Light Coil 3X3 For TECNO Infinix 10Pcs | Backlight Boost
₨ 250
Backlight Boost Coil for TECNO and Infinix Boards
Light Coil 3X3 For TECNO Infinix 10Pcs is a 3×3 backlight boost coil for the display backlight circuit on TECNO and Infinix handsets. It replaces the inductor in the boost stage that stabilizes backlight output, a part that often fails after drops, heat damage, or long-term power stress. Each pack contains ten pieces, giving repair benches spares for repeat faults. It suits technicians diagnosing dim display, no backlight, or flickering screen faults who need a dependable replacement once the coil is confirmed as the cause. Check the coil position and size on your board before soldering.
The Light Coil 3X3 For TECNO Infinix 10Pcs is a 3×3 backlight boost coil, the small inductor that supports the boost stage feeding the display backlight on many TECNO and Infinix handsets. When this coil degrades, you usually see a dim screen, uneven or flickering brightness, or a display that stays dark while the touch panel and the phone still respond. Many faults in this group look like a dead LCD, so your first job is to confirm the backlight path before you replace the whole display. Power the board with a regulated bench supply, set a current limit that protects the board, and measure the backlight boost output where your board diagram or schematic shows it. A missing or unstable boost rail points you toward the coil, the boost IC, or the surrounding capacitors. Compare the faulty board with a known good board of the same model when you have one, since matching voltage readings make the fault location far clearer. Test the coil itself with a coil tester or a multimeter in continuity mode. An open reading or an unusually low reading suggests a damaged winding, though removing the coil from the circuit gives a more reliable result. Before you heat any part, check the adjacent capacitors for shorts, because a shorted capacitor will destroy a fresh coil within seconds of power-on. Remove the faulty coil with a hot air station at a controlled temperature, and apply flux first so the solder flows evenly. Clean the pads with solder wick, tin them lightly, and place the new 3×3 coil in the same orientation as the original footprint. Clean residual flux with isopropyl alcohol and a soft brush so the joints stay visible for inspection. Inspect the joints under a microscope for bridges between neighboring pads, especially where the boost IC sits close to the coil. Once the board is assembled, power it again on the bench and watch the current draw during the first boot. A stable current and a steady backlight at normal brightness confirm the repair. After the backlight is restored, test brightness across its full range, check for color tint or flicker at low brightness, and run the handset for several minutes under normal load to confirm the boost circuit stays in range. Heat is the main warning sign: a coil or IC that runs noticeably hot during the test points to a fault elsewhere on the boost path that a new coil alone will not fix. Listed compatibility for this part covers TECNO and Infinix boards, and the listing also references Huawei, Xiaomi, and Samsung boards that use the same coil type. Because exact model fit is not verified on every board, confirm the coil position and size on your specific model before ordering a full batch. The pack of ten pieces suits a repair bench that handles repeat backlight faults, since you can keep matched spares on hand and avoid waiting for a second order mid-job. Store the spares in labeled compartments, record which board families they fixed, and build a reference list for future jobs. That habit shortens diagnosis time and makes your repair history more reliable for customers who return with related faults. For service centers handling a steady flow of TECNO and Infinix display repairs, this part belongs with backlight ICs, display connectors, and power management components in the same bench kit. Buying these items together keeps your workflow moving from diagnosis to final test without delays.
| Weight | 0.1 kg |
|---|
Key Features
- ✓3x3 form factor for surface-mount backlight boost positions
- ✓Pack of 10 pieces for repeat-fault benches
- ✓Serves the display backlight boost stage
- ✓Listed for TECNO and Infinix backlight circuits
- ✓Suits hot air rework with flux and solder wick
- ✓Pairs with coil testers and multimeter continuity checks
- ✓Useful spare for dim, flickering, or dark display faults after diagnosis
- ✓Practical stock item alongside backlight ICs and display connectors
Specifications
| Brand Entity | TECNO, Infinix |
|---|---|
| Product Entity | 3x3 backlight boost coil (light coil) |
| Technology Entity | Inductor in a display backlight boost circuit |
| Compatible Device Entities | TECNO and Infinix mobile boards |
| Repair Process Entity | Backlight circuit diagnosis and SMD coil replacement |
| Industry Entity | Mobile phone repair parts, Pakistan |
Common Repair Uses
- ✓Replacing a faulty backlight boost coil after a dim or dead display diagnosis
- ✓Fixing flickering or uneven backlight on TECNO and Infinix boards
- ✓Restoring display light after heat damage near the boost IC
- ✓Hot air rework of small inductors during backlight repairs
- ✓Keeping matched spares for repeat backlight faults on the same board families
- ✓Coil testing during display circuit troubleshooting
Compatible Devices
- ✓TECNO handsets using a 3x3 backlight boost coil (family-level scope)
- ✓Infinix handsets using a 3x3 backlight boost coil (family-level scope)
- ✓Huawei, Xiaomi, and Samsung boards referenced in the seller listing for the same coil type
- ✓Model-level fit not verified; confirm coil position and size on your board
FAQ
What is the product name?
What is this product used for?
Which devices are compatible with this product?
Who should use this product?
How do I test a light coil before replacing it?
Can this coil be used on Samsung or Xiaomi boards?
Related products
339S0223 For iPad 5/Air1 A1474 Wifi IC – U5800 WiFi Module
In stock
343S0694 Touch IC U2402 iPhone 6 and 6 Plus Touch Black IC
In stock
U2 Charging iPhone 8, iPhone 8 Plus, iPhone X Chip – 1612A1
In stock



