2UUL DA30 Camera Protective Sticker 7mm 12mm Pack
₨ 1,200
DA30 Camera Lens Repair Stickers
The 2UUL DA30 camera protective sticker shields the camera lens and Face ID dot matrix area while you open, heat, or clean a phone. The pack holds 1000 stickers, 500 in 7mm and 500 in 12mm, so you cover small front sensors and larger rear lenses with the right size. The stickers leave no adhesive residue, resist water, and block dust from reaching the lens. Your bench stays stocked for daily back glass, frame, and board work. Mechanicpk supplies the DA30 for Pakistani repair shops that want a clean camera and a working Face ID after every job.
In stock
2UUL DA30 Camera Protective Sticker for Daily Repair Work
The 2UUL DA30 camera protective sticker gives you a fast way to cover a camera lens or Face ID dot matrix module before you start a repair. Technicians open phones all day, and every open-case job exposes the camera to dust, flux splash, and fingerprints. A lens that comes back scratched or dusty turns a finished job into a complaint. The DA30 costs little per piece and removes that risk. Mechanicpk stocks it as a core consumable for repair shops, service centers, and training benches across Pakistan.
Pack Contents and Size Coverage
The DA30 ships as a 1000-piece pack from 2UUL: 500 stickers in 7mm and 500 in 12mm. The two diameters match the lens sizes you meet most often. The 7mm sticker fits smaller camera openings and front-facing modules, including the dot matrix area on Face ID phones. The 12mm sticker covers wider rear lenses on both iPhone and Android devices. You pick the size that fits the lens and press it on, with no cutting and no tape scraps. Because the pack holds so many pieces, you use a fresh sticker on every job instead of reusing a dusty one.
Lens and Face ID Protection During Repair
The adhesive on the DA30 releases without leaving residue, so you peel the sticker off and the lens surface stays clean. The material resists water and keeps dust away, which matters when you strip a back glass, clean a frame, or separate a screen on an open bench. Dust inside a Face ID dot matrix module triggers Face ID failure, so covering that area during repair protects a fault you cannot always fix afterward. Rear camera glass stays free of scratches and fingerprints while your tweezers, spudgers, and blades work nearby. The sticker also suits tablets, laptops, and other devices with camera lenses, so one pack serves your whole bench.
Where It Fits in Your Repair Workflow
Place the sticker at the start of the job, right after you open the device. You keep it on through back glass replacement, frame cleaning, adhesive removal, and board-level work near the camera area. Pair it with your hot air station and soldering station routine: cover the lens first, then rework the board, then peel the sticker off at final assembly. Under your microscope, a covered lens also shows you immediately which parts you have already protected. Repair shops that handle display problem jobs, charging issue boards, and hardware fault cases all open phones with cameras in reach, so the DA30 earns its place on every bench, from a single-technician counter to a multi-bench service center.
Mechanicpk stocks 2UUL consumables and the wider range of repair accessories, PCB holders, reballing kits, and rework tools that keep your workflow consistent. Order the DA30 in bulk, keep a stack on every bench, and stop spending money on camera replacements caused by avoidable dust and scratches.
| Weight | 0.1 kg |
|---|
Key Features
- ✓1000-piece pack with 500 x 7mm and 500 x 12mm stickers
- ✓Two sizes cover small front sensors and larger rear lenses
- ✓No adhesive residue on removal
- ✓Water-resistant material
- ✓Dustproof protection for the lens and Face ID dot matrix area
- ✓Works on phones, tablets, laptops, and other camera-equipped devices
- ✓Fits iPhone and Android rear and front cameras
- ✓Low cost per job, so you use a fresh sticker every time
Specifications
| Brand | 2UUL |
|---|---|
| Model | DA30 |
| Category | Mobile Phone Repair Consumables, Camera Protective Sticker |
| Compatibility | Universal — mobile phones, tablets, laptops, and other devices with camera lenses |
| Supported Devices | iPhone and Android rear and front cameras |
| Pack Contents | 1000 pieces (500 x 7mm, 500 x 12mm) |
Common Repair Uses
- ✓Camera and Face ID protection while the device is open on the repair bench
- ✓Back glass replacement
- ✓Frame and housing cleaning
- ✓Screen separation and display replacement
- ✓Adhesive and glue removal around the camera area
- ✓Hot air rework on boards near the camera module
- ✓Soldering and board-level repair with the camera still installed
- ✓Face ID dot matrix protection during open-case repair
- ✓Dust protection for tablets and laptops during service
Compatible Devices
- ✓Universal camera lens coverage (not device-specific), in 7mm and 12mm sizes
- ✓iPhone rear camera lenses
- ✓iPhone front camera and Face ID dot matrix area
- ✓Android rear main camera lenses
- ✓Android front camera lenses
- ✓Samsung, Oppo, Vivo, Infinix, and Tecno phones with matching lens sizes
- ✓Tablet cameras
- ✓Laptop camera lenses
- ✓Other electronic devices with a camera lens of 7mm or 12mm
FAQ
What is the product name?
What is the brand of this product?
What is the model of this product?
What is this product used for?
Which devices are compatible with this product?
Who should use this product?
Which sticker sizes come in the 2UUL DA30 pack?
Does the DA30 camera sticker leave residue on the lens?
Related products
RELIFE RL-004SA silicone pad – Anti-slip
In stock



