RF4 RF-SD35 Phillips 1.5 Screwdriver for Mobile Repair
₨ 999
Phillips 1.5 Mobile Repair Screwdriver
The RF4 RF-SD35 Phillips 1.5 screwdriver gives you a dedicated +1.5 driver for the small cross-head screws inside iPhone and Android phones. The magnetic S2 alloy steel bit holds each screw on the tip, so fasteners stay under control on a crowded board. Built-in precision bearings keep the turning action smooth and quiet, and a laser-engraved identifier lets you pick the right driver from the bench at a glance. If your daily jobs include display problem repairs, battery replacement, or full phone teardown, this Phillips 1.5 screwdriver for mobile repair covers the +1.5 fasteners you meet along the way.
In stock
RF4 RF-SD35 Phillips 1.5 Screwdriver: Technical Overview
The Phillips 1.5 screwdriver for mobile repair in the RF4 RF-SD35 range targets technicians who want a fixed, clearly marked driver for +1.5 cross-head screws. RF4 positions the RF-SD35 as a mini screwdriver line for iPhone and Android repair, and the +1.5 option pairs a magnetic S2 alloy steel bit with a bearing-based turning action. You buy one purpose-sized driver, which keeps your repair bench organized and your screw handling precise.
Key Technical Highlights
The “+1.5” marking identifies the Phillips tip size. The RF-SD35 range also offers Y0.6, +2.5, 0.8, T2, and 1.2 options, so you can match each driver to the exact screw head you find inside a phone. The bit uses S2 alloy steel with a magnetic tip. That magnetism keeps the screw on the driver as you lift it out of the housing, which stops tiny fasteners from dropping onto a board or rolling off your mat. Precision bearings sit inside the driver, cut operating noise, and give you a smooth rotation. A laser-engraved identifier marks each driver, so you read the label instead of squinting at the tip under a microscope.
Repair Workflow Fit
Every phone that arrives with a charging issue, a display problem, or a hang on logo fault goes through the same first stage: you open the device and remove the screws before any board-level work starts. The Phillips 1.5 driver handles that opening stage and the closing stage. On a hardware fault job, you drop each screw into your tray, lift the bracket or shield, then move the board to a PCB holder or under your microscope for inspection. The magnetic tip helps you track every screw and refit it in the correct position at the end of the job. On dead phone cases that need an IC change karna job, the same driver clears the way to the board before your hot air station and soldering station take over.
Why a Single-Size Driver Works at the Bench
A multi-bit handle forces you to swap bits mid-job. A dedicated +1.5 driver stays ready in its slot, so you move from screw to screw without hunting for the right bit. Repair shops that run several benches often assign one driver per screw size, and the RF-SD35 range supports that habit with separate +1.5, +2.5, 0.8, T2, 1.2, and Y0.6 options. You build the set your shop needs and replace only the driver that wears first. Pair this driver with tweezers, opening tools, and a screen separator from your regular kit to complete a clean teardown routine.
Buying Notes for Pakistani Repair Shops
Check the screw heads on the models you service most before you order. If your daily work includes +1.5 fasteners, this driver earns its place on every bench. Shops that handle iPhone and Android repairs side by side benefit from the laser-engraved identifier, because new staff learn the driver sizes quickly and return each tool to its slot. Mechanicpk stocks the wider RF4 hand tools range, so you can add the other RF-SD35 sizes as your workload grows.
| Weight | 0.1 kg |
|---|
Key Features
- ✓Dedicated +1.5 Phillips driver for iPhone and Android phone repair
- ✓Magnetic S2 alloy steel bit
- ✓Strong magnetic adsorption that keeps small screws on the tip
- ✓Built-in precision bearings for smooth, noise-reducing operation
- ✓Laser-engraved identifier for quick driver selection
- ✓Part of the RF-SD35 range with +1.5, Y0.6, +2.5, 0.8, T2, and 1.2 options
Specifications
| Brand Entity | RF4 |
|---|---|
| Product Entity | RF4 RF-SD35 Phillips 1.5 Screwdriver |
| Technology Entity | Magnetic S2 alloy steel bit, precision bearing mechanism |
| Compatible Device Entities | iPhone, Android phones |
| Repair Process Entity | Mobile phone disassembly, screen replacement, battery replacement |
| Industry Entity | Mobile phone repair, electronics repair |
Common Repair Uses
- ✓Verified uses cover mobile phone teardown and reassembly work.
- ✓Mobile phone disassembly
- ✓Screen replacement
- ✓Battery replacement
- ✓Removing and refitting small cross-head screws during board access
- ✓General electronics repair involving +1.5 screws
Compatible Devices
- ✓Verified scope covers iPhone and Android phone repair, and other small electronics that use +1.5 cross-head screws. Confirm the screw size on your target model before you order.
- ✓iPhone models with +1.5 cross-head screws
- ✓Android phones with +1.5 cross-head screws
- ✓Other small electronics with +1.5 cross-head screws
FAQ
What is the product name?
What is the brand of this product?
What is the model of this product?
What is this product used for?
Which devices are compatible with this product?
Who should use this product?
What does the +1.5 mark on the RF-SD35 mean, and which screws does it fit?
Which other screw sizes does the RF4 RF-SD35 range offer?
Related products
ICFRIEND UFS eMMC ISP Adapter for MiPi Tester & F64 Box
In stock
UFI eMMC BGA Soldering Adapter (8 Footprints) for UFI-Box
In stock



