TE-153 5in1 Glue Removal Blade Set for Mobile Repair

₨ 450

TE-153 5in1 Glue Removal Blades

The TE-153 glue removal blade set packs five blades into one kit for clearing epoxy and hardened glue from mobile phone boards. You use it around CPU, eMMC, NAND, and power ICs before an IC change karna job, reballing, or board cleaning. Each blade reaches a different gap, so you stop forcing one edge into tight corners. Pair it with a hot air station and a microscope on your repair bench for slow, controlled cleanup that protects pads and neighbouring components. Mechanicpk supplies the TE-153 to technicians, repair shops, and service centers across Pakistan.

Out of stock

17 People watching this product now!
Description

TE-153 Glue Removal Blade Set for Board-Level Cleanup

The TE-153 glue removal blade set gives you five blades in one kit for the slowest part of board-level repair: clearing hardened glue and epoxy around CPUs, eMMC chips, and other ICs. On a dead phone that needs an IC change, the glue around the chip decides how clean your rework goes. Five blades let you match the edge to the gap, the corner, or the stubborn patch in front of you, instead of forcing one blade to do every job. Mechanicpk stocks the TE-153 for Pakistani technicians who handle hardware faults daily and want a dedicated glue removal tool rather than a makeshift scraper.

Where the Blades Fit in Your Repair Workflow

Glue removal sits between diagnosis and rework. You confirm the hardware fault, secure the board in a PCB holder, and soften the glue with a hot air station. Then you reach for the TE-153 blades to lift the softened glue away from the IC edges and the surrounding pads. A clean chip edge lets you remove the IC with less force, which protects the board when you work on a boot loop issue caused by a damaged eMMC or a dead after flash board that needs a chip swap. Once the glue clears, you move on to reballing kits, soldering stations, or test boxes, depending on the job.

The same blades help before programming work. Cleaning glue from around an IC exposes the edges and test points you need for ISP pinout tools and eMMC programmers, so your jumper lagana and probe placement stay accurate.

Technique Notes for Cleaner Results

Keep the blade at a shallow angle and work in short, controlled strokes. Check your progress under a microscope, because glue hides pad edges and nearby SMD components until you clear it. Warm the board first so the glue softens, and stop pushing as soon as the blade meets resistance. Forcing a cold, hardened patch risks lifting a pad. After cleaning, wipe the area with isopropyl alcohol and test continuity with a multimeter before you reflow or reball. Rotate through the five blades as the glue pattern changes across the board. Wide edges clear open areas fast, and narrow edges reach the gaps beside shields and neighbouring ICs.

Why Technicians Choose a Five-Blade Set

A single scraper forces compromises. One blade wears down on large areas and then fails in the corner where you need precision. A five-in-one set spreads the work across several edges, so each blade stays useful longer and your hands stay steady across a full day of board jobs. For a repair shop handling charging issue boards, network issue boards, and hang on logo boards in the same shift, one compact kit covers every glue-heavy IC on the bench. The TE-153 works as a universal hand tool, so you use it on Android and iPhone boards without worrying about connector types or chipset families.

You can build a complete cleanup station around it. Combine the TE-153 with a hot air station, a microscope, a PCB holder, and a reballing kit, and you cover the full path from glued IC to a freshly reballed chip. Repair shops and service centers across Lahore, Karachi, and Islamabad order this kind of set in quantity because blades wear with use, and a spare kit keeps the bench running.

Additional information
Weight0.1 kg
Q & A
Please login to post questions

Key Features

  • Five blades in a single TE-153 kit
  • Targets glue and epoxy around CPU, eMMC, NAND, and power ICs
  • Suits hand-controlled work under a microscope
  • Works alongside a hot air station that softens glue first
  • Universal use across Android and iPhone boards
  • Supports pad-safe cleanup before reballing
  • Exposes IC edges and test points before ISP or eMMC work
  • Compact kit fits any repair bench

Specifications

ModelTE-153
CategoryGlue Removal Blade Set
CompatibilityUniversal, not device-specific

Common Repair Uses

  • Glue and epoxy cleanup in board-level mobile repair.
  • Clearing glue around CPU edges before removal
  • Cleaning epoxy around eMMC and NAND chips before an IC change
  • Exposing IC edges and test points before ISP or eMMC programmer work
  • Removing glue from pads before reballing
  • Cleaning boards after a failed or partial IC lift
  • Scraping softened glue after hot air heating
  • Preparing power IC and charging IC areas for replacement
  • General board cleaning during hardware fault diagnosis

Compatible Devices

  • Universal hand tool, not device-specific. It works on any phone, tablet, or small electronics board where glue or epoxy covers an IC.
  • Android smartphone motherboards
  • iPhone motherboards
  • Tablet motherboards
  • CPU and SoC packages with edge glue or underfill
  • eMMC, UFS, and NAND memory ICs
  • Power ICs and PMICs
  • Charging ICs
  • Boards with glued shields and neighbouring SMD components

FAQ

What is the product name?
The product name is TE-153 5in1 Glue Removal Blade Set.
What is the model of this product?
The model of this product is TE-153.
What do you use this product for?
You use the TE-153 to remove glue and epoxy from around CPU, eMMC, NAND, and other ICs on mobile phone boards.
Which devices are compatible with this product?
The TE-153 is a universal hand tool. It works on any phone, tablet, or small electronics board where glue covers an IC.
Who should use this product?
This product suits mobile repair technicians, repair shops, service centers, and professional users.
Do I need a hot air station to use the TE-153 for glue removal?
Hot air makes the job safer. Warm the board first so the glue softens, then lift it with the blade in short strokes. Forcing cold, hardened glue risks lifting a pad.
Does the TE-153 work on both Android and iPhone boards?
Yes. The TE-153 is a manual blade tool with no connector or chipset limit, so you use it on Android and iPhone boards wherever glue covers an IC.