Qualcomm WCD9326 Audio IC for Redmi Note 3 Pro & Mi Max
₨ 350
Qualcomm WCD9326 Audio IC for Board-Level Sound Repair
The WCD9326 audio IC is the Qualcomm codec chip that runs speaker, earpiece, microphone, and headphone signal conversion on Snapdragon 650 and 652 handsets such as the Xiaomi Redmi Note 3 Pro, Xiaomi Mi Max, and Samsung Galaxy A9 2016. When the codec fails, the phone loses its sound paths and no firmware flash restores them. You get a bare replacement IC for direct chip-level work, so you skip the cost of a donor board and finish the job on your own bench. It suits technicians who already handle hot air rework and BGA-style IC change karna on Qualcomm boards.
WCD9326 Audio IC: Qualcomm Codec for Snapdragon 650 and 652 Boards
The WCD9326 audio IC is the Qualcomm audio codec that handles every analog sound signal on a range of Snapdragon 650 and 652 handsets, including the Xiaomi Redmi Note 3 Pro, Xiaomi Mi Max, and Samsung Galaxy A9 2016 (SM-A9000). It belongs to Qualcomm’s WCD93xx codec line, the family of standalone audio chips that pair with Snapdragon application processors. When this chip fails, the phone loses its earpiece, microphone, headphone, or speaker paths, alone or all together, and no software flash brings them back. Mechanicpk supplies the WCD9326 as a bare IC for technicians who diagnose audio faults down to chip level and want a direct part instead of a full board swap.
What the Qualcomm WCD9326 Codec Does on the Board
The Snapdragon SoC processes audio digitally, but microphones, earpieces, and headphones work in the analog domain. The Qualcomm WCD9326 codec bridges that gap. Its DAC stages turn the digital stream into analog output for the earpiece, the headphone jack, and the speaker path. Its ADC stages digitize the microphone signals for calls, voice notes, and video recording. The codec also supplies microphone bias voltage and reads the headset detection lines, so a failing chip can stop the phone from recognizing wired earphones at all. Because one IC controls this many paths, a single codec fault produces symptoms that look like several separate hardware faults at once.
Diagnosing a WCD9326 Fault Before IC Change Karna
Start by ruling out software. Run a clean firmware flash and test audio before you open the phone, since a corrupted audio configuration can mimic a hardware fault. If the problem survives the flash, swap the speaker, earpiece, and microphone flex with known-good parts. When every transducer tests fine and sound still fails across multiple paths, the codec becomes the prime suspect. Use a multimeter to check microphone bias at the mic pads and confirm the supply rails on the codec’s decoupling capacitors. Inspect the area under the shield with a microscope; water damage often leaves corrosion around the codec balls. On drop-damaged phones, a reflow sometimes restores cracked joints, so try it before you commit to a full replacement.
Replacing the WCD9326 Audio IC on Your Repair Bench
Secure the board in a PCB holder and remove the shield over the codec. Preheat the board evenly, apply good-quality flux, and lift the old IC with your hot air station at a controlled temperature and airflow so you protect nearby components. Clean the pads flat with solder wick and a fine soldering iron tip, then inspect every pad under magnification. If a pad has lifted, jumper lagana with fine wire to the correct trace before you mount the new chip. If the replacement IC needs fresh balls, use a matching stencil from your reballing kit. Align the WCD9326 by its pin-1 marking, reflow it, and let the board cool naturally. Test every path before reassembly: speaker, earpiece, both microphones, headphone detection, and call audio in both directions.
Tools That Complete the Redmi Note 3 Pro Audio IC Workflow
A clean Redmi Note 3 Pro audio IC job depends on the tools around the chip. A stable hot air station and a temperature-controlled soldering station handle removal and pad preparation. A PCB holder keeps the board flat under heat, and a reballing kit covers ball renewal. A digital multimeter confirms rails and bias before and after the swap. If your shop handles IC-level audio and power repairs every day, a higher-magnification stereo microscope speeds up pad inspection and alignment on Qualcomm boards.
| Weight | 0.1 kg |
|---|
Key Features
- ✓Genuine Qualcomm WCD93xx-family codec part number, WCD9326
- ✓Covers DAC playback paths for earpiece, headphone, and speaker output
- ✓Covers ADC capture paths for primary and secondary microphones
- ✓Supplies microphone bias and drives headset detection
- ✓Direct chip-level fix that avoids a full motherboard replacement
- ✓Matches Snapdragon 650 and 652 era Xiaomi and Samsung boards
- ✓Suits hot air rework and reballing workflows
- ✓Bare IC format for professional board-level technicians
Specifications
| Brand | Qualcomm |
|---|---|
| Model | WCD9326 |
| Category | Mobile Phone ICs > Audio ICs |
| Compatibility | Snapdragon 650 (MSM8956) and Snapdragon 652 (MSM8976) handsets built with the WCD9326 codec |
| Supported Devices | Xiaomi Redmi Note 3 Pro, Xiaomi Mi Max, Samsung Galaxy A9 2016 (SM-A9000) |
| Technology | Qualcomm WCD93xx-series audio codec IC |
Common Repair Uses
- ✓No sound from speaker and earpiece after a firmware flash fails to fix it
- ✓Microphone dead in calls and recordings with a known-good mic installed
- ✓Wired headphones not detected or no headphone audio
- ✓Distorted or crackling audio traced to the codec, not the transducers
- ✓Water-damaged boards with corrosion around the audio IC
- ✓Drop-damaged boards where reflow does not restore audio
- ✓Replacing a codec damaged by a short on the headphone jack lines
- ✓Restoring audio on boards after previous failed rework
Compatible Devices
- ✓Verified device-level and platform-level scope
- ✓Xiaomi Redmi Note 3 Pro (Snapdragon 650 variant, not the MediaTek Redmi Note 3)
- ✓Xiaomi Mi Max
- ✓Samsung Galaxy A9 2016 (SM-A9000)
- ✓Snapdragon 650 (MSM8956) boards that carry the WCD9326 codec
- ✓Snapdragon 652 (MSM8976) boards that carry the WCD9326 codec
FAQ
What is the product name?
What is the brand of this product?
What is the model of this product?
What is this product used for?
Which devices are compatible with this product?
Who should use this product?
Does the WCD9326 fit the MediaTek Redmi Note 3?
How do I confirm the WCD9326 is faulty and not the speaker or mic?
Related products
339S0223 For iPad 5/Air1 A1474 Wifi IC – U5800 WiFi Module
In stock
A3B U2 610A3B Charging Power IC iPhone 7,7+ Tristar U4001
In stock



