JCID P15 BGA70 Nand Socket for iPhone NAND Read Write

₨ 21,000

BGA70 NAND Socket for P15 Programmer

JCID P15 BGA70 Nand Socket is a BGA70 module for the JCID P15 programmer, used to read, write and format Apple NAND flash chips in the BGA70 package. Technicians working on iPhone, iPad and Mac storage can seat a BGA70 chip on the programmer without switching to a different platform. It covers NAND read and write, formatting and storage repair jobs on the bench. Pair it with a matching BGA70 reballing stencil when the chip needs to be re-tinned after removal.

Out of stock

16 People watching this product now!
Description

JCID P15 BGA70 Nand Socket gives your bench a dedicated module for BGA70 Apple NAND chips when you run them on the JCID P15 programmer. Apple uses several NAND packages across iPhone, iPad and Mac logic boards, and BGA70 is one of the packages the P15 platform supports alongside BGA60, BGA110 and BGA315. Swapping the matching module is faster than rebuilding the setup for each chip, which matters when your shop handles a steady queue of storage jobs. The socket is built for technicians who already know what a NAND chip does and need a reliable way to connect it. Before you start, confirm the chip marking on the board matches BGA70, because the wrong module will not seat the chip correctly. JCIDRepair software has also been updated over time to improve P15 NAND read and write performance across the BGA modules, so keep your programmer software current before you begin a job. Typical work on this socket includes reading a NAND image before any repair, writing a corrected image back to the chip, and formatting the storage when a device is stuck in a boot loop after a failed write. Storage-related faults show up as a dead phone, a hang on logo, or a device that will not restore, and a BGA70 socket lets you check the chip directly instead of guessing from the board. Many of these jobs also end with a chip that needs removal and reballing, so a BGA70 stencil matched to the same package keeps the workflow consistent from read to reball. Work with the chip seated firmly and with the module locked, because a loose connection produces read errors that look like a faulty NAND. Save a backup image before any write operation, since a failed write on Apple NAND can leave a device unusable without a clean image to restore from. Keep the socket clean of flux residue after each job, because residue on the contacts causes intermittent reads that waste time during diagnosis. Store the module in its case when it is not in use, and avoid forcing a chip into the socket, since bent contacts will cause repeat failures on future jobs. For repair shops and service centers in Pakistan that handle iPhone and iPad storage faults, this socket fits into a standard NAND workflow: identify the package, seat the chip, read, verify, write, and confirm the device boots. Start each job by checking the chip package and board marking, then move through read, backup, repair and verification in the same order every time. This keeps your results repeatable across different devices and reduces the number of chips you need to rework.

Additional information
Weight0.2 kg
Q & A
Please login to post questions

Key Features

  • Supports BGA70 Apple NAND flash packages
  • Designed to work with the JCID P15 NAND programmer
  • Enables NAND read, write and format operations on the bench
  • Module-based design, so you swap the package without changing the programmer
  • Suitable for iPhone, iPad and Mac storage repair
  • Pairs with a BGA70 reballing stencil for chip re-tinning
  • Supports backup-first workflows before any NAND write
  • Built for professional repair shops and service centers

Specifications

BrandJCID
ModelP15 BGA70
CategoryNAND Programmer Module
CompatibilityJCID P15 Programmer
Supported DevicesApple iPhone, iPad and Mac NAND chips (BGA70 package)
TechnologyBGA70 NAND Flash Package

Common Repair Uses

  • Reading a BGA70 NAND chip before repair to capture a backup image
  • Writing a corrected NAND image back to a BGA70 chip
  • Formatting BGA70 NAND storage on devices stuck in a boot loop
  • Recovering a dead phone caused by a failed NAND write
  • Checking a suspect BGA70 chip directly on the programmer during storage diagnosis
  • Preparing a BGA70 chip for reballing with a matching stencil

Compatible Devices

  • Apple iPhone NAND chips in the BGA70 package (per supplier listing for JCID P15 BGA70 modules)
  • Apple iPad NAND chips in the BGA70 package
  • Apple Mac NAND chips in the BGA70 package
  • JCID P15 NAND programmer (module-level compatibility)

FAQ

What is the product name?
The product name is JCID P15 BGA70 Nand Socket.
What is the brand of this product?
The brand of this product is JCID.
What is this product used for?
This product is used to read, write and format BGA70 Apple NAND chips on the JCID P15 programmer.
Which devices are compatible with this product?
This product is compatible with Apple iPhone, iPad and Mac NAND chips in the BGA70 package, according to the supplier listing for JCID P15 BGA70 modules.
Which programmer does this BGA70 socket work with?
This socket is designed for the JCID P15 NAND programmer and works as a BGA70 module on that platform.
Which other BGA packages does the P15 cover besides BGA70?
The P15 platform supports BGA60, BGA110 and BGA315 modules, which are sold separately.