2UUL BL01 MicroFix Underfill Removal Hook Blades 4pcs
₨ 1,200
Hook Blades for Mobile Phone Underfill Removal
The 2UUL BL01 MicroFix set gives you four forged alloy steel hook blades for underfill removal on mobile phone motherboards. The curved hook tip reaches tight gaps between components, so you clear black glue and cold glue around CPU and NAND chips without forcing a flat blade into the space. Use the blades for oxidation scraping, solder residue removal, delicate sanding on IC surfaces and PCB pad cleaning. Mechanicpk stocks the 2UUL BL01 for Pakistani repair shops and technicians who want a precise glue-clearing tool for chip-level jobs, from dead phone diagnosis to IC change karna.
In stock
Underfill Removal Hook Blades for Mobile Phone Board Repair
The 2UUL BL01 MicroFix set puts four underfill removal hook blades on your bench for one specific job: clearing hardened glue from mobile phone motherboards before you lift or clean a chip. Each blade ends in a curved hook tip that reaches gaps a straight scalpel cannot enter. 2UUL forges the blades from treated alloy steel, a material choice that balances a hard scraping edge against enough ductility to resist snapping under pressure. If your repair work includes CPU, NAND flash or other BGA components, this set covers the manual glue-clearing step between heating the board and lifting the IC.
Hook Tip Geometry and Forged Alloy Steel Build
The hook tip separates BL01 from flat pry blades. A flat edge slides across the board and pushes glue sideways. A curved hook catches the cured edge of the underfill and pulls it out in short, controlled strokes, which keeps pressure low around neighbouring components. Supplier information says the edges remove black glue and cold glue, and that the design limits scratches on solder mask and damage to copper pads. You still decide that outcome with your blade angle and pressure, so treat each blade as a precision scraper, never as a lever. Four blades in one set let you rotate to a fresh edge when you work through several boards in a session.
Where BL01 Fits in Your Underfill Removal Workflow
Glue removal sits in the middle of most chip-level jobs. You start by locking the board into PCB holders and bringing the work area under a microscope. Hot air stations or a preheater soften the underfill, and then you run the hook blade along the chip edge to clear the perimeter glue. Once the IC lifts, the same blades scrape leftover residue off the pads, which leaves the board ready for soldering station work or a reballing kit. A multimeter check on the cleaned pads confirms you kept every trace intact before you place the new chip.
Heat control decides how much effort the blade needs. Underfill that has not softened fights the hook and tempts you to push harder, which is how pads lift. Warm the area evenly, test the glue with the tip, and pause to reheat when the strokes start to drag. Wipe the blade between passes so cured fragments do not scratch the board on the next stroke. Short, patient strokes along the chip edge clear more glue than one deep dig.
NAND and eMMC jobs add more steps after glue removal. ISP pinout tools, eMMC programmers, UFS adapters and test boxes all depend on a clean, flat pad area, so careful work at the glue stage saves you repeat reballing later. Treat the underfill step as part of the programming workflow, not a separate chore.
Real Repair Jobs This Set Handles
Technicians in Pakistan reach for glue-removal blades whenever a hardware fault points at the CPU or NAND. A dead phone with a suspected storage fault, a handset that hangs on logo, or a board that needs IC change karna all start with the same step: clear the underfill without scarring the board. BL01 targets exactly that step. The listing describes uses that include cleaning CPUs and NAND chips, scraping oxidation, removing solder residue, delicate manual sanding on IC surfaces and cleaning PCB pads. Work slowly, keep the blade angle shallow, and check progress under magnification so you remove glue and leave the copper alone.
Repair shops, service centers and training institutes benefit most from a set like this. A shop that already owns flat pry blades adds BL01 as the specialist tool for stubborn perimeter glue and tight gaps. A technician who still uses a generic scalpel for underfill gains a purpose-shaped hook and a four-blade supply in one order. Mechanicpk supplies the 2UUL BL01 to Pakistani workshops that run hot air rework, microscope inspection and BGA repair every day and want a dependable consumable for the glue-clearing stage.
| Weight | 0.10 kg |
|---|
Key Features
- ✓Curved hook tip reaches tight gaps between components
- ✓Forged from treated alloy steel for a hard edge with ductility
- ✓Edges remove black glue and cold glue
- ✓Design limits scratching of solder mask and damage to copper pads
- ✓Four blades per set for edge rotation across multiple boards
- ✓Cleans CPU and NAND chip surfaces
- ✓Scrapes oxidation and removes solder residue
- ✓Supports delicate manual sanding on IC surfaces
Specifications
| Brand | 2UUL |
|---|---|
| Model | BL01 MicroFix |
| Category | Prying & Cutting Tools (Repair Tools > Hand Tools) |
| Compatibility | Universal — not device-specific |
| Material | Forged treated alloy steel |
| Quantity | 4 blades per set |
Common Repair Uses
- ✓Glue clearing and board cleaning during chip-level mobile repair
- ✓Removing hardened underfill from phone motherboards
- ✓Clearing black glue around ICs
- ✓Clearing cold glue around components
- ✓Cleaning CPU chips
- ✓Cleaning NAND chips
- ✓Scraping oxidation from board surfaces
- ✓Removing solder residue
- ✓Delicate manual sanding on IC surfaces and cleaning PCB pads
Compatible Devices
- ✓Universal — not device-specific; works on mobile phone motherboards where underfill or glue sits around components
- ✓Mobile phone motherboards (general)
- ✓CPU chips sealed with underfill
- ✓NAND flash chips sealed with underfill
- ✓IC surfaces under cured glue
- ✓PCB pads after chip removal
- ✓Tight gaps between SMD components
FAQ
What is the product name?
What is the brand of this product?
What is the model of this product?
What is this product used for?
Which devices are compatible with this product?
Who should use this product?
Can BL01 hook blades remove black glue and cold glue from a phone board?
Which chips can I clean with the 2UUL BL01 hook blade set?
Related products
QIANLI 008 Cutting Knife Blade for BGA Underfill Removal
Out of stock
UFI eMMC BGA Soldering Adapter (8 Footprints) for UFI-Box
In stock



