RF4 RF-PO16 Silicone Repair Pad 300x800mm
₨ 7,000
RF4 RF-PO16 Silicone Repair Pad for Motherboard Work
The RF4 RF-PO16 is a 300 × 800 mm silicone work pad from the RF4 PCB repair platform range. It gives your repair bench a clean, stable surface for motherboard IC and BGA soldering work on phones, tablets and computers. Its long format covers a wide area, so boards, tools and consumables can stay within reach while you work. The silicone surface is easy to clean with water and soap, which keeps it usable across repeated repair sessions.
Out of stock
RF4 RF-PO16 Silicone Repair Pad Overview
The RF4 RF-PO16 is built for technicians who need a large, dependable work surface on the bench. Its 300 × 800 mm size fits a full motherboard with room left for your tools. In the RF4 range, this model sits in the long-format category, which suits benches that hold several boards and accessories at once. Use it as the base layer for your repair workflow, from board inspection to soldering and rework.
Where It Fits in Your Repair Workflow
Most board-level work starts with a stable surface. Your workflow usually moves from inspection under the microscope to soldering or BGA rework, and then to testing. This pad supports each step by keeping the board from sliding while you apply flux, heat or solder. The long format also gives you space to lay out screws, stencils and chips in order, so you do not lose small parts during the job.
Working with Silicone on Your Bench
Silicone is a practical choice for repair benches because it resists slipping and is easy to maintain. The RF-PO16 surface can be cleaned with water and soap, which helps you remove flux residue and dust after each session. Keep the surface clear of sharp tools when it is not in use, and avoid leaving the board on the pad for long periods between sessions.
Pairing the Pad with Other RF4 Tools
The RF-PO16 works well alongside the wider RF4 PCB repair lineup. Other RF4 silicone pads in the range come in different sizes, such as 450 × 300 mm and 450 × 280 mm, so you can match the pad to your bench layout. The RF-PO88 microscope base provides a stable platform for close inspection, and it pairs naturally with a pad for hands-on soldering work.
| Weight | 2.21 kg |
|---|
Key Features
- ✓Large 300 × 800 mm working surface
- ✓Silicone material for a stable, non-slip base
- ✓Easy to clean with water and soap
- ✓Suitable for motherboard and BGA repair work
- ✓Part of the RF4 PCB repair platform range
- ✓Fits benches that handle multiple boards at once
Specifications
| Brand | RF4 |
|---|---|
| Model | RF-PO16 (RF-P016) |
| Category | PCB repair pad / silicone mat |
| Technology | Silicone |
| Material | Silicone |
| Dimensions | 300 × 800 mm |
Common Repair Uses
- ✓Holding motherboards during IC and BGA soldering
- ✓Working on boards during microscope inspection
- ✓Laying out screws, stencils and chips in order
- ✓Keeping flux and solder work contained on the bench
- ✓Protecting the bench surface during rework
- ✓Organizing repair consumables during a job
Compatible Devices
- ✓Universal — not device-specific (general PCB and motherboard repair work)
- ✓Mobile phone motherboards
- ✓Tablet motherboards
- ✓Laptop and computer motherboards
- ✓Mobile phone IC and BGA chips
- ✓PCB repair boards
- ✓Soldering and rework tasks
- ✓General electronics repair
FAQ
What is the product name?
What is the brand of this product?
What is the model of this product?
What is this product used for?
Which devices are compatible with this product?
Who should use this product?
What size is the RF4 RF-PO16 pad?
Can the silicone pad be cleaned with water?
Related products
ICFRIEND UFS eMMC ISP Adapter for MiPi Tester & F64 Box
In stock
RELIFE RL-004SA silicone pad – Anti-slip
In stock



