1618A0 U2 Charging IC for iPhone 14 Series
₨ 600
1618A0 U2 Tristar IC for iPhone 14 Charging Faults
The 1618A0 is the U2 Tristar charging IC used on the iPhone 14, iPhone 14 Plus, iPhone 14 Pro, and iPhone 14 Pro Max. It manages charging and USB communication on the logic board. You replace it when an iPhone 14 stops charging, ignores the cable, or charges only intermittently after you have ruled out the port, flex, and battery. The part is specific to the iPhone 14 generation. Do not fit it to iPhone 13 or iPhone 15 boards, which use different U2 chips. Mechanicpk stocks it for Pakistani repair shops that handle charging issue jobs on newer iPhones.
1618A0 Charging IC for iPhone 14 Series: U2 Tristar Replacement
The 1618A0 charging IC for iPhone 14 is the U2 Tristar chip that manages charging and USB communication on iPhone 14, iPhone 14 Plus, iPhone 14 Pro, and iPhone 14 Pro Max logic boards. When this chip fails, the phone stops accepting charge, ignores the cable, or charges only intermittently, and swapping cables or ports changes nothing. You replace the IC on the board, and this listing gives you the exact part for that job. The iPhone 14 generation sits between the 1616A0 used on iPhone 13 and the SN2012027 used on iPhone 15 and 16, so match the marking before you order.
What the 1618A0 does on an iPhone 14 board
The U2 Tristar controls how power enters the phone through the Lightning port and handles the USB data conversation between the phone and the charger or computer. A failed U2 shows up as a dead phone on charge, charging only while the phone is off, slow charging, battery drain in standby, or a device that the computer and iTunes never detect.
Diagnose before you commit to an IC change karna job. Watch the current draw on a DC power supply, check the charging port and flex, and measure the main charging lines with a multimeter. If the port and flex are clean and the readings point at the U2 area, the 1618A0 is your replacement. A U2 tester that reads the chip status confirms the fault faster than guessing.
Matching the iPhone 14 U2 Tristar IC to your board
Apple changes the U2 Tristar marking across generations, and a wrong match wastes a board. Supplier listings map the generations like this: 1610A2 for iPhone 6, 1610A3 for iPhone 6S, 610A3B for iPhone 7, 1612A1 for iPhone 8 through iPhone 11, 1614A1 for iPhone 12, 1616A0 for iPhone 13, 1618A0 for iPhone 14, and SN2012027 for iPhone 15 and 16.
The 1618A0 covers the iPhone 14, 14 Plus, 14 Pro, and 14 Pro Max. Read the marking on the chip you remove and confirm it against this part before you solder the new one. If you work on several generations, keep each U2 variant in its own labelled tray so you never mix them on a busy bench.
Replacing the IC on your repair bench
You need a hot air station, a microscope, flux, and clean pads. Remove the damaged IC under magnification, clean the pads without lifting them, and seat the new 1618A0 in the correct orientation. Reflow it evenly, let the board cool, and power it from your DC supply before you close the phone.
Test every job in stages. Check the supply current on first power, then connect a charger and confirm the phone takes charge. Connect it to a computer and confirm it appears there. A board that passes all three checks is ready for reassembly. If the fault persists, move your diagnosis to the power IC and the battery connector area, because a charging fault does not always end at the U2.
Stock the 1618A0 alongside your other charging ICs and a reballing kit, and your iPhone 14 charging jobs stay on your bench instead of going to another shop.
| Weight | 0.1 kg |
|---|
Key Features
- ✓U2 Tristar charging IC marked 1618A0
- ✓Matches the iPhone 14 generation
- ✓Covers iPhone 14, 14 Plus, 14 Pro, and 14 Pro Max
- ✓Replaces a failed charging and USB control chip
- ✓Fixes charging issue faults once port, flex, and battery check out
- ✓Suits hot air rework under a microscope
- ✓Pairs with a U2 tester for chip status checks
- ✓Supports a repeatable charging repair workflow for your repair shop
Specifications
| Model | 1618A0 |
|---|---|
| Category | iPhone USB charging IC (U2 Tristar) |
| Compatibility | iPhone 14, iPhone 14 Plus, iPhone 14 Pro, iPhone 14 Pro Max |
Common Repair Uses
- ✓Charging-fault workflows on iPhone 14 series boards
- ✓iPhone 14 not charging after port and flex checks pass
- ✓Phone charges only when switched off
- ✓Slow charging with a known-good cable and adapter
- ✓Phone not detected by a computer or iTunes
- ✓Dead phone on charge with abnormal current on the DC power supply
- ✓Battery draining in standby with the U2 area under suspicion
- ✓Replacing a U2 IC after liquid damage near the charging port
- ✓Replacing a U2 IC that a faulty third-party charger damaged
Compatible Devices
- ✓Verified scope: iPhone 14 generation only
- ✓iPhone 14
- ✓iPhone 14 Plus
- ✓iPhone 14 Pro
- ✓iPhone 14 Pro Max
FAQ
What is the product name?
What is the model of this product?
What is this product used for?
Which devices are compatible with this product?
Who should use this product?
Can I use the 1618A0 on an iPhone 13 or iPhone 15?
Which faults point to a bad U2 IC on an iPhone 14?
Related products
358S IC T211 Samsung Tab Charging IC – Tab 3 USB Charger IC
In stock



