RF4 RF-PO11 Heat Resistant Silicone Pad 450x300mm

₨ 2,499

RF-PO11 Silicone Pad for Mobile Phone and PCB Rework

The RF4 RF-PO11 gives you a 450 × 300 mm silicone work pad for mobile phone and PCB rework. It handles heat up to 500°C, so your hot air and soldering work stays controlled on the surface. Its anti-static, flame-retardant silicone resists corrosion and wear. You can wipe it clean with thinner or PCB cleaner after flux work. Several holes hold screws, IC chips and small parts in place during a board teardown. Use it as a daily base for BGA removal, component replacement and motherboard service.

In stock

19 People watching this product now!
Description

RF-PO11 Heat Resistant Silicone Pad for Your Repair Bench

The RF4 RF-PO11 heat resistant silicone pad gives mobile technicians a stable, clean surface for board work. Its 450 × 300 mm area holds a motherboard, a microscope, and your tweezers and small parts at the same time. The silicone tolerates 500°C, which matters when your hot air gun or soldering iron runs close to the surface for long sessions. You get a workspace that resists heat, limits static, and stays tidy between jobs. This page explains where the pad fits in your repair workflow and what the material handles.

Heat Tolerance and Anti-Static Surface

Rework stresses a bench surface quickly. Hot air nozzles and soldering tips throw heat onto whatever sits below them, and cheaper mats bulge or scorch. This pad handles 500°C during BGA removal and IC reballing, and it resists bulging under that heat. The silicone is anti-static, which lowers the risk of discharge reaching a sensitive board while you probe or move components. Its flame-retardant formulation and corrosion resistance add a safety margin when flux and solder residue build up. Keep the pad under the board during reflow work, and check the surface after long hot-air sessions.

Storage Layout and Daily Bench Workflow

A busy bench fills up fast with screws, shields and loose ICs. Several holes on the RF-PO11 hold screws, IC chips and small parts in fixed positions, so nothing rolls off during a teardown. The large usable area keeps your hot air tip, tweezers, flux and multimeter within arm’s reach. Set the motherboard on the pad before you lift any component, then drop removed screws into their holes so you can match them during reassembly. Losing one tiny screw can cost you more time than the whole repair step. The pad also protects the desktop beneath it from scalding and solder splatter.

Cleaning, Memory and Long-Term Durability

Flux, solder splatter and thinner residue collect on repair mats after every job. You can wipe the silicone with thinner or PCB cleaning solution, and the surface holds up to that cleaning. The material is memory-repairable and wear-resistant, so light surface marks can recover over time instead of leaving a permanent dent. Store the pad flat and keep sharp tools away from it to extend its life. Replace it once the surface turns sticky or develops deep cuts that trap debris. Regular care keeps this work surface reliable across many repair cycles.

Additional information
Weight1.0 kg
Q & A
Please login to post questions

Key Features

  • Rated for 500°C high-temperature resistance
  • Anti-static silicone surface
  • Multi-functional storage with holes for screws, IC chips and small parts
  • Anti-wear and memory-repairable silicone
  • Flame-retardant material
  • Corrosion-resistant, no-bulge construction
  • Wipe-clean with thinner or PCB cleaner
  • Large 450 × 300 mm working area

Specifications

BrandRF4
ModelRF-PO11 (RF-P011)
CategoryRepair Work Mats
CompatibilityUniversal — not device-specific
TechnologyHigh-temperature resistant, anti-static silicone
MaterialSilicone
Dimensions450 × 300 mm

Common Repair Uses

  • Protecting the bench during hot air IC removal
  • Holding screws, IC chips and small parts during teardown
  • BGA reballing setup on a motherboard
  • Soldering and component replacement on phone PCBs
  • Work surface for microscope-based inspection
  • Cleaning board residue with thinner or PCB cleaner after flux work
  • Organizing tools and small parts during reassembly
  • Protecting the desktop from heat and solder splatter

Compatible Devices

  • Universal — not device-specific. The pad fits any board or device that fits its surface.
  • Mobile phone motherboards of any brand (surface fit, not device-specific)
  • Tablet logic boards
  • Laptop and desktop PCBs
  • Smartphone and tablet BGA chip work
  • Hot air rework and soldering stations
  • Microscope-assisted board repair
  • Small component and IC work
  • PCB service repair benches

FAQ

What is the product name?
The product name is RF4 RF-PO11 Heat Resistant Silicone Pad.
What is the brand of this product?
The brand of this product is RF4.
What is the model of this product?
The model of this product is RF-PO11 (RF-P011).
What is this product used for?
This product is used as a heat-resistant, anti-static work surface for mobile phone and PCB repair.
Which devices are compatible with this product?
This product is universal and not device-specific. It works with any board that fits its 450 × 300 mm surface.
Who should use this product?
This product is suitable for mobile repair technicians, repair shops, service centers, and professional users.
What is the maximum temperature this silicone pad can handle?
The silicone pad is rated for high-temperature resistance up to 500°C.
Can I clean this silicone pad with thinner or PCB cleaner?
Yes, you can wipe the pad with thinner or PCB cleaning solution.