YCS 150°50g BGA Solder Reballing Past Low Temp
₨ 1,200
150℃ Low Temperature BGA Reballing Paste
YCS 150°50g BGA Solder Reballing Past gives your bench a 150℃ low temperature solder paste in a 50g jar. It targets BGA, IC, CPU and PCB soldering on mobile phone logic boards, including heat-sensitive ICs, flex cables and multilayer boards. The lower melting point lets you reflow with less thermal stress than a hotter paste, which matters when you reball an eMMC, PMIC or CPU on a crowded board. Use this BGA solder reballing paste for stencil reballing, IC reinstallation, pad repair and tin planting. Technicians in Pakistan can stock one jar for daily chip-level work.
In stock
BGA Solder Reballing Paste for Mobile Logic Board Repair
YCS 150°50g BGA Solder Reballing Past is a 150℃ low temperature BGA solder reballing paste from YCS, packed in a 50g jar for daily workshop use. You apply it to pads and stencil apertures when you reball BGA chips, reseat ICs and rebuild damaged pads on mobile phone motherboards. The 150℃ melting point sits below the 183℃, 199℃ and 215℃ pastes in the same YCS range. Your hot air station spends less time at aggressive heat when you work near flex connectors, memory chips and multilayer boards. Mechanicpk stocks it for technicians who want a predictable low-heat paste for chip-level repair.
Why Low Temperature Solder Paste for Mobile Repair Protects the Board
Heat decides whether a rework job succeeds or ruins the board. Every extra degree and every extra second on a dead phone board adds stress to pads, inner layers and neighbouring components. A low temperature paste narrows that risk because it melts earlier, so you finish the joint before surrounding parts take a full thermal hit. YCS positions this 150℃ grade for heat-sensitive ICs, flex cables and multilayer mobile logic boards. Those are the boards that reach your bench with a hardware fault, a charging issue, a display problem or a boot loop. Keep your hot air profile low and steady, and let the paste do the work instead of forcing the joint with extra temperature.
How to Use This BGA Solder Reballing Paste on Your Bench
Reballing with this paste follows a short sequence. Clean the pads first: pull the old solder with braid, then wipe the board and chip with a suitable cleaner until the surface is bright and flat. Seat the BGA chip in a matching stencil, apply a thin even layer of paste across the apertures, and press it in with a flat blade so every aperture fills without bridging. Heat the stencil area with your hot air station until the paste melts into balls, then let it cool before you lift the stencil off the chip. Keep the airflow gentle so the stencil stays put, and inspect the result under a microscope before you place the chip back on the board. One 50g jar covers many reballing jobs, so you can keep it at hand for eMMC, PMIC and CPU work.
Where It Fits in Your Repair Workflow
On a repair bench, this paste sits between diagnosis and final testing. You confirm the fault with a multimeter or test box, lift the chip with a hot air station, and clean the pads. Then you reball or rebuild the pads with this paste and a stencil from your reballing kit, while a PCB holder keeps the board steady under the microscope. For eMMC and UFS jobs, you follow the reball with ISP pinout or programmer testing to confirm the chip reads and the phone no longer sits dead or hangs on logo. Your soldering station handles the surrounding passives, and this paste handles the BGA joints. If a job calls for a higher melting point, YCS also lists 183℃, 199℃ and 215℃ grades in the same 50g size, so you can step up within one brand as your rework profile changes.
| Weight | 0.50 kg |
|---|
Key Features
- ✓150℃ melting point for low-heat reflow
- ✓50g jar sized for daily professional bench use
- ✓Suits BGA, IC, CPU and PCB precision soldering
- ✓Made for heat-sensitive ICs, flex cables and multilayer logic boards
- ✓Smooth application for fine-pitch and small components
- ✓YCS formulation aimed at consistent, clean low-heat joints
- ✓Works with stencil reballing and hot air rework
- ✓Part of a YCS range that also includes 138℃, 183℃, 199℃ and 215℃ grades
Specifications
| Brand | YCS |
|---|---|
| Category | Low Temperature Solder Paste |
| Compatibility | BGA, IC, CPU and PCB soldering repair |
| Supported Devices | Mobile phone logic boards (general application, not device-specific) |
| Technology | Low temperature solder paste, 150℃ melting point |
| Weight | 50g |
Common Repair Uses
- ✓Chip-level soldering on mobile boards, from reballing to pad rebuilds.
- ✓BGA reballing through a stencil
- ✓IC reinstallation after removal
- ✓CPU tin planting
- ✓Pad repair on damaged logic boards
- ✓Microsoldering on fine-pitch components
- ✓Reflow of heat-sensitive ICs
- ✓Flex cable soldering repair
- ✓Multilayer logic board rework
Compatible Devices
- ✓Universal mobile phone logic boards and PCBs. The paste is not device-specific.
- ✓Mobile phone motherboards (all brands, general application)
- ✓Multilayer mobile logic boards
- ✓Heat-sensitive ICs
- ✓BGA chips
- ✓CPU chips
- ✓Flex cables
- ✓Fine-pitch and small electronic components
- ✓PCB pads and solder pads
FAQ
What is the product name?
What is the brand of this product?
What is the model of this product?
What is this product used for?
Which devices are compatible with this product?
Who should use this product?
What is the melting point of this YCS solder paste?
Can I use this paste to reball heat-sensitive ICs on mobile boards?
Related products
JZQ-599B Soldering Iron Tip Cleaner with Tin Cleaning Ball
Out of stock
UFI eMMC BGA Soldering Adapter (8 Footprints) for UFI-Box
In stock



