YCS 0.04mm Copper Jumper Wire – 100m PCB Flying Wire

Original price was: ₨ 900.Current price is: ₨ 700.

Ultra-Fine Copper Flying Wire for Motherboard Repair

The YCS 0.04mm Copper Jumper Wire gives you a 100 m supply of ultra-fine copper conductor for rebuilding broken traces and lifted pads on mobile phone motherboards. YCS positions it as a pad flying wire, and it suits precision PCB and CPU soldering repair where standard wire is too thick. The wire is non-magnetic, tins easily, and carries low solder resistance, so your joints stay clean under the microscope. Mechanicpk supplies it to repair shops and technicians across Pakistan who need dependable micro-soldering consumables for daily board-level work.

In stock

12 People watching this product now!
Description

YCS 0.04mm Copper Jumper Wire for Precision Trace and Pad Repair

The YCS 0.04mm Copper Jumper Wire gives your bench an ultra-fine flying wire for restoring broken connections on mobile phone motherboards. YCS supplies it as a pad flying wire, a PCB flying wire cut from a 100 m length of 0.04 mm copper conductor. You reach for it when a trace burns out, a pad lifts after a hot air session, or a BGA connection needs a bridge that no ordinary wire can fit. At this diameter, the wire routes between tiny pads without crowding neighboring components, which matters on dense smartphone boards.

Material and Electrical Characteristics

YCS builds this wire from copper and lists electrical conductivity, thermal conductivity, and corrosion resistance as its core properties, so the wire resists rust during storage on your bench. The manufacturer also describes low inductance, high anti-interference behavior, and low solder resistance, three traits that keep a repaired signal or power line behaving like the original trace. Good plastic ductility and high elongation let you bend and stretch the wire into position without it snapping, and the tight conductor structure holds together with no breakpoints along the length. The wire is non-magnetic and tins easily, so your joint forms quickly and your iron spends less time on a fragile pad. Thermal conductivity also helps here: heat moves through the wire into the joint, so you can tack each end with a controlled iron temperature instead of pushing the pad to hold the connection. That combination makes the YCS 0.04mm copper jumper wire a practical pick for repairs where pad strength is already marginal. Because the wire stays tough along its full length, you cut clean lengths to suit each repair and keep the rest of the 100 m supply usable for later jobs.

Where It Fits in a Board-Level Repair Workflow

Every jumper job starts with diagnosis. You trace the fault with a multimeter, confirm the open line under a microscope, and clean the damaged area back to healthy copper. Then you tin the pad, solder one end of the wire, route it along the original path, and finish the second joint with your soldering station. A PCB holder keeps the board steady while you work, and a hot air station helps when a nearby component needs lifting first.
This workflow solves the faults that Pakistani technicians see every day. A broken charging line behind a damaged connector causes a charging issue, a torn pad under a display connector causes a display problem, and a lifted pad after an IC removal leaves a dead phone until you restore the connection. On boards that need reballing, the wire repairs a lost pad or trace so the new chip has something to land on. Pair the wire with ISP pinout tools, eMMC programmers, UFS adapters, and test boxes when a dead phone needs both a hardware fix and a software step afterward.

Why Technicians Pick the 0.04mm Copper Option

YCS sells this wire alongside a thinner 0.02mm silver version, and the two serve different habits at the bench. The 0.04mm copper wire is the thicker option, which makes it easier to handle, tin, and position when you do not need the finest possible pitch. A 100 m length covers a long run of repairs, so a workshop or service center does not stop mid-job for consumables. With a gross weight of 27 g, the wire also ships economically to repair shops outside the big city markets.
When you compare jumper wire options for mobile repair in Pakistan, check the diameter first, then confirm the wire tins cleanly with your usual solder and flux. This YCS wire meets that test for technicians who want a predictable, non-magnetic conductor for daily trace and pad repair. Stock it next to your reballing kits, flux, and microscope accessories and your bench stays ready for the next hardware fault. Pakistani repair shops that handle high board volume benefit most, because a single 100 m length of mobile motherboard jumper wire serves hundreds of small repairs before you need to reorder.

Additional information
Weight0.27 kg
Q & A
Please login to post questions

Key Features

  • 0.04mm ultra-fine copper conductor for precision pad and trace work
  • 100 m length for long-term workshop use
  • Non-magnetic wire
  • Tins easily for fast, clean solder joints
  • Low solder resistance and low inductance
  • High anti-interference performance
  • Good plastic ductility and high elongation, so the wire bends without snapping
  • Corrosion resistant and rust resistant, with electrical and thermal conductivity

Specifications

BrandYCS
Model0.04mm Copper Jumper Wire (Pad Flying Wire)
CategoryJumper Wire / Soldering Consumables
CompatibilityUniversal — not device-specific
MaterialCopper
Diameter0.04mm
Length100m
Weight27g (gross)

Common Repair Uses

  • Board-level jumper work on mobile phone motherboards
  • Restoring broken or burned PCB traces
  • Rebuilding lifted pads after IC or connector removal
  • Bridging damaged pads in CPU and BGA rework
  • Repairing charging line breaks that cause charging issues
  • Repairing display connector pads on boards with display problems
  • Creating flying wire connections between test points and pads
  • Fixing damaged pads on dead phone motherboards
  • Micro-soldering jumper modifications on PCBs

Compatible Devices

  • Universal jumper wire — not device-specific; works on any mobile phone motherboard where you can solder to the pad or trace
  • Android smartphone motherboards (Samsung, Oppo, Vivo, Infinix, Tecno and other brands)
  • iPhone logic boards
  • Feature phone motherboards
  • Tablet motherboards
  • Mobile phone CPU and BGA pad areas
  • Charging port and connector pads on phone boards
  • Display connector pads on phone boards
  • General PCB trace and pad repair on other small electronics

FAQ

What is the product name?
The product name is YCS 0.04mm Copper Jumper Wire.
What is the brand of this product?
The brand of this product is YCS.
What is the model of this product?
The model is the YCS 0.04mm Copper Jumper Wire, also called the 0.04mm copper pad flying wire.
What is this product used for?
This product repairs broken traces and lifted pads on mobile phone motherboards through precision jumper soldering.
Which devices are compatible with this product?
This is a universal jumper wire. It works on any mobile phone motherboard where you can solder to the pad or trace.
Who should use this product?
This product is suitable for mobile repair technicians, repair shops, service centers, and professional users.
What is the difference between YCS 0.04mm copper wire and the 0.02mm silver wire?
YCS sells both as pad flying wire. The 0.04mm copper wire is the thicker option, while the 0.02mm silver wire is the thinner one.
Is YCS 0.04mm copper jumper wire magnetic, and does it tin easily?
The wire is non-magnetic and tins easily, which helps you form clean solder joints on small pads.