Relife RL-059D 0.03mm Screen Separation Cutting Wire
₨ 150
RL-059D 0.03mm Cutting Wire for LCD and OLED Screen Separation
The Relife RL-059D gives you 100 meters of 0.03mm carbon steel cutting wire for separating LCD and OLED assemblies on phones and tablets. You slide the thin line between the glass and the frame, then pull it through the adhesive to free the panel. The high-tensile alloy holds up under the tension you apply during the cut, and its anti-rust properties keep the wire ready through long workshop sessions. Flat, curved and edge displays all fall within its listed use, so one spool covers most separation jobs on your bench.
In stock
RL-059D 0.03mm Cutting Wire in the Mobile Repair Workflow
Every screen replacement starts with separation, and that step decides whether the glass or the display panel survives the job. The RL-059D 0.03mm cutting wire gives you a fine, flexible line that travels between the cracked panel and its frame, so you cut through the adhesive instead of levering the glass off. Technicians who handle display work daily know how fast a rushed pry can crack a panel or bend a frame. A fine cutting line gives you a controlled path through the adhesive instead. This section covers the wire’s material, the screen shapes it suits, a practical separation sequence, and where it fits in a typical refurbishment bench.
Wire Diameter, Material and Roll Length
The wire measures 0.03mm in diameter, which lets you feed it into tight gaps along the panel edge without forcing the frame. Thin wire also means you apply less force, which keeps pressure off the fragile glass during the cut. The roll runs 100 meters, so a single spool covers many repairs before you need a refill. The wire uses a high-tensile carbon steel alloy. High tensile strength helps the line hold its shape under the pull you apply while cutting. The same alloy brings high toughness and wear resistance, so the wire keeps its cutting edge through long sessions. Its anti-rust properties help it stay usable in damp workshop conditions, where bare steel tends to degrade. Store the spool dry and wipe off adhesive residue between jobs to preserve its condition.
Screen Shapes and a Practical Separation Sequence
The RL-059D suits flat, curved and edge screens on LCD and OLED assemblies, so one spool handles the common display shapes you meet on phones and tablets. Start by warming the display edge with a hot air station to soften the adhesive, which makes the cut easier and reduces stress on the glass. Hook the wire into the gap at a corner, then wrap each end around a handle so you can apply even tension. Work the wire along one side with steady back-and-forth strokes, and let the line travel through the adhesive rather than forcing it. On curved edges, ease the tension and follow the curve slowly so the wire does not kink. Patience matters more than speed here, because a slow, even cut produces fewer chipped edges than a fast, uneven one. Once the panel lifts free on one side, move to the next edge and repeat. Check the frame for stuck adhesive before you pull the panel away completely.
Where This Wire Fits on Your Bench
Technicians use this wire during display replacement, one of the most common jobs in mobile phone repair. It fits smartphone repair workshops, refurbishment lines that process used phones, tablet screen maintenance, and electronics repair centers. Pair it with a Hot Air Station for controlled adhesive softening and a PCB Holder to keep the device steady during separation. Once the panel comes away, you can move straight into board-level inspection under your microscope. When a display problem traces back to the glass rather than the panel, the same separation method applies. Keep a spare spool at the bench so a broken line never stops a repair in progress.
| Weight | 0.15 kg |
|---|
Key Features
- ✓Ultra-thin 0.03mm cutting wire for precise screen separation
- ✓High-tensile carbon steel alloy construction
- ✓High toughness and wear resistance for long working sessions
- ✓Anti-rust properties for workshop use
- ✓Flexible and easy to handle on the bench
- ✓100-meter roll for extended professional use
Specifications
| Brand | RELIFE |
|---|---|
| Model | RL-059D |
| Category | Screen Separation Special Cutting Wire |
| Compatibility | LCD and OLED screens, flat, curved and edge types (universal, not device-specific) |
| Supported Devices | Mobile phones and tablets |
| Material | High-tensile carbon steel alloy |
| Dimensions | 0.03mm wire diameter, 100 m roll length |
Common Repair Uses
- ✓Screen separation workflows for phone and tablet displays
- ✓Edge display separation
- ✓Smartphone repair workshop display work
- ✓Tablet screen maintenance
- ✓Electronics repair center display work
- ✓Mobile phone refurbishment
Compatible Devices
- ✓Universal, scoped to LCD and OLED screen shapes; not device-specific
- ✓Flat LCD screens
- ✓Flat OLED screens
- ✓Curved LCD and OLED screens
- ✓Edge LCD and OLED screens
- ✓Mobile phone and tablet displays
FAQ
What is the product name?
What is the brand of this product?
What is the model of this product?
What is this product used for?
Which devices are compatible with this product?
Who should use this product?
Can the RL-059D separate both LCD and OLED screens?
Does the RL-059D work on curved and edge screens?
Related products
RELIFE RL-004SA silicone pad – Anti-slip
In stock
UFI eMMC BGA Soldering Adapter (8 Footprints) for UFI-Box
In stock



