SN2012027 U2 Charging IC with 8N EEPROM for iPhone 15/16

₨ 3,000

U2 Charging IC With 8N EEPROM Data

This SN2012027 U2 charging IC comes paired with a data-programmed 8N EEPROM, so the stored board data travels with the chip. It is listed for the iPhone 15 series and the iPhone 16 series, including the Plus, Pro, and Pro Max models. Technicians use it for dead phones that stop charging below 1 percent, refuse to power on while plugged in, or ignore a USB-C charger entirely. Check the revision code against your donor board before you order, because the iPhone 15 and iPhone 16 families use different SN2012027 revisions.

Out of stock

13 People watching this product now!
Description

SN2012027 U2 Charging IC for iPhone 15 and 16 Series

The SN2012027 U2 charging IC controls how power from the charger reaches the battery on iPhone 15 and 16 series boards. It also manages the sleep and wake button, several USB functions, and the handoff to the main charging circuit. When this chip fails, the phone may drop out below 1 percent, refuse to start while connected to power, or show no reaction to a charger at all. This listing pairs the U2 with a data-programmed 8N EEPROM for the iPhone 15 series, so you can match the chip set to the board you are repairing.

Where the U2 Fits in the Charging Path

Charging on a modern iPhone moves through several stages, and the U2 sits near the start of that chain. It regulates the voltage that reaches the power management side, which keeps the battery charging at a safe rate. Repair reports on earlier iPhone models linked U2 failures to uncertified chargers and cables that do not regulate voltage properly. That pattern is worth raising with customers who return with a dead phone after using a cheap adapter.

Before you condemn the U2, confirm the battery, the USB-C port, and the charging rails with a multimeter. A shorted port or a weak battery can produce the same symptoms, and replacing the U2 will not fix either fault. Test the board in stages so you know exactly which component is responsible. This keeps your repair time short and your customer’s expectations realistic.

EEPROM Data: Replacing the U2 With or Without Transfer

The 8N EEPROM carries programmed data that matches each board, so the replacement method depends on whether that data survives the repair. If the original EEPROM data is intact, you can swap the U2 alone and skip flashing. If the data has been lost, you need to replace the chip together with the EEPROM that holds the programmed data. Read the original EEPROM with an ISP pinout tool or a compatible programmer before you lift the chip. That reading tells you which path applies.

Version matching matters at this step. Listing notes place the iPhone 15 series on the A12 revision, while the iPhone 16 series uses the A23 and A33 revisions. Confirm the code on both the donor and the replacement before you start the rework. A mismatch here causes a second return, even when the solder work is clean.

Workshop Fit and Pre-Order Checks

For a technician, this chip belongs in a charging-fault workflow. Confirm the symptom first, check the donor revision next, and then decide between a U2-only swap and a full chip-and-data replacement. A hot air station or soldering station handles the lift and seating. A microscope helps you inspect the pads for lifted traces and cold joints after rework.

Reballing kits and PCB holders keep the board steady during the process. Use a multimeter to check the charging rails after the swap so the fix is measured, not assumed. Most shops skip the version check at ordering, and that single step prevents the most common repeat visits. Keep ISP pinout tools and test boxes on the bench so the EEPROM read happens before any heat goes on the board.

Additional information
Weight0.1 kg
Q & A
Please login to post questions

Key Features

  • Paired with a data-programmed 8N EEPROM for the iPhone 15 series
  • Listed as the U2 charging IC for iPhone 15 through iPhone 16 Pro Max
  • Revision-specific: A12 for iPhone 15 series, A23 and A33 for iPhone 16 series
  • Supports a U2-only replacement when the EEPROM data is intact
  • Covers the U2 roles in charging, wake button, and USB control
  • Suited to dead phone and no-charge repair jobs
  • Requires a revision check against the donor board before ordering
  • Works with standard board-level rework and EEPROM read workflows

Specifications

ModelSN2012027
CategoryMobile Phone ICs
CompatibilityApple iPhone 15 series and iPhone 16 series
Supported DevicesiPhone 15, iPhone 15 Plus, iPhone 15 Pro, iPhone 15 Pro Max, iPhone 16, iPhone 16 Plus, iPhone 16 Pro, iPhone 16 Pro Max
TechnologyU2 charging IC paired with 8N EEPROM (data-programmed for iPhone 15 series)

Common Repair Uses

  • Charging-fault and power-path repairs on the boards listed above
  • Phone does not charge when the battery falls below 1 percent
  • Dead phone that will not power on while connected to a charger
  • Phone that fails to restart after a full battery drain
  • No response to a USB-C charger or cable
  • U2 replacement after a suspected uncertified charger failure
  • U2-only swap when the original EEPROM data is intact
  • Chip-and-data replacement when the EEPROM data is lost
  • Revision check across iPhone 15 and 16 donor boards before ordering

Compatible Devices

  • Apple iPhone 15 series and iPhone 16 series, matched by revision code
  • iPhone 15
  • iPhone 15 Plus
  • iPhone 15 Pro
  • iPhone 15 Pro Max
  • iPhone 16
  • iPhone 16 Plus
  • iPhone 16 Pro
  • iPhone 16 Pro Max

FAQ

What is the product name?
The product name is SN2012027 U2 Charging IC with 8N EEPROM.
What is the brand of this product?
This is an Apple iPhone U2 charging IC, and no separate manufacturer brand is listed.
What is the model of this product?
The model of this product is SN2012027.
What is this product used for?
This product is used to replace a faulty U2 charging IC on iPhone 15 and 16 series boards that fail to charge or power on.
Which devices are compatible with this product?
This product is compatible with iPhone 15, 15 Plus, 15 Pro, 15 Pro Max, 16, 16 Plus, 16 Pro, and 16 Pro Max boards, matched by revision.
Who should use this product?
This product is suitable for mobile repair technicians, repair shops, service centers, and professional users.
Does this chip need flashing after replacement?
If the original EEPROM data is intact, you can replace the U2 alone without flashing. If the data is lost, replace the chip together with the EEPROM that holds the programmed data.
Is the iPhone 15 and iPhone 16 version of this chip the same?
No. The iPhone 15 series uses the A12 revision, while the iPhone 16 series uses the A23 and A33 revisions, so confirm the code before ordering.