OSS Team C210-020 Soldering Iron Tip
₨ 700
C210-020 Fine Conical Soldering Tip
The OSS Team C210-020 soldering tip gives C210-standard handles a slender conical point for precision board-level work. The C210 cartridge format places the heating element inside the tip, so heat reaches the joint quickly and recovers fast between pads. You use this tip for SMD rework, FPC pad retouching, solder bridge removal and jumper wire attachment on dense phone motherboards. It suits technicians who already run a T210-style station and want a dedicated micro-point for their finest jobs. Mechanicpk supplies it as a single-piece replacement tip for repair shops and service centers across Pakistan.
Out of stock
C210-020 Soldering Tip for Fine-Pitch Mobile Board Repair
The OSS Team C210-020 soldering tip gives your C210-standard handle a fine conical point for work that chisel and bevel tips cannot reach. The C210 format places the heating element inside the tip itself, so heat reaches the solder joint with less lag than a traditional 900M-style iron delivers. This C210-020 soldering tip suits board-level technicians who lift small SMD parts, retouch FPC pads and clear tiny solder bridges on crowded phone motherboards. If a T210-style station already sits on your repair bench, this tip works as a replacement cartridge or as a dedicated micro-point for your most delicate jobs.
Cartridge Design and Tip Profile
C210 is a cartridge tip standard. The heater sits inside the tip, which explains the quick heat-up and fast recovery that technicians expect from this platform. The C210 range targets precision soldering with medium power requirements, and its small size suits SMD work under a microscope. The 020 position in the C210 numbering series is a fine conical profile: a slender, pointed shape that concentrates heat on a very small contact area. That focus lets you touch a single pad without disturbing its neighbours. OSS Team ships the tip as one piece. You pair it with a compatible C210 handle and a station that drives that handle. C210 cartridges use a different fitment from 900M-T tips, so check your handle type before you order.
Where the Tip Fits in Your Repair Workflow
Fine conical tips earn their place in micro-soldering. You reach for this tip when a job demands accuracy over thermal mass. Typical work includes jumper lagana on a broken trace, rebuilding a lifted pad on a USB charging port after a charging issue, tacking down a small connector, and removing a solder bridge between two pins of a fine-pitch IC. On a dead phone with a damaged power path, the point lets you work between tightly packed capacitors and resistors beside the PMIC without cooking the surrounding parts.
Pair the tip with a microscope and a stable PCB holder so your hand stays steady at this scale. For larger operations such as IC change karna on BGA parts, your hot air station and reballing kit remain the right tools. This tip handles the retouch, cleanup and finishing steps around that work. Use multimeter checks before and after each repair to confirm continuity on the pads you touched.
Tip Care and Bench Setup
Tin the tip before first use and again before you store it, which slows oxidation and keeps heat transfer consistent. Clean the point on brass wool or a damp sponge before and after each session, and never leave the tip running dry. Seat the tip fully in the handle so it makes proper contact with the heating element. Lead-free solder needs more heat than leaded alloy, so raise your station temperature gradually and watch how the joint flows instead of jumping to a high setting. Fresh flux under the point improves wetting on small pads and reduces the need to hold heat on the board. A clean, well-tinned tip protects delicate pads and extends the working life of every cartridge you buy.
| Weight | 0.5 kg |
|---|
Key Features
- ✓Fine conical point for single-pad precision
- ✓C210 cartridge format with integrated heating element
- ✓Fast heat-up and quick recovery between joints
- ✓Fits C210-series and T210-style handles
- ✓Suits SMD work under a microscope
- ✓Works with lead-free and leaded solder
- ✓Supplied as a single replacement tip
- ✓Fits compact bench setups for board-level repair
Specifications
| Brand | OSS Team |
|---|---|
| Model | C210-020 |
| Category | Soldering Iron Tips |
| Compatibility | C210-series handles, T210-style handles and stations |
| Technology | C210 cartridge-style tip with integrated heating element |
| Package Contents | 1 x Soldering Iron Tip |
Common Repair Uses
- ✓Precision soldering and touch-up work at board level
- ✓SMD component removal and replacement
- ✓Solder bridge removal on fine-pitch IC pins
- ✓Charging port pad repair
- ✓Jumper wire attachment on broken traces
- ✓FPC and connector pad retouching
- ✓Pad cleaning and tinning before reballing
- ✓Micro-soldering under a microscope
- ✓Finishing work after hot air rework
Compatible Devices
- ✓Universal — not phone-model-specific; the tip works on any mobile board you can reach with a C210-standard handle
- ✓Android smartphone motherboards (Samsung, Oppo, Vivo, Infinix, Tecno)
- ✓iPhone logic boards
- ✓Charging port pads
- ✓Battery connector pads
- ✓FPC and display connector pads
- ✓Camera module connector pads
- ✓Small SMD resistors and capacitors
- ✓Fine-pitch IC pins
FAQ
What is the product name?
What is the brand of this product?
What is the model of this product?
What is this product used for?
Which devices are compatible with this product?
Who should use this product?
Is the C210-020 tip compatible with T210 handles?
Can the C210-020 tip replace a 900M-T tip?
Related products
RELIFE RL-004SA silicone pad – Anti-slip
In stock



