SN2600B2 Charging IC for iPhone XS, XS Max and XR
₨ 350
SN2600B2 Charging IC for iPhone XS, XS Max and XR Repair
The SN2600B2 is a charging control IC from the SN2600 family, which supplier catalogs place at the U3300 position on iPhone XS, XS Max and XR logic boards. When your repair bench shows a phone that refuses to charge, the charging path is one of the first areas to test. Confirm the board position and part marking before ordering, because the device model alone does not guarantee a match. This listing covers the verified compatibility scope so you can plan the replacement with accurate information.
SN2600B2 Charging IC for iPhone XS, XS Max and XR Logic Boards
The SN2600B2 charging IC belongs to the SN2600 charging-control family, which supplier listings place at the U3300 position on iPhone XS, XS Max and XR boards. A phone that does not register a charger often points to this area of the logic board. Start your workflow with power-rail checks and a schematic review, then decide whether the IC is the fault. This product is a board-level component for technicians who already run diagnostics on a charging fault.
Where This IC Fits in the Charging Workflow
In a charging fault, this IC controls how incoming power reaches the battery path. Test the charging rails before you lift any part, so you know whether the fault sits upstream or at the IC. If the rails are present and the phone still refuses charge, the IC becomes the main suspect. Confirm the fault with a current reading on the charge line before you commit to a replacement.
Compatibility Scope and Part Marking
Supplier catalogs list the SN2600 family for iPhone XR, XS and XS Max. The SN2600B1 variant appears most often in those listings, and the SN2600B2 appears for the same device set. Read the marking on the removed chip and compare it with your board’s part number before you order. Do not assume a match from the device model alone.
Rework and Verification Notes
Use hot air with flux at the U3300 pads, and keep the board supported during reflow. After the joints cool, inspect them under a microscope for bridges and cold joints. Then test the charging path again before you return the device. Verify each step on your own bench, because the repair result depends on the board and the rework quality.
| Weight | 0.1 kg |
|---|
Key Features
- ✓Charging control IC from the SN2600 family
- ✓Sits at the U3300 position on supported iPhone logic boards
- ✓Identify by part marking before ordering
- ✓Suited for board-level charging-path repair
Specifications
| Model | SN2600B2 |
|---|---|
| Category | Mobile Phone ICs |
| Compatibility | iPhone XS, iPhone XS Max, iPhone XR (family-level scope) |
| Supported Devices | iPhone XS, iPhone XS Max, iPhone XR logic boards |
Common Repair Uses
- ✓Verified workflows for this charging IC.
- ✓Phone does not register a charger
- ✓Slow or intermittent charging
- ✓Dead phone after a failed charging attempt
- ✓Charging-path replacement on a board with confirmed IC fault
Compatible Devices
- ✓Verified scope is the SN2600 family at the U3300 position on the following models.
- ✓iPhone XS
- ✓iPhone XS Max
- ✓iPhone XR
FAQ
What is the product name?
What is the model of this product?
What is this product used for?
Which devices are compatible with this product?
Who should use this product?
Which iPhone models use the SN2600 charging IC?
Is the SN2600B2 the same as the SN2600B1?
Related products
358S IC T211 Samsung Tab Charging IC – Tab 3 USB Charger IC
In stock



