, and the BGA291 controller package. Read your chip’s package code first, then pick the stencil that lists it. If your bench also handles phone boards, pair it with eMMC programmers, ISP pinout tools and UFS adapters from Mechanicpk, and browse the reballing kits category for phone chip stencils. Pick SSD2 when your queue includes DDR4 or DDR5 memory on SSD boards, or NAND in BGA154 and BGA178. Pick SSD1 or SSD3 when the controller markings above match the drive on your bench. Matching the stencil to the package code saves you a failed reball and a second reflow.
| Weight | 0.1 kg |
|---|
Key Features
- ✓0.25mm stencil thickness
- ✓Ultra-hard steel construction from Amaoe's Super Hard series
- ✓Precision-cut square holes for even ball placement
- ✓Reusable template for repeated jobs
- ✓DDR4 BGA78 and BGA96 plus DDR5 BGA82 and BGA102 layouts
- ✓Six NAND layouts: BGA132, BGA152, BGA154, BGA178, BGA272, BGA316
- ✓1620 SSD controller layout in BGA291
- ✓Built for professional IC repair benches
Specifications
| Brand | Amaoe |
|---|---|
| Model | SSD:2 (SSD2) |
| Category | BGA Reballing Stencil |
| Compatibility | SSD NAND flash, DDR4/DDR5 memory and SSD controller BGA packages |
| Supported Devices | SSD NAND, DDR memory and one SSD controller package (package-level, not phone-model specific) |
| Technology | BGA stencil reballing, precision-cut square-hole mesh |
| Material | Ultra-hard steel (Super Hard series) |
| Thickness | 0.25mm |
| Hole Type | Square |
| Reusable | Yes |
Common Repair Uses
- ✓Chip-level reballing on SSD boards
- ✓Reballing SSD NAND flash chips after removal
- ✓Reballing DDR4 memory chips from SSD boards
- ✓Reballing DDR5 memory chips from SSD boards
- ✓Restoring solder balls on the 1620 SSD BGA291 controller
- ✓Preparing donor NAND chips before transplanting them onto a repaired board
- ✓Reworking dead SSD boards with a hardware fault at memory or NAND level
- ✓Running repeat reballing jobs on a repair bench with one reusable steel template
- ✓Practicing fine-pitch BGA reballing in technician training sessions
Compatible Devices
- ✓SSD NAND flash, DDR4/DDR5 memory and SSD controller BGA packages (package-level compatibility, not phone-model specific)
- ✓DDR4 BGA78 memory chips
- ✓DDR4 BGA96 memory chips
- ✓DDR5 BGA82 memory chips
- ✓DDR5 BGA102 memory chips
- ✓NAND BGA132 and BGA152 flash chips
- ✓NAND BGA154 and BGA178 flash chips
- ✓NAND BGA272 and BGA316 flash chips
- ✓1620 SSD controller, BGA291
FAQ
What is the product name?
What is the brand of this product?
What is the model of this product?
What is this product used for?
Which devices are compatible with this product?
Who should use this product?
Which NAND packages does the Amaoe SSD2 stencil support?
How thick is the Amaoe SSD2 stencil, and how does it differ from SSD1 and SSD3?
Related products
Qianli 011 16-in-1 Glue Removal Knife for Mobile Repair
Out of stock



