YCS 150°50g Soldering Pasta Black Bottle – Low Temp

₨ 1,100

YCS 150℃ Low Temp Solder Paste

The YCS 150°50g Soldering Pasta Black Bottle is a low temperature solder paste with a 150℃ melting point, packed in a 50g black bottle for daily workshop use. You get controlled reflow for heat-sensitive ICs, flex cables and multilayer mobile logic boards, with smooth application on fine-pitch components during IC installation, pad repair and BGA work. YCS builds the paste for BGA, IC, CPU and PCB precision soldering, so it fits dead phone and hardware fault repairs where a standard solder temperature puts the board at risk. Order it for your repair bench at Mechanicpk.

In stock

11 People watching this product now!
Description

Low Temperature Solder Paste for Mobile Repair at 150℃

The YCS 150°50g Soldering Pasta Black Bottle gives your bench a low temperature solder paste for mobile repair that melts at 150℃. That melting point sits below the heat standard solder demands, so you protect the board, the flex cable and the neighbouring ICs while you place or reflow a part. YCS packs the paste in a 50g black bottle that suits daily professional use. Technicians in Pakistan reach for it during IC installation, pad repair and BGA work on dead phones and boards with a hardware fault.

Why a 150℃ Melting Point Matters on a Logic Board

Modern mobile logic boards stack many layers and place heat-sensitive ICs close together. Every extra degree of reflow temperature raises the risk of lifted pads, damaged flex connectors and neighbouring components that shift or fail. A 150℃ paste lets you work with lower heat, which cuts thermal stress during microsoldering and IC installation. You keep your hot air station and soldering station settings gentler, and you leave less margin for error on boards that already carry damage. This grade suits repairs where the board is valuable, the layout is dense and one overheated corner turns a repairable phone into scrap.

Paste Behaviour, Application and Bench Fit

You apply the paste to pads for precise placement on fine-pitch and small components. YCS positions the range for BGA, IC, CPU and PCB precision soldering, and describes it with strong wettability and anti-oxidation performance, which helps joints form cleanly on tinned pads. A black 50g bottle keeps the material compact on a crowded bench. Pair it with a microscope for pad inspection, a PCB holder to keep the board steady, and a reballing kit with the right stencil when you rebuild BGA joints. Wipe and check the pad before every application so the paste sits flat and the joint forms evenly.

Where It Fits in Your Repair Workflow

Board-level repair starts with diagnosis. You measure with a multimeter, read the fault with a test box, and use ISP pinout tools, eMMC programmers or UFS adapters when memory or storage causes the failure. Once diagnosis points to a failed IC, a damaged pad or a lifted ball, the soldering stage begins, and this paste handles the rework step. Typical jobs include a charging issue traced to a charging IC, a display problem linked to a damaged connector area, a hang on logo case after memory work, and a dead phone that needs a CPU or IC reseated. The paste does not fix the fault by itself. It gives you a controlled, low-heat joint once you identify the failing part.

Choosing the Right Grade in the YCS Range

YCS sells the same 50g paste in several temperature grades: 138℃, 150℃, 183℃, 199℃ and 215℃. The 150℃ grade sits in the low temperature group, a practical step up from 138℃ when you want low-heat soldering with a slightly higher working margin. Keep one low temperature bottle for delicate boards and a higher grade for robust work, and label each bottle so you never mix grades on one pad. Mechanicpk also stocks the hot air stations, soldering stations, microscopes, reballing kits and PCB holders that complete the rework setup around this paste.

Additional information
Weight0.50 kg
Q & A
Please login to post questions

Key Features

  • IC installation after IC replacement
  • BGA tin planting and reballing
  • CPU and SoC rework on dead phones
  • Pad repair on lifted or damaged pads
  • Microsoldering on fine-pitch components
  • Flex cable and connector area soldering
  • Multilayer logic board repair
  • Low-heat reflow of heat-sensitive components

Specifications

Brand EntityYCS
Product EntityYCS 150℃ low temperature solder paste, 50g black bottle
Technology EntityLow temperature solder paste, BGA and IC reflow soldering
Compatible Device EntitiesMobile phone PCB logic boards, BGA ICs, CPU packages, flex cables
Repair Process EntityMicrosoldering, IC installation, pad repair, BGA tin planting and reballing
Industry EntityMobile repair, GSM hardware repair, PCB rework

Common Repair Uses

  • Universal solder paste, not device-specific. It works on mobile phone PCB logic boards and the component types below.
  • Mobile phone PCB logic boards
  • BGA ICs
  • CPU and SoC packages
  • Fine-pitch components
  • Multilayer logic boards
  • Flex cables
  • Heat-sensitive ICs
  • Pad repair sites

Compatible Devices

  • 150℃ melting point for controlled, low-heat reflow
  • Suits heat-sensitive ICs, flex cables and multilayer mobile logic boards
  • Cuts overheating risk during microsoldering and IC installation
  • Applies smoothly for precise placement on fine-pitch components
  • YCS range built for BGA, IC, CPU and PCB precision soldering
  • Strong wettability and anti-oxidation performance across the YCS range
  • 50g black bottle for daily professional bench use
  • Part of a five-grade YCS range (138℃ to 215℃) for different board needs

FAQ

What is the product name?
The product name is YCS 150°50g Soldering Pasta Black Bottle.
What is the brand of this product?
The brand of this product is YCS.
What is the model of this product?
The model is the YCS 150℃ low temperature solder paste in a 50g bottle.
What is this product used for?
This product is used for low-heat soldering of ICs, BGA components, CPUs and fine-pitch parts on mobile phone PCBs.
Which devices are compatible with this product?
This product is a universal solder paste for mobile phone PCB logic boards and is not limited to specific phone models.
Who should use this product?
This product is suitable for mobile repair technicians, repair shops, service centers, and professional users.
What is the melting point of this YCS solder paste, and why does it matter for IC work?
The melting point is 150℃. This low-temperature grade lets you reflow and install ICs with less heat, which lowers the risk of damaging heat-sensitive components, flex cables and multilayer boards.
Can I use this paste for BGA and CPU rework on mobile phone boards?
Yes. YCS positions its solder paste range for BGA, IC, CPU and PCB precision soldering, and the 150℃ grade suits low-heat rework on mobile logic boards.