YCS 4 in 1 Solder Paste Set 138/183/199°C for BGA Reballing

₨ 3,500

YCS 4 in 1 Solder Paste Set for BGA Reballing

The YCS 4 in 1 solder paste set covers three melting points in one package: 138°C low temperature, 183°C medium temperature and 199°C high temperature, each in a 50g pack, plus a YCS 2015 desolder wick. You pick the grade that fits the chip and the board, from heat-sensitive ICs to CPU bonding work. The paste suits BGA, CPU, SMD and PCB repair on mobile phone and tablet logic boards. It gives repair shops and GSM technicians in Pakistan one stocked set for daily reballing, pad rebuilding and IC change jobs, with portable packs that fit any workshop bench.

In stock

12 People watching this product now!
Description

YCS Solder Paste for BGA Reballing: Three Melting Points in One Set

The YCS solder paste for BGA reballing set puts three 50g pastes on your bench at 138°C, 183°C and 199°C, plus a YCS 2015 desolder wick. You match the melting point to the chip and the board instead of forcing every job through a single paste. Mechanicpk supplies this set to Pakistani repair shops that tin BGA CPUs, lift stubborn ICs and rebuild pads on mobile motherboards every day. The pastes target BGA, CPU, SMD and PCB work on phone and tablet logic boards, so one set covers most of what lands on a GSM bench.

Choosing Between 138°C, 183°C and 199°C

Each paste solves a different thermal problem. The 138°C low-temperature paste suits heat-sensitive chips and boards where long exposure risks lifting pads or stressing neighbouring parts. Reach for it on a board that already took heat once, or in a crowded area packed with small components. The 183°C medium-temperature paste works as the general-purpose grade for everyday reballing and IC change karna jobs, and most technicians keep it as their default tin. The 199°C high-temperature paste covers CPU bonding work where you want a joint with a higher melting point than the lower grades give you.

Distributor listings describe the YCS formula as a balance of fluidity and stability. That balance matters when you tin through a stencil: the paste holds its shape, resists collapse and keeps the chip from shifting. Your hot air must reach the melting point of the grade you chose, so set your station to the paste, not the other way round.

Where It Fits in Your Reballing Workflow

Start with the dead phone on your repair bench and confirm a hardware fault before you touch the paste. Lift the IC with your hot air station, clean the pads with the desolder wick from the set, then apply paste through your stencil and reflow it into clean, even balls. Faults that send technicians to reballing include a boot loop issue, hang on logo, charging issue, network issue and a dead phone after a drop or a failed flash.

Having three grades lets you plan the order of work on multilayer boards. You tin and seat parts with the grade that suits each stage, which protects the joints you already finished. Check your result under a microscope before you close the board. A steady PCB holder and a stencil from your reballing kit keep the pads aligned while the paste reflows. Test the board with a multimeter and, where the fault involves storage, move on to your ISP pinout tool, eMMC programmer or UFS adapter for the next diagnostic step.

What to Check Before You Order

Each paste ships in a 50g pack, so a shop with several technicians gets enough material for regular volume. Store the packs sealed and away from heat so the paste stays smooth and workable. Match the grade to your soldering station or hot air station profile before you start, and keep the 138°C paste within reach for repeat rework on delicate boards. If your bench already has a hot air station and a reballing kit, this set completes the consumables side of your tin-planting routine without separate orders for each melting point.

Additional information
Weight0.50 kg
Q & A
Please login to post questions

Key Features

  • Three melting points in one set: 138°C, 183°C and 199°C
  • 50g pack for each paste grade
  • Includes a YCS 2015 desolder wick for pad cleaning
  • Formulated for BGA, CPU, IC, SMD and PCB repair
  • Balanced fluidity and stability for precise solder ball placement
  • Low viscosity change and no collapse during tinning
  • Bright, full solder joints when reflowed at the correct temperature
  • Portable packaging for workshop and field use

Specifications

BrandYCS
ModelYCS 4 in 1 Solder Paste Set
CategorySolder Paste & Flux
CompatibilityUniversal consumable for BGA, CPU, IC, SMD and PCB soldering repair
Supported DevicesMobile phone and tablet logic boards
TechnologyLow, medium and high temperature solder paste (138°C, 183°C, 199°C)
Set Contents3 × 50g solder paste (138°C, 183°C, 199°C) and 1 × YCS 2015 desolder wick

Common Repair Uses

  • Reballing, tin planting and pad repair on mobile and tablet boards, including:
  • BGA CPU reballing
  • IC change karna on mobile motherboards
  • Tinning pads after IC removal
  • Low-heat rework on sensitive chips
  • CPU bonding work with the 199°C grade
  • Pad rebuilding and solder joint repair
  • Fixing cold or weak joints behind a boot loop or hang on logo
  • General PCB and SMD soldering repair

Compatible Devices

  • Universal solder paste, not device-specific. It works on any board with BGA, CPU, IC, SMD or PGA solder joints, including:
  • Mobile phone logic boards
  • iPad and tablet motherboards
  • BGA CPU packages
  • BGA ICs
  • SMD components
  • PGA packages
  • General PCB soldering repair
  • Fine-pitch IC pads

FAQ

What is the product name?
The product name is YCS 4 in 1 Solder Paste Set for BGA CPU Reballing (138°C, 183°C, 199°C).
What is the brand of this product?
The brand of this product is YCS.
What is the model of this product?
The model of this product is YCS 4 in 1 Solder Paste Set.
What is this product used for?
This product is used for BGA, CPU, IC, SMD and PCB reballing and soldering repair on mobile phone and tablet logic boards.
Which devices are compatible with this product?
This product is a universal solder consumable. It works on mobile phone and tablet boards that use BGA, CPU, IC, SMD or PGA solder joints and is not tied to specific phone models.
Who should use this product?
This product is suitable for mobile repair technicians, repair shops, service centers, and professional users.
Which melting points does the YCS 4 in 1 solder paste set include?
The set includes three 50g solder pastes at 138°C low temperature, 183°C medium temperature and 199°C high temperature, plus a YCS 2015 desolder wick.
Which solder paste grade should I use for a heat-sensitive board or a general BGA reballing job?
Use the 138°C paste for heat-sensitive chips and repeat rework on delicate boards. Use the 183°C paste for everyday reballing, and the 199°C paste for CPU bonding work that needs a higher melting point.